September 2009 Car Of The Month

Whizbang · 10-03-2009, 08:16 AM

Questions to the owner:

Q: Congratulations for winning Ride of the Month! Tell us about how you acquired this car?

A: By pure accident. I was 18 and the trans in my DD Cherokee puked in the spring. I needed a car to drive while I repaired the Jeep. Thoughts were to buy a sports car cheap that needed some minor repairs, fix her up, enjoy for the summer, sell in the spring and never look back..... that was in 1997

Q: Favorite stretch of road to drive your car on (location)?

A: That would have to be Deals Gap. I plan on driving x-country at some point and I can't imagine a road beating The Tail of the Dragon

Q: Whats the biggest reason you chose a rotary powered car to modify?

A: I was intrigued with the rotary after the purchase and the handling on a bone stock FC was better than my fathers Porsche. Seemed like a great car to start with alot of potential

Q: What are the future plans on this car?

A: A very dear friend of mine and I are in the planning stages of opening up our own shop, this car will be the test mule for a bunch of products we would like to offer as well as a show/street/track car, basically a rolling advertisment Over the winter she's coming down to a bare shell to repair a little undercarriage cancer and herculiner, sound deadening in the interior, re-wire a few things, 6-spd trans, BBK's at both ends, underbelly pan and eventually a custom interior

Q: What was the worst and best memory of this project?

A: Tough call but it would have to be one of the 3 engines that let loose, none of which by my own foot, tuning or building. Best memory would have to be talking to all the fellow Rotorheads at DGRR about the project, the trophy was an awesome touch and I'm looking foward to going back in about 6 months.

Q: Any other hobbies besides cars?

A: Do women count?

Q: Anyone you'd like to thank?

A: My very dear friend and hopeful future business partner Alex for hanging in for a few of my many allnighters, Dave @ KDR, Simon @ MoTeC and as cheesy as it sounds, the rotary community as a whole for without a bunch of deals on parts, help when I needed it, she wouldn't be where she is.

Q: Anything in the pipeline for another ROTM win?

A: Actually..... We are doing a complete ground up rotisserie resto on Alex's S4 TII and she's also getting an LS1 swap, repaint and a ton of custom parts that we plan to offer, and I'm looking for an FD roller because I have a few things I'd like to try in that chassis as well as some product development as well.

Full specifications listing? (mods, etc)

Drivetrain:
Rebuilt and ported 13B-RE.
RX8 e-shaft and stat gears
Entire engine cryo treated
Everything has been portmatched and ceramic coated
13B-REW sequentials, custom y-pipe, x-over pipe, and Rob Bailey Solenoids
Custom Magnaflow exhaust
Custom HMIC with removeable frame
LOTS of ducting
Griffen Rad
Dual Mocal oil coolers
Exedy twin disc clutch
Type-R box (soon be GONE!)
Torsen pumkin, 4.11 gears
Custom Marren fuel rails with 750/1000cc injectors and FPD
Cosmo Pump (thanks for getting me home from DGRR Brian @ RotorSports!)
Aeromotive Fuel Filter and Mini-Reg
MoTeC M820 ECU, custom harness will Mil-Spec firewall connectors

Brakes
KVR drilled rotors and pads
SS brake lines

Running gear
BBS RYII 17x8 +35 and 17x9 +35 wrapped in 235/40 and 255/40/17 Azenis RT615 for the street
Work VSII 17x8 +35 and 17x9 +35 wrapped in 235/40 and 255/40/17 Toyo Proxes RA1's for the track

Interior:
S5 black dash
New ACC carpet sets
Modded Kirk Racing "cage," now just a roll bar
Simpson 5-point harnesses
Corbeau seats,
Custom fiberglass door panels
Custom switch panel
Spal one touch window switches
Relocated battery
Custom rear stereo box
Alpine head unit, GPS, remote battery disconnect,
Refinished all the interior pieces
Custom 3 gauge idiot light pod
AIM Strada digital Dash

Exterior:
Custom paint based off of Lotus Storm Titanium Mettalic
Relocated front chassis harness to a rather hidden location
Shine Auto front bumper
S5 moldings
Hella 90MM projector headlights
10th AE style tails
Custom drop vented hood with Aerocatch latches and SS hood supports.

For more photos and video, check out the TitaniumTT's Rotary Rides page. CLICK HERE

***ZGN*** · 10-03-2009, 09:27 AM

Congratulations!

RotorDad · 10-03-2009, 10:50 AM

CONGRATS

Turbo II · 10-04-2009, 06:31 PM

Congrats man!

***TitaniumTT*** · 10-04-2009, 11:13 PM

Thanks Guys! I really appreciate it, there was some damn stiff competition this month.

RotaryRoadRage · 10-05-2009, 10:22 AM

Congrat's brian !

