4-Rotor Kit Group Buy! Defined Autoworks

GtoRx7 · 12-12-2014, 06:26 PM

Finally after much development we are proud to announce our 4 rotor kit group buy!

Never before has a company based in the U.S. offered such a service. I have already kick started the process and have enough of the complex parts on the shelf to build 4 sets of 4-rotor engines.

Why go with Defined Autoworks?

My personal 4-rotor has been running flawlessly while being beaten on the racetrack at over 10,000rpm without skipping a beat. Making over 610rwhp (720+hp) its currently one of the highest documented 4-rotors naturally aspirated.

Why go to a place that has never even built a 4-rotor? Why go to a place that has never even raced and tested a 4 rotor sucessfully? Those are the good questions to ask.

The infamous build video-

Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video] - YouTube

Being in the U.S. gains another massive advantage, no more shipping of your valuable parts overseas. Shipping round trip of four cast iron housings is over $2500.

This cost is saved and the risk of damage or customs withholding your parts eliminated.

4-rotors are complex machines, and the undertaking not for the faint of heart. I'm sure there will be many questions and I welcome all to help explain what is being offered or what else is needed. Anyone involved in this group buy will get technical support from me personally. While this is not a unlimited amount of time, I will assist in the general assembly or advice from my years building multi rotor motors.

Additional items to compliment the 4-rotor kits-

We are a one stop shop. I build and fabricate custom drysump kits that will out-flow the mazda comp units. The regulator is externally adjustable and the length of the engine is reduced.

Also offered is fully cnc made slide throttle setup. Provides the best power and flow of any intake. Fully roller bearing supported and reliable.

Lastly if anyone wants other 4-rotor parts, such as full p-port housings or lightened rotors, anything can be provided from A-Z. Full builds and complete engines are no issue.

Only part not in stock is the 4-rotor eccentric shaft due to the cost. Wait for this item is 2-6 months.

4-rotor kit pricing-

2 person group buy $9200
3 person group buy $8700
4 person group buy $8200
5 person group buy $7700
6+ person group buy $7500

Things needed to be sent in-

Two front stationary gears, One 86+ front counterweight, Two intermediate irons to be modified, will need front and rear cast iron plate for center line machining.

Slide throttle assembly pricing-

2 person group buy $3900
3 person group buy $3400
4+ person group buy $3000

Defined Auto Competition drysump setup

2 person group buy $5000
3 person group buy $4800
4+ person group buy $4200

4-rotor slide throttle

Drysump system

RICE RACING · 12-12-2014, 08:04 PM

My personal 4-rotor has been running flawlessly while being beaten on the racetrack at over 10,000rpm without skipping a beat. Making over 610rwhp (720+hp) its currently one of the highest documented 4-rotors naturally aspirated.

^ Videos please! have not herd from you in a long time!

GtoRx7 · 12-12-2014, 09:59 PM

Watch "4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…" on YouTube
4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…: http://youtu.be/0yFUiaNTQJs

I sadly lost a bunch of vids from a go pro going missing. But here is this one

RICE RACING · 12-12-2014, 10:52 PM

Quote:

Originally Posted by GtoRx7

Watch "4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…" on YouTube
4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…: http://youtu.be/0yFUiaNTQJs

I sadly lost a bunch of vids from a go pro going missing. But here is this one

Yeah seen it ages ago,

got the dyno sheet of the power output at 10k rpm?

GtoRx7 · 12-12-2014, 11:59 PM

http://www.rx7club.com/build-threads-292/page4/

Will be in this build thread.

djmtsu · 12-13-2014, 09:42 AM

Where the hell is my winning lottery ticket??

The Cosmo definitely needs this! (to twist the frame like a damn pretzel)!!!

But it would be worth it!!

GtoRx7 · 12-13-2014, 03:00 PM

Cosmo 4 rotor, world's first and would be epic!

djmtsu · 12-13-2014, 03:07 PM

Hells yeah!

Did you guys ever sell yours? I hope not, I would love to have an exhaust system made for mine.

GtoRx7 · 12-13-2014, 07:34 PM

Quote:

Originally Posted by djmtsu

Hells yeah!

Did you guys ever sell yours? I hope not, I would love to have an exhaust system made for mine.

No I still have it, but it is for sale. I go back and forth all the time, but really have my eye on a different car to take is place in the garage haha.

grantrx4 · 12-13-2014, 04:04 PM

Even at $10,000 it's fairly damn cheap especially with the £-$ exchange rate!!

GtoRx7 · 12-13-2014, 07:38 PM

Quote:

Originally Posted by grantrx4

Even at $10,000 it's fairly damn cheap especially with the £-$ exchange rate!!

Thank you! There is actually 3 people who are signed up for the group buy already. Putting it down to 8700 already. I'll update the list

1) member #1
2) member #2
3 ) Rxmfn7 ( dependant on 6 joining )
4)
5)
6)

Fendamonky · 12-16-2014, 10:06 AM

Gawd... I'm with Dj... So much want! If you guys are still doing this in 10 years I may be able to afford one then

12-12-2014, 09:59 PM	#3
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	Watch "4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…" on YouTube 4 Rotor Rx7 Track Break-in. Limited 7k RPM. Defin…: http://youtu.be/0yFUiaNTQJs I sadly lost a bunch of vids from a go pro going missing. But here is this one __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-12-2014, 11:59 PM	#5
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	http://www.rx7club.com/build-threads-292/page4/ Will be in this build thread. __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-13-2014, 09:42 AM	#6
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Where the hell is my winning lottery ticket?? The Cosmo definitely needs this! (to twist the frame like a damn pretzel)!!! But it would be worth it!! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

12-13-2014, 03:00 PM	#7
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	Cosmo 4 rotor, world's first and would be epic! __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-13-2014, 03:07 PM	#8
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Hells yeah! Did you guys ever sell yours? I hope not, I would love to have an exhaust system made for mine. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

12-12-2014, 06:26 PM	#1
GtoRx7 Rotary Fanatic Join Date: Jul 2008 iTrader: (0) Posts: 151 Rep Power: 17	4-Rotor Kit Group Buy! Defined Autoworks Finally after much development we are proud to announce our 4 rotor kit group buy! Never before has a company based in the U.S. offered such a service. I have already kick started the process and have enough of the complex parts on the shelf to build 4 sets of 4-rotor engines. Why go with Defined Autoworks? My personal 4-rotor has been running flawlessly while being beaten on the racetrack at over 10,000rpm without skipping a beat. Making over 610rwhp (720+hp) its currently one of the highest documented 4-rotors naturally aspirated. Why go to a place that has never even built a 4-rotor? Why go to a place that has never even raced and tested a 4 rotor sucessfully? Those are the good questions to ask. The infamous build video- Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video] - YouTube Being in the U.S. gains another massive advantage, no more shipping of your valuable parts overseas. Shipping round trip of four cast iron housings is over $2500. This cost is saved and the risk of damage or customs withholding your parts eliminated. 4-rotors are complex machines, and the undertaking not for the faint of heart. I'm sure there will be many questions and I welcome all to help explain what is being offered or what else is needed. Anyone involved in this group buy will get technical support from me personally. While this is not a unlimited amount of time, I will assist in the general assembly or advice from my years building multi rotor motors. Additional items to compliment the 4-rotor kits- We are a one stop shop. I build and fabricate custom drysump kits that will out-flow the mazda comp units. The regulator is externally adjustable and the length of the engine is reduced. Also offered is fully cnc made slide throttle setup. Provides the best power and flow of any intake. Fully roller bearing supported and reliable. Lastly if anyone wants other 4-rotor parts, such as full p-port housings or lightened rotors, anything can be provided from A-Z. Full builds and complete engines are no issue. Only part not in stock is the 4-rotor eccentric shaft due to the cost. Wait for this item is 2-6 months. 4-rotor kit pricing- 2 person group buy $9200 3 person group buy $8700 4 person group buy $8200 5 person group buy $7700 6+ person group buy $7500 Things needed to be sent in- Two front stationary gears, One 86+ front counterweight, Two intermediate irons to be modified, will need front and rear cast iron plate for center line machining. Slide throttle assembly pricing- 2 person group buy $3900 3 person group buy $3400 4+ person group buy $3000 Defined Auto Competition drysump setup 2 person group buy $5000 3 person group buy $4800 4+ person group buy $4200 4-rotor slide throttle Drysump system __________________ DEFINED AUTOWORKS Where concept meets results Black 1994 FD 4-rotor 610rwhp all motor Red 1970 Mazda R-100 with 10a Black 1974 Mazda Rx4 Black 1984 Gsl-SE 13b-re streetport 230rwhp

12-12-2014, 08:04 PM	#2
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia iTrader: (0) Posts: 1,688 Rep Power: 17	My personal 4-rotor has been running flawlessly while being beaten on the racetrack at over 10,000rpm without skipping a beat. Making over 610rwhp (720+hp) its currently one of the highest documented 4-rotors naturally aspirated. ^ Videos please! have not herd from you in a long time! __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

12-13-2014, 04:04 PM	#10
grantrx4 The Newbie Join Date: Dec 2012 iTrader: (0) Posts: 10 Rep Power: 0	Even at $10,000 it's fairly damn cheap especially with the £-$ exchange rate!!