How much oil for the shifter resovoir? (pic)

ppritchard · 03-16-2008, 02:29 PM

Does oil just belong in the small area where the ball sits or is it supposed to be more than that? Also what type of oil? Does it make its way into the transmiission or is this area sealed in some way?

a7xh7 · 03-16-2008, 06:21 PM

oh the thread is here too

fill high enough to the top lip of the inner circle where the shifter bushing sits. fill both inner and outer.

ppritchard · 03-16-2008, 07:23 PM

Thanks! and double thanks for checking more than one site!

ppritchard · 03-16-2008, 07:26 PM

What type of oil is the best for this area? My notes say tranny oil, but I'm not sure if this resovoir is all by itself or somehow intersects with the tranny. Don't want to mess anything up. Plus -- is tranny oil the same thing as automatic transmission fluid or is it a regular oil?

a7xh7 · 03-16-2008, 09:47 PM

its not the same as auto tranny fluid. its not regular oil either. its tranny fuild.. 75w-90 gear oil, use it

ppritchard · 03-17-2008, 07:11 PM

Whatever you are using in the tranny is fine. Most say Redline or Amsoil.
I went to Pep Boys and they didn't have the Red Line, but they had a couple of gear oils in the same viscosity, the one I got was labeled as a synchro type oil.
Put it in up to the level and the shifts are pretty smooth. Probably doesn't make as much difference as changing the tranny to a synthetic, but it does help.

Signal 2 · 03-19-2008, 09:09 AM

Liberally grease the ball pivot and lower bushing too.

McVicker · 03-20-2008, 12:54 AM

Quote:

Originally Posted by Signal 2

Liberally grease the ball pivot and lower bushing too.

I would replace it with a new one while the shifter is out, if you are installing a new shifter/short shifter. I think someone makes an upgraded one, but OEM works just fine.

FD3S2005 · 03-19-2008, 11:04 PM

i dont think i have any in my shifter last time i looked

Signal 2 · 03-22-2008, 03:36 PM

Quote:

Originally Posted by FD3S2005

i dont think i have any in my shifter last time i looked

I think the FSM specifies grease on the lower pivot-bushing as well as the main ball pivot. Someone once suggested marine grease as it might adhere better in the gear oil bath. I've never tried it, but it couldn't hurt.

03-16-2008, 02:29 PM	#1
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando iTrader: (0) Posts: 43 Rep Power: 0	How much oil for the shifter resovoir? (pic) Does oil just belong in the small area where the ball sits or is it supposed to be more than that? Also what type of oil? Does it make its way into the transmiission or is this area sealed in some way?

03-16-2008, 06:21 PM	#2
a7xh7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 88 Rep Power: 0	oh the thread is here too fill high enough to the top lip of the inner circle where the shifter bushing sits. fill both inner and outer. __________________ "sevens_ix"

03-16-2008, 09:47 PM	#5
a7xh7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 88 Rep Power: 0	its not the same as auto tranny fluid. its not regular oil either. its tranny fuild.. 75w-90 gear oil, use it __________________ "sevens_ix"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-16-2008, 07:23 PM	#3
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando iTrader: (0) Posts: 43 Rep Power: 0	Thanks! and double thanks for checking more than one site!

03-16-2008, 07:26 PM	#4
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando iTrader: (0) Posts: 43 Rep Power: 0	What type of oil is the best for this area? My notes say tranny oil, but I'm not sure if this resovoir is all by itself or somehow intersects with the tranny. Don't want to mess anything up. Plus -- is tranny oil the same thing as automatic transmission fluid or is it a regular oil?

03-17-2008, 07:11 PM	#6
ppritchard Rotary Fan in Training Join Date: Feb 2008 Location: Orlando iTrader: (0) Posts: 43 Rep Power: 0	Whatever you are using in the tranny is fine. Most say Redline or Amsoil. I went to Pep Boys and they didn't have the Red Line, but they had a couple of gear oils in the same viscosity, the one I got was labeled as a synchro type oil. Put it in up to the level and the shifts are pretty smooth. Probably doesn't make as much difference as changing the tranny to a synthetic, but it does help.

03-19-2008, 09:09 AM	#7
Signal 2 Viable Fossil Join Date: Mar 2008 Location: Mid-West iTrader: (0) Posts: 199 Rep Power: 17	Liberally grease the ball pivot and lower bushing too.

03-19-2008, 11:04 PM	#9
FD3S2005 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 10 Rep Power: 0	i dont think i have any in my shifter last time i looked