10-03-2009, 08:16 AM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	September 2009 Car Of The Month - TitaniumTT's FC3S Turbo Questions to the owner: Q: Congratulations for winning Ride of the Month! Tell us about how you acquired this car? A: By pure accident. I was 18 and the trans in my DD Cherokee puked in the spring. I needed a car to drive while I repaired the Jeep. Thoughts were to buy a sports car cheap that needed some minor repairs, fix her up, enjoy for the summer, sell in the spring and never look back..... that was in 1997 Q: Favorite stretch of road to drive your car on (location)? A: That would have to be Deals Gap. I plan on driving x-country at some point and I can't imagine a road beating The Tail of the Dragon Q: Whats the biggest reason you chose a rotary powered car to modify? A: I was intrigued with the rotary after the purchase and the handling on a bone stock FC was better than my fathers Porsche. Seemed like a great car to start with alot of potential Q: What are the future plans on this car? A: A very dear friend of mine and I are in the planning stages of opening up our own shop, this car will be the test mule for a bunch of products we would like to offer as well as a show/street/track car, basically a rolling advertisment Over the winter she's coming down to a bare shell to repair a little undercarriage cancer and herculiner, sound deadening in the interior, re-wire a few things, 6-spd trans, BBK's at both ends, underbelly pan and eventually a custom interior Q: What was the worst and best memory of this project? A: Tough call but it would have to be one of the 3 engines that let loose, none of which by my own foot, tuning or building. Best memory would have to be talking to all the fellow Rotorheads at DGRR about the project, the trophy was an awesome touch and I'm looking foward to going back in about 6 months. Q: Any other hobbies besides cars? A: Do women count? Q: Anyone you'd like to thank? A: My very dear friend and hopeful future business partner Alex for hanging in for a few of my many allnighters, Dave @ KDR, Simon @ MoTeC and as cheesy as it sounds, the rotary community as a whole for without a bunch of deals on parts, help when I needed it, she wouldn't be where she is. Q: Anything in the pipeline for another ROTM win? A: Actually..... We are doing a complete ground up rotisserie resto on Alex's S4 TII and she's also getting an LS1 swap, repaint and a ton of custom parts that we plan to offer, and I'm looking for an FD roller because I have a few things I'd like to try in that chassis as well as some product development as well. Full specifications listing? (mods, etc) Drivetrain: Rebuilt and ported 13B-RE. RX8 e-shaft and stat gears Entire engine cryo treated Everything has been portmatched and ceramic coated 13B-REW sequentials, custom y-pipe, x-over pipe, and Rob Bailey Solenoids Custom Magnaflow exhaust Custom HMIC with removeable frame LOTS of ducting Griffen Rad Dual Mocal oil coolers Exedy twin disc clutch Type-R box (soon be GONE!) Torsen pumkin, 4.11 gears Custom Marren fuel rails with 750/1000cc injectors and FPD Cosmo Pump (thanks for getting me home from DGRR Brian @ RotorSports!) Aeromotive Fuel Filter and Mini-Reg MoTeC M820 ECU, custom harness will Mil-Spec firewall connectors Brakes KVR drilled rotors and pads SS brake lines Running gear BBS RYII 17x8 +35 and 17x9 +35 wrapped in 235/40 and 255/40/17 Azenis RT615 for the street Work VSII 17x8 +35 and 17x9 +35 wrapped in 235/40 and 255/40/17 Toyo Proxes RA1's for the track Interior: S5 black dash New ACC carpet sets Modded Kirk Racing "cage," now just a roll bar Simpson 5-point harnesses Corbeau seats, Custom fiberglass door panels Custom switch panel Spal one touch window switches Relocated battery Custom rear stereo box Alpine head unit, GPS, remote battery disconnect, Refinished all the interior pieces Custom 3 gauge idiot light pod AIM Strada digital Dash Exterior: Custom paint based off of Lotus Storm Titanium Mettalic Relocated front chassis harness to a rather hidden location Shine Auto front bumper S5 moldings Hella 90MM projector headlights 10th AE style tails Custom drop vented hood with Aerocatch latches and SS hood supports. For more photos and video, check out the TitaniumTT's Rotary Rides page. CLICK HERE __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook Last edited by ZGN; 10-03-2009 at 09:26 AM.. Reason: added photo

10-03-2009, 09:27 AM	#2
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	Congratulations! __________________ Kevin

10-03-2009, 10:50 AM	#3
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va iTrader: (1) Posts: 591 Rep Power: 16	CONGRATS __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

10-04-2009, 06:31 PM	#4
Turbo II Zoom Freaking Zoom Join Date: Mar 2008 Location: NC iTrader: (0) Posts: 324 Rep Power: 17	Congrats man! __________________ 1988 RX-7 Convertible 1991 RX-7 Turbo 2004 RX-8 GT 1985 RX-7 GSL - Sold

10-04-2009, 11:13 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Thanks Guys! I really appreciate it, there was some damn stiff competition this month. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-05-2009, 10:22 AM	#6
RotaryRoadRage Rotary Fanatic Join Date: Jun 2008 iTrader: (3) Posts: 244 Rep Power: 17	Congrat's brian ! __________________ 89 TII black on black Gamer tag - graveconditions

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode