20B: What ECU's are you running?

eyecandy · 06-14-2009, 09:41 PM

I am looking to acquire a 20B, and I am curious as to what ECU you guys are using, and why you chose it, and if you could post up alittle detail on your setup.

War Eagle · 06-15-2009, 07:07 AM

I am running the Microtech LTX-12S. Stage two street ported engine, 3mm RA Superseals, Carlos Lopez balanced rotating assembly, Xtreme Rotories stud kit, Precision Dynamics T78 BB turbo, and a bunch of other stuff I certainly have forgotten.

At one point I had a Wolf 3D and then a Haltech installed. Bottom line, they all worked but go with whatever your tuner recommends. In my case, Jesus Padilla is most familiar with Microtechs so this is the route I went. Car runs extremely well on it but it did also on all the other units too. Motech will also work but it is pricey as well as Pectel but it has little support. My money would be on either Microtech or Haltech.

06-14-2009, 09:41 PM	#1
eyecandy Rotary Fan in Training Join Date: Mar 2008 iTrader: (1) Posts: 89 Rep Power: 17	20B: What ECU's are you running? I am looking to acquire a 20B, and I am curious as to what ECU you guys are using, and why you chose it, and if you could post up alittle detail on your setup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-15-2009, 07:07 AM	#2
War Eagle Rotary Fanatic Join Date: Apr 2008 iTrader: (0) Posts: 240 Rep Power: 17	I am running the Microtech LTX-12S. Stage two street ported engine, 3mm RA Superseals, Carlos Lopez balanced rotating assembly, Xtreme Rotories stud kit, Precision Dynamics T78 BB turbo, and a bunch of other stuff I certainly have forgotten. At one point I had a Wolf 3D and then a Haltech installed. Bottom line, they all worked but go with whatever your tuner recommends. In my case, Jesus Padilla is most familiar with Microtechs so this is the route I went. Car runs extremely well on it but it did also on all the other units too. Motech will also work but it is pricey as well as Pectel but it has little support. My money would be on either Microtech or Haltech.