1980 rx7 carb high rise

codysa22c · 04-05-2010, 07:37 PM

i need the name of a high rise that will fit and work with a 1980 rx7 im changing the carb.....i think im gonna get a holly 600cfm or a edlebrock 600cfm but it wont fit so i need a high rise

12arotary · 04-05-2010, 09:19 PM

why do you need a carb that massive?

codysa22c · 04-06-2010, 10:00 AM

why wouldnt i want a carb that massive.......

FerociousP · 04-06-2010, 11:42 AM

Quote:

Originally Posted by codysa22c

why wouldnt i want a carb that massive.......

because you don't understand how carbs work.

12arotary · 04-06-2010, 10:24 AM

because there is no point? i'm running a 600 double pumper on a 12a, under 14psi of boost and it is still too big

PercentSevenC · 04-06-2010, 01:07 PM

Racing Beat intake manifolds are nice.

I would go with a 465 or maybe 500 for a stock 12A.

ducktape · 05-21-2010, 12:01 PM

I've got a Racing Beat manifold for 12a that will fit a Holley if you're interested.

SLIDN2 · 06-16-2010, 07:37 PM

I had a edelbock 600 on my 12a but my engine was streetported and i was running a supercharger on it.
600 is to big bro.

codysa22c · 06-18-2010, 01:50 AM

ok so a 500 would work just fine would i still need a high rise

t_g_farrell · 06-18-2010, 10:37 AM

These aren't generic v8s, there are no off the shelf high rise intakes
or adaptors.

What you need is an intake manifold for a 12a engine. You can get one
at www.racingbeat.com, www.mazdatrix.com and maybe other places.

Or you can post a wanted add in the classifieds and get a used one or
look in the classifieds and see if anyone is selling what your looking for.

Kentetsu · 06-19-2010, 06:19 AM

But before you invest money in that direction, you might want to familiarize yourself with the stock carb so that you can make an informed decision. Do some reading over at Sterling's site: www.sterlingmetalworks.com

Once you fully understand what you have (assuming you currently have a stock carb) then you can decide where you want to go, and the best way to get there.

.

04-05-2010, 07:37 PM	#1
codysa22c The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 29 Rep Power: 0	1980 rx7 carb high rise i need the name of a high rise that will fit and work with a 1980 rx7 im changing the carb.....i think im gonna get a holly 600cfm or a edlebrock 600cfm but it wont fit so i need a high rise Last edited by Phoenix7; 05-28-2010 at 04:36 AM.. Reason: edited title for relevance

04-05-2010, 09:19 PM	#2
12arotary tumor-syphilis-itis-osis Join Date: Sep 2008 iTrader: (0) Posts: 191 Rep Power: 17	why do you need a carb that massive? __________________ 82 300d 82 Gsl 84 b2200 Diesel 88 gxl

04-06-2010, 10:24 AM	#5
12arotary tumor-syphilis-itis-osis Join Date: Sep 2008 iTrader: (0) Posts: 191 Rep Power: 17	because there is no point? i'm running a 600 double pumper on a 12a, under 14psi of boost and it is still too big __________________ 82 300d 82 Gsl 84 b2200 Diesel 88 gxl

06-16-2010, 07:37 PM	#8
SLIDN2 Self Proclamed Genius Join Date: Jun 2010 Location: Houston iTrader: (0) Posts: 21 Rep Power: 0	I had a edelbock 600 on my 12a but my engine was streetported and i was running a supercharger on it. 600 is to big bro. __________________ BRAP BRAP BRAP BRAP...

06-18-2010, 10:37 AM	#10
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	These aren't generic v8s, there are no off the shelf high rise intakes or adaptors. What you need is an intake manifold for a 12a engine. You can get one at www.racingbeat.com, www.mazdatrix.com and maybe other places. Or you can post a wanted add in the classifieds and get a used one or look in the classifieds and see if anyone is selling what your looking for. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

04-06-2010, 10:00 AM	#3
codysa22c The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 29 Rep Power: 0	why wouldnt i want a carb that massive.......

05-21-2010, 12:01 PM	#7
ducktape Hardcore Join Date: Apr 2010 Location: Louisville, Ky iTrader: (0) Posts: 88 Rep Power: 15	I've got a Racing Beat manifold for 12a that will fit a Holley if you're interested.

06-18-2010, 01:50 AM	#9
codysa22c The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 29 Rep Power: 0	ok so a 500 would work just fine would i still need a high rise

06-19-2010, 06:19 AM	#11
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan iTrader: (1) Posts: 530 Rep Power: 17	But before you invest money in that direction, you might want to familiarize yourself with the stock carb so that you can make an informed decision. Do some reading over at Sterling's site: www.sterlingmetalworks.com Once you fully understand what you have (assuming you currently have a stock carb) then you can decide where you want to go, and the best way to get there. . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1