info on Rx4 bellhousing

Whizbang · 11-03-2009, 07:23 PM

anyone know if an rx4 bellhousing and a later turbo bellhousing are similar enough to be interchangeable?

djmtsu · 11-03-2009, 08:12 PM

I was under the impression that all rotary endplate irons were the same (with maybe the exception of the 10A).

What matters is that you use the flywheel, clutch kit, trans and starter from the same 'generation'.

But I'm a noob.

Whizbang · 11-04-2009, 07:29 PM

well both the rx4 and turbo transmissions are supposedly "r" types which have removable bellhousings. I know the pattern to bolt to the engine is the same but i think the actual transmission flange patterns are the same. What im curious about is the length of the bell housings.

RotaryProphet · 11-04-2009, 08:05 PM

I've used both bolted to a T5 transmission adapter for my dyno, and as far as I know they're interchangeable, but it'd be worth a look at the clutch fork and hydraulics to make sure, as I didn't use any of that.

Black91n/a · 11-05-2009, 05:11 PM

I thought that the RX-4 bellhousing allowed you to use an NA clutch/flywheel setup with a turbo transmission. I may be wrong though.

Whizbang · 11-06-2009, 06:49 PM

im not concerned about which flywheel i have to use, i just want the T5 behind my 13b. Running a turbo flywheel is of no concern.

11-03-2009, 07:23 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	info on Rx4 bellhousing anyone know if an rx4 bellhousing and a later turbo bellhousing are similar enough to be interchangeable? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-03-2009, 08:12 PM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	I was under the impression that all rotary endplate irons were the same (with maybe the exception of the 10A). What matters is that you use the flywheel, clutch kit, trans and starter from the same 'generation'. But I'm a noob. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

11-04-2009, 07:29 PM	#3
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	well both the rx4 and turbo transmissions are supposedly "r" types which have removable bellhousings. I know the pattern to bolt to the engine is the same but i think the actual transmission flange patterns are the same. What im curious about is the length of the bell housings. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-06-2009, 06:49 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	im not concerned about which flywheel i have to use, i just want the T5 behind my 13b. Running a turbo flywheel is of no concern. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-04-2009, 08:05 PM	#4
RotaryProphet Rotary Fanatic Join Date: Sep 2008 iTrader: (0) Posts: 147 Rep Power: 17	I've used both bolted to a T5 transmission adapter for my dyno, and as far as I know they're interchangeable, but it'd be worth a look at the clutch fork and hydraulics to make sure, as I didn't use any of that.

11-05-2009, 05:11 PM	#5
Black91n/a Rotary Fan in Training Join Date: Mar 2009 iTrader: (0) Posts: 39 Rep Power: 0	I thought that the RX-4 bellhousing allowed you to use an NA clutch/flywheel setup with a turbo transmission. I may be wrong though.