Post your engine bay pics

88turboii · 12-01-2008, 09:17 AM

every forum needs onoe of these threads..

i just finished installing the front strut brace, boost controller, and launch control yesterday. the brace is not the best fit, i had to lose the upper A/C line, but i wnat to keep A/C on this car so i will have to make a custom line to fit. the fan needed trimming also, and both the fuseblock and boost sensor brackets had to be moved

djmtsu · 12-01-2008, 05:35 PM

This was taken right after I installed the TII engine, during shakedown.

Not much has changed except for a Apexi Twin Chamber, and the fan shroud is back on.

FerociousP · 12-01-2008, 05:58 PM

I changed water pump and painted it and the housing as well as relocated my autometer water sensor to the back all at the same time and it looks much cheaner... too bad it has low oil pressure

rx7 FC TII · 12-01-2008, 09:36 PM

i need to get some new pics. these are kinda old.

dregg100 · 12-02-2008, 10:18 AM

jamin, no front mount yet?

88turboii · 12-02-2008, 02:42 PM

Quote:

Originally Posted by dregg100

jamin, no front mount yet?

nope i finally got the boost controller installed yesterday.. turned it up to 15psi no problems lol IATs only got up to about 130F. but that will proalby get a lot worse in the summer

jecr · 12-02-2008, 12:39 PM

djmtsu · 12-02-2008, 12:48 PM

I cannot get over how odd that diesel looks in an FC. Although it strangely looks like it was meant to be there.

FerociousP · 12-02-2008, 12:54 PM

did you know that your left front strut is missing? you may want to get that looked at.

jecr · 12-02-2008, 11:06 PM

Quote:

Originally Posted by FerociousP

did you know that your left front strut is missing? you may want to get that looked at.

I took the pic when the brakes were being fixed and the struts were being replaced a couple of months ago.

josh18_2k · 12-02-2008, 10:28 PM

one of these things is not like the other

Tinman · 12-12-2008, 10:03 AM

rotorhead87 · 02-20-2009, 07:42 AM

Then:

Now:

bigtony08 · 02-27-2009, 04:09 PM

heres mine

My5ABaby · 12-27-2010, 04:45 PM

Need moar!

12-01-2008, 09:17 AM	#1
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC iTrader: (0) Posts: 395 Rep Power: 17	Post your engine bay pics every forum needs onoe of these threads.. i just finished installing the front strut brace, boost controller, and launch control yesterday. the brace is not the best fit, i had to lose the upper A/C line, but i wnat to keep A/C on this car so i will have to make a custom line to fit. the fan needed trimming also, and both the fuseblock and boost sensor brackets had to be moved __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

12-01-2008, 05:35 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	This was taken right after I installed the TII engine, during shakedown. Not much has changed except for a Apexi Twin Chamber, and the fan shroud is back on. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

12-01-2008, 05:58 PM	#3
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro iTrader: (2) Posts: 1,046 Rep Power: 18	I changed water pump and painted it and the housing as well as relocated my autometer water sensor to the back all at the same time and it looks much cheaner... too bad it has low oil pressure __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

12-02-2008, 10:18 AM	#5
dregg100 Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 432 Rep Power: 17	jamin, no front mount yet? __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

12-02-2008, 12:39 PM	#7
jecr The Newbie Join Date: Sep 2008 iTrader: (0) Posts: 22 Rep Power: 0	__________________ 93 VR RX-7 (277rwhp @10psi) 86 Diesel (Isuzu) powered RX-7

12-01-2008, 09:36 PM	#4
rx7 FC TII Rotary Fanatic Join Date: Feb 2008 Location: hoover iTrader: (0) Posts: 161 Rep Power: 17	i need to get some new pics. these are kinda old.

12-02-2008, 12:48 PM	#8
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	I cannot get over how odd that diesel looks in an FC. Although it strangely looks like it was meant to be there. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

12-02-2008, 12:54 PM	#9
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro iTrader: (2) Posts: 1,046 Rep Power: 18	did you know that your left front strut is missing? you may want to get that looked at. __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

12-02-2008, 10:28 PM	#11
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR iTrader: (0) Posts: 473 Rep Power: 17	one of these things is not like the other __________________

12-12-2008, 10:03 AM	#12
Tinman Rotary Fan in Training Join Date: Feb 2008 Location: Central Ohio iTrader: (0) Posts: 36 Rep Power: 0

02-20-2009, 07:42 AM	#13
rotorhead87 Rotors > Pistons Join Date: Sep 2008 Location: Port Saint Lucie, Florida iTrader: (0) Posts: 316 Rep Power: 17	Then: Now: __________________ *UPDATED 06/15/2009* Check out My VMIC Turbo 13B-RE FC3S build

12-27-2010, 04:45 PM	#15
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	Need moar! __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."