CT Meets

Renesisking · 05-30-2010, 12:37 PM

Hi everyone. I haven't been on here in a long time but I figured I'd let everyone know that there are Mazda meets going on quite often in the summer. A bunch of friends and I on Mazdas247 and RX8club meet up in Danbury twice a month, ususally on the 2nd and 4th week of the month. It would be cool to see a few more rotaries and especially some older ones. So far there are quite a few Speed3s, Speed6s, and only 3-4 Rotaries. We get some decent get togethers and we just check out each others cars and share info and get some ideas on builds and opinions. I know I would like to see a few more rotaries as well. The next meet is on the 9th, I'll let you guys know where, if anybody is interested.

***TitaniumTT*** · 05-30-2010, 08:30 PM

Post up the locations and times and I'll try to make it up. I lived in Danbury for a while so I know it pretty well.

Renesisking · 05-30-2010, 11:44 PM

Will do bud. Its usually at 8PM, we've been kicked out of the mall and Stew Leonards so we're trying to find a place where we won't be bothered. I guess its hard for others to realize that we're not riced out Hondas.

Renesisking · 05-31-2010, 11:56 AM

Hey Brian, you plan on going to the OCC meet??? I think we are having a drive down on the 5th, a whole bunch of Mazdas.

***TitaniumTT*** · 05-31-2010, 09:20 PM

As of right now I am. We'll see how tomorrow goes with the fuel cell. but yeah, plan on me attending. Where's the caravan leaving from?

Renesisking · 05-31-2010, 10:04 PM

Not sure yet, someone was saying meeting up at Exit 2 in Danbury, but I'm not 100% sure yet.

Renesisking · 06-16-2010, 11:45 PM

Brian and anyone else, there is an AutoX this weekend sponsored by FCSCC.

http://www.fcscc.com/

***TitaniumTT*** · 06-17-2010, 07:33 AM

My cars running.......... well......... but the rear end is fragged so I won't be able to attend for a few weeks. I hate cars

Renesisking · 06-17-2010, 10:07 AM

haha, what happened?? You are always doing something to that thing.

***TitaniumTT*** · 06-17-2010, 10:18 AM

The last diff that I had came with a bent pinion. Bent by about 12 thou. Just enough to make the fucker vibrate like a bastard. I couldn't figure it out, didn't think to check that, gave it to Dave and he found that problem. So I bought a ring/pinion from a member and gave it to Dave to set up seeing as he found the problem, he should get the job to fix it right? Well, the ring gear had some step wear so @ 5 thoug backlash it wold lock, it wouldn't turn smooth until 20 though backlash. That's apparently too much becuase the fucker clunks and clanks around, howls and grinds and is just a general bitch.

Let me make this clear - this was NOT Dave's fault by any stretch of the imagination. We knew this might happen going into it and I decided to flip the coin. Bad move. You can't polish a turd and you can't build things right with bad parts. My fault, not Daves.

vex · 06-30-2010, 11:58 AM

Quote:

Originally Posted by TitaniumTT

The last diff that I had came with a bent pinion. Bent by about 12 thou. Just enough to make the fucker vibrate like a bastard. I couldn't figure it out, didn't think to check that, gave it to Dave and he found that problem. So I bought a ring/pinion from a member and gave it to Dave to set up seeing as he found the problem, he should get the job to fix it right? Well, the ring gear had some step wear so @ 5 thoug backlash it wold lock, it wouldn't turn smooth until 20 though backlash. That's apparently too much becuase the fucker clunks and clanks around, howls and grinds and is just a general bitch.

Let me make this clear - this was NOT Dave's fault by any stretch of the imagination. We knew this might happen going into it and I decided to flip the coin. Bad move. You can't polish a turd and you can't build things right with bad parts. My fault, not Daves.

False! You can totally polish a turd. Have you not seen that myth busters?

***TitaniumTT*** · 06-30-2010, 06:35 PM

I have not........... not entirely sure I want to either. What kind of wierd shit are you into?

Renesisking · 07-21-2010, 05:24 PM

I know this is late notice but there is a meet today at Coldstone by the Danbury mall if anyone is interested in going. PM me if you don't know how to get there.

05-30-2010, 12:37 PM	#1
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	CT Meets Hi everyone. I haven't been on here in a long time but I figured I'd let everyone know that there are Mazda meets going on quite often in the summer. A bunch of friends and I on Mazdas247 and RX8club meet up in Danbury twice a month, ususally on the 2nd and 4th week of the month. It would be cool to see a few more rotaries and especially some older ones. So far there are quite a few Speed3s, Speed6s, and only 3-4 Rotaries. We get some decent get togethers and we just check out each others cars and share info and get some ideas on builds and opinions. I know I would like to see a few more rotaries as well. The next meet is on the 9th, I'll let you guys know where, if anybody is interested. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

05-30-2010, 08:30 PM	#2
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Post up the locations and times and I'll try to make it up. I lived in Danbury for a while so I know it pretty well. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-30-2010, 11:44 PM	#3
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	Will do bud. Its usually at 8PM, we've been kicked out of the mall and Stew Leonards so we're trying to find a place where we won't be bothered. I guess its hard for others to realize that we're not riced out Hondas. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

05-31-2010, 11:56 AM	#4
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	Hey Brian, you plan on going to the OCC meet??? I think we are having a drive down on the 5th, a whole bunch of Mazdas. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

05-31-2010, 09:20 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	As of right now I am. We'll see how tomorrow goes with the fuel cell. but yeah, plan on me attending. Where's the caravan leaving from? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-31-2010, 10:04 PM	#6
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	Not sure yet, someone was saying meeting up at Exit 2 in Danbury, but I'm not 100% sure yet. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

06-16-2010, 11:45 PM	#7
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	Brian and anyone else, there is an AutoX this weekend sponsored by FCSCC. http://www.fcscc.com/ __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

06-17-2010, 07:33 AM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	My cars running.......... well......... but the rear end is fragged so I won't be able to attend for a few weeks. I hate cars __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-17-2010, 10:07 AM	#9
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	haha, what happened?? You are always doing something to that thing. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech

06-17-2010, 10:18 AM	#10
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	The last diff that I had came with a bent pinion. Bent by about 12 thou. Just enough to make the fucker vibrate like a bastard. I couldn't figure it out, didn't think to check that, gave it to Dave and he found that problem. So I bought a ring/pinion from a member and gave it to Dave to set up seeing as he found the problem, he should get the job to fix it right? Well, the ring gear had some step wear so @ 5 thoug backlash it wold lock, it wouldn't turn smooth until 20 though backlash. That's apparently too much becuase the fucker clunks and clanks around, howls and grinds and is just a general bitch. Let me make this clear - this was NOT Dave's fault by any stretch of the imagination. We knew this might happen going into it and I decided to flip the coin. Bad move. You can't polish a turd and you can't build things right with bad parts. My fault, not Daves. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

06-30-2010, 06:35 PM	#12
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I have not........... not entirely sure I want to either. What kind of wierd shit are you into? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

07-21-2010, 05:24 PM	#13
Renesisking Rotary Fan in Training Join Date: May 2009 Location: Connecticut iTrader: (0) Posts: 39 Rep Power: 0	I know this is late notice but there is a meet today at Coldstone by the Danbury mall if anyone is interested in going. PM me if you don't know how to get there. __________________ 2004 RX-8. I would love to tune it but can't find the right parts for Microtech