20B shaft puller

charlies7 · 05-04-2009, 11:43 AM

Hey guys,

I was curious to know if anyone had the special tool that seperated the 20b shaft when disassembling the engine or knew of a way that worked without having the tool necessary for the job. I cant see myself spending 1400 bucks for the tool. I know that scalliwag use to make them on the other forum but I dont know if he does anymore.

Does anyone have a solid idea or possibly loan me theres for a week?

-Charlie

sm0keyii · 05-05-2009, 05:23 PM

I dunno if he still does. I'm crying on the inside because I manned up to buy the tool and Mazdatrix said I have to wait a teeny bit, because it's special ordered =( I'm interested in learning any technique as well before I use this tool. But I found an awesome youtube video you can watch that will help. I think what they are using is a custom made tool though. I let you know how it goes once I get the tool. Here's a link to RE Amemiya tearing down down 20B. http://www.youtube.com/watch?v=gcrVxI0Rk-w Shaft seperation seen at 5:34

charlies7 · 05-05-2009, 06:14 PM

Thats a sweet video, thanks for the link..

Jeff20B · 05-06-2009, 01:04 PM

That's a wonderful video. Thank you.

sm0keyii · 05-06-2009, 04:49 PM

Quote:

Originally Posted by RotaryResurrection

Here's what I made...a cut up and modified rear stationary gear (13b) and a modified front hub bolt...took me about 3 hours to improvise the first time I needed to take a 20b apart. Worked fine for both engines I've disassembled. Once it's in place and bolted to the rotor journal you are seperating, you put a large 3 jaw gear puller on it and it pulls right off. No special technique required, takes about 5 minutes.

That is a far simplier looking tool than I have seen others fab. Others I have seen look more like the OEM tool. A simplier tool that does that job right is even better, mucho props

I wish I had the tools to do something like that. I only chose my route because I'm such a damn Mazda nut, but now I'm broke as hell

I'll post pics of the tool when I get it.

sm0keyii · 09-17-2009, 08:11 PM

*bump* I finally got my tool after 4 months of waiting. I guess they had to build it from scratch? lmao. Pics of it will be loaded tonight.

To_Slow · 09-18-2009, 07:20 AM

Nice .... Put it to good use....

***Herblenny*** · 09-18-2009, 08:06 AM

So, where did you order it from?? And how much?

sm0keyii · 09-18-2009, 09:20 PM

It came from Mazda, ordered through Mazdatrix. Price, it was quite a bit. Here's a link. http://www.mazdatrix.com/getprice.as...m=49-J011-1A00 I hope to put it to good use after my 4 month tdy coming up. Hopefully I manage to save enough for a rebuild kit and after teardown trade my my rotors for some NA. Such a long road ahead. After this is all done then a relationship will seem managable, unless she is rich ^_^

05-04-2009, 11:43 AM	#1
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago iTrader: (2) Posts: 319 Rep Power: 17	20B shaft puller - removing technique Hey guys, I was curious to know if anyone had the special tool that seperated the 20b shaft when disassembling the engine or knew of a way that worked without having the tool necessary for the job. I cant see myself spending 1400 bucks for the tool. I know that scalliwag use to make them on the other forum but I dont know if he does anymore. Does anyone have a solid idea or possibly loan me theres for a week? -Charlie

05-05-2009, 05:23 PM	#2
sm0keyii Rotary Fan in Training Join Date: Mar 2008 iTrader: (2) Posts: 39 Rep Power: 0	I dunno if he still does. I'm crying on the inside because I manned up to buy the tool and Mazdatrix said I have to wait a teeny bit, because it's special ordered =( I'm interested in learning any technique as well before I use this tool. But I found an awesome youtube video you can watch that will help. I think what they are using is a custom made tool though. I let you know how it goes once I get the tool. Here's a link to RE Amemiya tearing down down 20B. http://www.youtube.com/watch?v=gcrVxI0Rk-w Shaft seperation seen at 5:34 Last edited by sm0keyii; 05-05-2009 at 05:27 PM..

09-17-2009, 08:11 PM	#6
sm0keyii Rotary Fan in Training Join Date: Mar 2008 iTrader: (2) Posts: 39 Rep Power: 0	bump I finally got my tool after 4 months of waiting. I guess they had to build it from scratch? lmao. Pics of it will be loaded tonight. Last edited by sm0keyii; 09-17-2009 at 09:09 PM.. Reason: pics

09-18-2009, 07:20 AM	#7
To_Slow Rotary Fanatic Join Date: Feb 2008 Location: Shelby Twp MI. iTrader: (1) Posts: 315 Rep Power: 17	Nice .... Put it to good use.... __________________ My link

09-18-2009, 08:06 AM	#8
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	So, where did you order it from?? And how much? __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

05-05-2009, 06:14 PM	#3
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago iTrader: (2) Posts: 319 Rep Power: 17	Thats a sweet video, thanks for the link..

05-06-2009, 01:04 PM	#4
Jeff20B Rotary Fanatic Join Date: Mar 2008 iTrader: (1) Posts: 215 Rep Power: 17	That's a wonderful video. Thank you.

09-18-2009, 09:20 PM	#9
sm0keyii Rotary Fan in Training Join Date: Mar 2008 iTrader: (2) Posts: 39 Rep Power: 0	It came from Mazda, ordered through Mazdatrix. Price, it was quite a bit. Here's a link. http://www.mazdatrix.com/getprice.as...m=49-J011-1A00 I hope to put it to good use after my 4 month tdy coming up. Hopefully I manage to save enough for a rebuild kit and after teardown trade my my rotors for some NA. Such a long road ahead. After this is all done then a relationship will seem managable, unless she is rich ^_^ Last edited by sm0keyii; 09-18-2009 at 09:28 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode