Billet oil filter pedestal, block of plates, Vband kit

eyecandy · 02-12-2010, 12:37 PM

Billet oil filter pedestal w/ 2 npt ports for sensors includes all hardware NEW $50
http://i240.photobucket.com/albums/f...s/DSC_0043.jpg
Torsen Differential BRAND NEW w/ new bearings installed $650 (torsen lsd w/bearings ONLY this is pulled from a brand new differential housing, note the factory white markings) $1400 from Mazdatrix Direct swap in for the FC, just bolt on your ring gear and good to go!!
http://i240.photobucket.com/albums/f...s/DSC_0597.jpg
http://i240.photobucket.com/albums/f...s/DSC_0599.jpg
http://i240.photobucket.com/albums/f...s/DSC_0602.jpg

Crank angle sensor $25
S5 plastic water pump outlet $5

Box of FD engine parts and most will work with FC $100

Oil pump (+chain/gear) 2x, Rear stationary gear, Dowel pins 2x, Dowel Rods 2x (bolting engine together), Front counter weight, front pulley hub and bolt, 2 sets of main pullies with CAS gear (can be used if you swap an FD water pump, looks tons better!)

I am open to some reasonable offers, PRICES DO NOT INCLUDE SHIPPING, send me your zipcode and we will get that worked out. I accept paypal (preferred) to seeltuned@aol.com , money orders, checks (need to clear first), or cash for pick ups are always welcome. Send me a pm or email me at seeltuned@aol.com

Thanks for looking and be sure to check out my other threads!

eyecandy · 02-27-2010, 11:15 PM

bump!

infernosg · 02-28-2010, 05:20 PM

Additional details on oil pedestal (NPT size, etc.)?

djmtsu · 02-28-2010, 09:17 PM

Looks like an REspeed pedestal.

You can check it out at his website.

http://mrcmfg.com/catalog/

infernosg · 03-01-2010, 11:42 AM

Quote:

Originally Posted by djmtsu

Looks like an REspeed pedestal.

You can check it out at his website.

http://mrcmfg.com/catalog/

Looks a little different to me. Perhaps revision 1? The one above is circular and looks to have two 1/8" NPT ports while the most recent REspeed is more oblong in shape with one 1/8" NPT and one 3/8" NPT ports.

djmtsu · 03-01-2010, 11:53 AM

Yes, the version 1. I used to have one. Nice piece!

infernosg · 03-01-2010, 11:57 AM

Quote:

Originally Posted by djmtsu

Yes, the version 1. I used to have one. Nice piece!

Tempting seeing as I have oil pressure/temperature gauges and a nice gauge pod ready to go in

To the OP, would you be willing to do $65 shipped?

eyecandy · 03-01-2010, 02:24 PM

Yea the NPT 1/8" for both, I have one on my FD for my Defi oil pressure and temp, works great! Even has plugs if you do not have gauges at this time, but the most important factor is no spillage when changing the filter.

FC Zach · 03-01-2010, 05:01 PM

V-Band flange kit, Mild steel 3" $25
http://i240.photobucket.com/albums/f...c/DSC_0727.jpg

This still up for sale? I know someone interested, I'll let them know and get back to you if it is.

eyecandy · 03-11-2010, 08:47 PM

Open to offers!

FC Zach · 03-12-2010, 09:55 AM

Sorry bud, the guy needed a 2.5" V-Band flange kit. I tried though.

eyecandy · 03-12-2010, 10:32 AM

Thats cool, I already sold it anyways

eyecandy · 03-23-2010, 09:48 PM

Block of plates sold!

eyecandy · 04-01-2010, 08:43 PM

Lowered prices and added a few parts

eyecandy · 04-09-2010, 10:44 AM

Torsen sold!

02-12-2010, 12:37 PM	#1
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Billet oil filter pedestal, block of plates, Vband kit Billet oil filter pedestal w/ 2 npt ports for sensors includes all hardware NEW $50 http://i240.photobucket.com/albums/f...s/DSC_0043.jpg Torsen Differential BRAND NEW w/ new bearings installed $650 (torsen lsd w/bearings ONLY this is pulled from a brand new differential housing, note the factory white markings) $1400 from Mazdatrix Direct swap in for the FC, just bolt on your ring gear and good to go!! http://i240.photobucket.com/albums/f...s/DSC_0597.jpg http://i240.photobucket.com/albums/f...s/DSC_0599.jpg http://i240.photobucket.com/albums/f...s/DSC_0602.jpg Crank angle sensor $25 S5 plastic water pump outlet $5 Box of FD engine parts and most will work with FC $100 Oil pump (+chain/gear) 2x, Rear stationary gear, Dowel pins 2x, Dowel Rods 2x (bolting engine together), Front counter weight, front pulley hub and bolt, 2 sets of main pullies with CAS gear (can be used if you swap an FD water pump, looks tons better!) I am open to some reasonable offers, PRICES DO NOT INCLUDE SHIPPING, send me your zipcode and we will get that worked out. I accept paypal (preferred) to seeltuned@aol.com , money orders, checks (need to clear first), or cash for pick ups are always welcome. Send me a pm or email me at seeltuned@aol.com Thanks for looking and be sure to check out my other threads! Last edited by eyecandy; 04-01-2010 at 08:43 PM..

02-28-2010, 05:20 PM	#3
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA iTrader: (5) Posts: 811 Rep Power: 15	Additional details on oil pedestal (NPT size, etc.)? __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

02-28-2010, 09:17 PM	#4
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Looks like an REspeed pedestal. You can check it out at his website. http://mrcmfg.com/catalog/ __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-01-2010, 11:53 AM	#6
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Yes, the version 1. I used to have one. Nice piece! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-01-2010, 02:24 PM	#8
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Yea the NPT 1/8" for both, I have one on my FD for my Defi oil pressure and temp, works great! Even has plugs if you do not have gauges at this time, but the most important factor is no spillage when changing the filter. Last edited by eyecandy; 03-01-2010 at 02:28 PM..

02-27-2010, 11:15 PM	#2
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	bump!

03-01-2010, 05:01 PM	#9
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	V-Band flange kit, Mild steel 3" $25 http://i240.photobucket.com/albums/f...c/DSC_0727.jpg This still up for sale? I know someone interested, I'll let them know and get back to you if it is. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

03-11-2010, 08:47 PM	#10
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Open to offers!

03-12-2010, 09:55 AM	#11
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Sorry bud, the guy needed a 2.5" V-Band flange kit. I tried though. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

03-12-2010, 10:32 AM	#12
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Thats cool, I already sold it anyways

03-23-2010, 09:48 PM	#13
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Block of plates sold!

04-01-2010, 08:43 PM	#14
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Lowered prices and added a few parts

04-09-2010, 10:44 AM	#15
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	Torsen sold!