D series 20B for sale

Jetlude · 11-16-2011, 03:49 PM

Got this engine which I planned to put in my FD but I decided to do another project instead, so I am selling. This engine has never been opened, but should be in good condition. All apex seals look intact when viewed through exhaust ports, and makes decent compression on each rotor face when cranked by hand.

Price $5000.00 OBO.
I also have a FD gearbox from Japan to mate with this engine if needed.

A trade for a 2JZ engine with tranny will be considered.

730RWHP12A · 11-17-2011, 10:00 AM

where are you located?

silverfdturbo6port · 11-23-2011, 12:03 AM

i hate doing this but id hate to see someone get ripped off
http://www.rx7club.com/showthread.ph...9#post10872659

PortedRotorTuner · 12-11-2011, 12:45 AM

Quote:

Originally Posted by silverfdturbo6port

i hate doing this but id hate to see someone get ripped off
http://www.rx7club.com/showthread.ph...9#post10872659

says "Invalid Thread specified. If you followed a valid link, please notify the administrator"

silverfdturbo6port · 12-14-2011, 11:41 PM

well they deleted both of his thread off of the rx7club site and now there is a new one. now he is asking 3500 shipped but when i had the cash for 4000 shipped he wanted to charge me more. the moderators are looking into things on the rx7club site

Jetlude · 12-15-2011, 04:40 PM

Quote:

Originally Posted by silverfdturbo6port

well they deleted both of his thread off of the rx7club site and now there is a new one. now he is asking 3500 shipped but when i had the cash for 4000 shipped he wanted to charge me more. the moderators are looking into things on the rx7club site

From the day I posted my first 20B for sale/trade thread on another forum silverfdturbo6port has been trying to damage my credibility for selfish reasons.To deter potential buyers. My thread most likely was taken down because of negative posts made by silverfdturbo6port casting suspisions that were unfair to me since they were without merit. After investigations by moderators I was given permission to put it back up. If I did something wrong I would not be allowed to post it again.
http://www.rx7club.com/showthread.php?t=980228 (I did not see any rules against posting links on this forum. Please forgive me if a am wrong)

Please see this message sent to me by email by silverfdturbo6port.

From: whiteturbo876port@hotmail.com
To: belew@live.com
Subject: RE: 20b
Date: Tue, 22 Nov 2011 20:08:06 -0800

i have been scammed before and by brother (lawer) had a long battle with the 20b i ripped off on last year. I really would like to buy your 20b. I did post on your thread to deturr people from buying this from you as i have my mind set that i want your 20b. lets figure out a deal here and make this happen. by the way i dont want the trans so shipping should be less

My 20B is 100% legit and available, current price $3500.00 OBO w/shipping negotiable and I AM NOT OUT TO STEAL ANYONE'S MONEY

SilverfdturboSport, I kindly ask you to stop this selfish behaviour, just as you said in your email, its unprofessional.

silverfdturbo6port · 12-15-2011, 05:16 PM

The message you have posted is not the whole conversation SIR. You are now trying to cover yourself up by not posting any other info to our conversation.
I have only tried to bring to attention to others that you have been shady with this deal. I could easily start posting your personal emails but last time i checked that is againsed forum rules.?
You might want to include the rest of the conversation as well include what was said over phone.
Im not here to ruin any credibility but only to show others that there is something wrong. I had 4000$ cash to send and you told me you wanted more when i went to send you the money. But here you are willing to sell it for 3500$ instead of the 4000$ that you had it up for sale originally.
Now ask yourself if you were going to give someone YOU DONT KNOW 4000$ and he acted the way that you have, would you find this all a little fishy?I think so.

I have been with the rotary community for a long time and i have sold lots of parts. I have never had a issue with being dishonest ever. I also have never been selfish and this is far from being selfish. You are the one who wanted to charge me more and now will sell it for less.

ReZ311 · 12-15-2011, 03:42 AM

0 posts.... Hmmm. S H A D Y.

Jetlude · 01-15-2012, 11:35 AM

Dropping the price to $3000.00, taking the shipping costs into consideration.

Jetlude · 01-28-2012, 09:30 PM

The engine is Sold. Thanks to all who showed genuine intrest.

11-16-2011, 03:49 PM	#1
Jetlude The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 13 Rep Power: 0	D series 20B for sale Got this engine which I planned to put in my FD but I decided to do another project instead, so I am selling. This engine has never been opened, but should be in good condition. All apex seals look intact when viewed through exhaust ports, and makes decent compression on each rotor face when cranked by hand. Price $5000.00 OBO. I also have a FD gearbox from Japan to mate with this engine if needed. A trade for a 2JZ engine with tranny will be considered. Last edited by Jetlude; 02-05-2012 at 04:54 PM..

11-17-2011, 10:00 AM	#2
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california iTrader: (8) Posts: 349 Rep Power: 17	where are you located? __________________ rotaryshack.com

12-15-2011, 05:16 PM	#7
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	The message you have posted is not the whole conversation SIR. You are now trying to cover yourself up by not posting any other info to our conversation. I have only tried to bring to attention to others that you have been shady with this deal. I could easily start posting your personal emails but last time i checked that is againsed forum rules.? You might want to include the rest of the conversation as well include what was said over phone. Im not here to ruin any credibility but only to show others that there is something wrong. I had 4000$ cash to send and you told me you wanted more when i went to send you the money. But here you are willing to sell it for 3500$ instead of the 4000$ that you had it up for sale originally. Now ask yourself if you were going to give someone YOU DONT KNOW 4000$ and he acted the way that you have, would you find this all a little fishy?I think so. I have been with the rotary community for a long time and i have sold lots of parts. I have never had a issue with being dishonest ever. I also have never been selfish and this is far from being selfish. You are the one who wanted to charge me more and now will sell it for less. Last edited by silverfdturbo6port; 12-15-2011 at 05:21 PM..

12-15-2011, 03:42 AM	#8
ReZ311 KM48 Burnout Join Date: Apr 2010 Location: Ventura County, CA iTrader: (0) Posts: 91 Rep Power: 15	0 posts.... Hmmm. S H A D Y. __________________ - Red 93 FD - Dust Collector - Fichtel & Sachs KM48 Lawnmower engine Single Rotor Mowerbike. You should "Like" the Mowerbike on FB - 11 VW GTI -DSG - 12 BMW X5 Diesel

11-23-2011, 12:03 AM	#3
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	i hate doing this but id hate to see someone get ripped off http://www.rx7club.com/showthread.ph...9#post10872659

12-14-2011, 11:41 PM	#5
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	well they deleted both of his thread off of the rx7club site and now there is a new one. now he is asking 3500 shipped but when i had the cash for 4000 shipped he wanted to charge me more. the moderators are looking into things on the rx7club site

01-15-2012, 11:35 AM	#9
Jetlude The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 13 Rep Power: 0	Dropping the price to $3000.00, taking the shipping costs into consideration.

01-28-2012, 09:30 PM	#10
Jetlude The Newbie Join Date: Dec 2009 iTrader: (0) Posts: 13 Rep Power: 0	The engine is Sold. Thanks to all who showed genuine intrest.