which grommet or air bleed to use???

Fidelity101 · 05-10-2009, 06:46 PM

I have an S5 motor in an S4 car using the S4 electronics and all that boring jazz, so I still use my S4 injectors but I am using S5 rails. so I ordered s5 grommets for my injectors since they were going to be on an S5 block/manifold with s5 rails.

on mazdatrix's website they have the grommets listed as

84-92 All Upper Grommet 13-2520-8574
84-88 All Lower Grommet 13-2570-N326
89-92 All Lower Grommet 13-2570-N350

so I have the right upper grommet but I ordered the bolded grommet for the lower

I have a terrible vacuum leak coming from the primary injectors and the air bleeds are in there.

The 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom)

so do I need to put S4 air bleeds in there or did I buy the wrong grommet?

help

Atkins Dan · 05-11-2009, 03:32 PM

I would order the cheeper part # as the 13-2570-N326 & 13-2570-N326 is the same part just has a different#..

I have used both part #'s with no problem..

Dan

Fidelity101 · 05-13-2009, 05:04 PM

okay I've used both lower injector grommets from both the N326 and N350 and its still leaking, but now I think its leaking from where I plugged the primary oil injectors, do you use loctite or RTV with the threaded plug? I have the banzai block off kit on it currently.

Fidelity101 · 05-13-2009, 07:29 PM

ive tried both and they still leak, I even used some RTV and red thread locker on the OMP plugs and it still leaks!!!! now my LIM to dynamic chamber gasket is ruined and I have to wait till I can I get a new one from the dealer (which they will probably have to order ) to try again. this time I put some RTV around the lower grommets to hope that it wont leak anymore!

FML

05-10-2009, 06:46 PM	#1
Fidelity101 Reliable Source Join Date: Nov 2008 Location: Michigan/Illinois iTrader: (1) Posts: 336 Rep Power: 17	which grommet or air bleed to use??? I have an S5 motor in an S4 car using the S4 electronics and all that boring jazz, so I still use my S4 injectors but I am using S5 rails. so I ordered s5 grommets for my injectors since they were going to be on an S5 block/manifold with s5 rails. on mazdatrix's website they have the grommets listed as 84-92 All Upper Grommet 13-2520-8574 84-88 All Lower Grommet 13-2570-N326 89-92 All Lower Grommet 13-2570-N350 so I have the right upper grommet but I ordered the bolded grommet for the lower I have a terrible vacuum leak coming from the primary injectors and the air bleeds are in there. The 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom) so do I need to put S4 air bleeds in there or did I buy the wrong grommet? help __________________ My Rx-7 Vids

05-11-2009, 03:32 PM	#2
Atkins Dan Premium Vendor Join Date: Feb 2008 iTrader: (6) Posts: 265 Rep Power: 17	I would order the cheeper part # as the 13-2570-N326 & 13-2570-N326 is the same part just has a different#.. I have used both part #'s with no problem.. Dan __________________ 82 SuperCharged rx-7 {my toy not the daily driver anymore now under restoration} 88 B2200 rotary powered with a 7inch Camden SuperCharger !RIP! Jan/4/2007 2001 626 5-speed 80k on the clock all stock {Truck replacement} 2005 MAZDA6 V6 WAGON now that is a pimping ride all stock for the moment.. Paid off WWW.AtkinsRotary.com

05-13-2009, 05:04 PM	#3
Fidelity101 Reliable Source Join Date: Nov 2008 Location: Michigan/Illinois iTrader: (1) Posts: 336 Rep Power: 17	okay I've used both lower injector grommets from both the N326 and N350 and its still leaking, but now I think its leaking from where I plugged the primary oil injectors, do you use loctite or RTV with the threaded plug? I have the banzai block off kit on it currently. __________________ My Rx-7 Vids

05-13-2009, 07:29 PM	#4
Fidelity101 Reliable Source Join Date: Nov 2008 Location: Michigan/Illinois iTrader: (1) Posts: 336 Rep Power: 17	ive tried both and they still leak, I even used some RTV and red thread locker on the OMP plugs and it still leaks!!!! now my LIM to dynamic chamber gasket is ruined and I have to wait till I can I get a new one from the dealer (which they will probably have to order ) to try again. this time I put some RTV around the lower grommets to hope that it wont leak anymore! FML __________________ My Rx-7 Vids

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode