My new FC

need RX7 · 04-19-2009, 12:55 AM

Bought this car from nonturdbo in Texarkana, Texas. I was in desperate need for a car with a cleaner body and this one was definitely worth the drive.

The car is a 1986 base model with a solid as hell unibody. It has 82k miles and doesn't run due to electrical issues. The engine is fine and makes good compression, it just won't start. Hopefully I'll have it figured out soon (I have a few ideas floating around in my head). I got it close to starting a few times today, but no dice.

^somewhere in Illinois

zomg! I has rockers and quarters now!! :P

twins

I'll get a few more pics after I wash it tomorrow.

RETed · 04-19-2009, 04:47 AM

Glad to see you could go get it...
It's a good buy, especially since it's a hard top with no sunroof!
If I was closer, I would've picked it up in a heartbeat...

-Ted

Boostmaniac · 04-19-2009, 06:48 AM

Do I smell a turbo swap in the future?

Looks super clean man, I hope you can feel my envy.

NoDOHC · 04-19-2009, 08:20 AM

Congrats!

You will want to swap the hubs and brakes from the GXL, the SE's have poor brakes.

Your issue may be as simple as a vacuum line, try starting the car and floor the gas. If it runs at like 5,000 and misses and carries on, chances are it is a big vaccum leak.

josh18_2k · 04-19-2009, 08:26 AM

no bins/seats- wtf?
ps: hardtop ftw!

need RX7 · 04-19-2009, 01:23 PM

Hehe, the no-sunroof part was a big factor in the decision making process for this car

. And yeah, the 5-lug swap is next on the list after I get it running. And a TII swap is also in the future, after I get it to semi-restored status.

I plan on keeping this car for a long time, so I want to fix all the stuff that makes it feel like an old car. Such as, inner shifter bushings, door and hatch seals, suspension bushings, etc. Once that is done, I want to get some coilovers and some 17" BB$ R$s. I also want to fix the dings/dents/imperfections on the body and have it resprayed in the stock color (my uncle paints cars, so hopefully I'll get a good deal on this)

My goal is to basically have a really nice old car, that people will stop and look at and say 'Wow, this is very nice for it's age

Then shit bricks once they look under the hood (I plan on going all-out in the future, half-bridge, GT35R, etc)

Phoenix7 · 04-19-2009, 02:27 PM

so, will you want to change your name to GOTSRX7?

congrats on the purchase....I've never seen a binless FC.

Rx-7fetish · 04-19-2009, 07:28 PM

Quote:

Originally Posted by Phoenix7

I've never seen a binless FC.

My 86 sport coupe came without bins, i thought bins were a rare option when i first got it and didnt know much about them.

Rotary#10 · 04-19-2009, 09:30 PM

without bins seems impractical... but hey thats the way it came.. then thats the way it came.

Shadow24v · 04-20-2009, 07:56 AM

nice buy

I hope you discinnected the driveshaft when you towed the car like that.... i towed mine on a dolly as well but i put the rear wheels on the dolly so i didn't have to disconnect the driveshaft

The 87 FC i just picked up also doesn't have bins either

Good luck with the car, im in the same boat, have to figure out why it won't run lol

need RX7 · 04-20-2009, 02:11 PM

Quote:

Originally Posted by Shadow24v

I hope you discinnected the driveshaft when you towed the car like that....

Ha, actually I didn't. We tried getting it off in Texas, but it was on there really tight (seemed like we'd need air tools to get it off) and there was no room for a breaker bar under there. Plus there was this gnarly-ass spider right above my head when I was under there, so I was like 'fuck it'. I figure if the trans goes out, I could either swap in my old one or buy a new one for candy and change.

need RX7 · 04-20-2009, 08:19 PM

Well, I did a comp test earlier, and I have 30 psi in the front rotor and 0 in the rear.

I guess I should have seen it coming, I was kind of pushing my luck thinking I'd be able to get an 82k mile rust free chassis with a good motor for $500. Anyone selling a rebuild kit and possibly some housings for less that retail?

I hate to perpetuate the stereotype of a 'broke, cheap-ass FC owner' but I'm pretty much boned for a while.

I guess it's kind of a blessing in disguise, since the engine bay is really dirty, and having the motor out will give me a chance to clean it out really nice. I don't really want to swap in my other motor, since it has 202k miles already.

need RX7 · 05-21-2009, 07:25 PM

So I may have found a TII motor, trans and ECU locally for $550. The guy says he bought it for $1300 to use in a kit car, realized it didn't fit and wants to get rid of it now. I know it's kind of risky to buy a motore without seeing the results of a compression test, but I figure if it turns out to be blown, I coulc make most of the money back. The TII trans would be worth at lewast $200, maybe $75-100 for the ECU, a couple hundred for the good rotor and housing, the irons, various external parts, etc.

And if it's not blown, it's a good-ass deal for a turbo motor and trans

Hopefully I'll be able to come up with the rest of the money before someone else nicks it (I hate being a typical broke FC owner

)

Phoenix7 · 05-21-2009, 07:29 PM

good deal, get it. Like you said, if it's low comp then sell the good parts and at least break even.

need RX7 · 05-22-2009, 02:10 PM

FFFFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUU-

Someone else got to it first

04-19-2009, 08:20 AM	#4
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	Congrats! You will want to swap the hubs and brakes from the GXL, the SE's have poor brakes. Your issue may be as simple as a vacuum line, try starting the car and floor the gas. If it runs at like 5,000 and misses and carries on, chances are it is a big vaccum leak. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

04-19-2009, 08:26 AM	#5
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR iTrader: (0) Posts: 473 Rep Power: 17	no bins/seats- wtf? ps: hardtop ftw! __________________

04-19-2009, 01:23 PM	#6
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	Hehe, the no-sunroof part was a big factor in the decision making process for this car . And yeah, the 5-lug swap is next on the list after I get it running. And a TII swap is also in the future, after I get it to semi-restored status. I plan on keeping this car for a long time, so I want to fix all the stuff that makes it feel like an old car. Such as, inner shifter bushings, door and hatch seals, suspension bushings, etc. Once that is done, I want to get some coilovers and some 17" BB$ R$s. I also want to fix the dings/dents/imperfections on the body and have it resprayed in the stock color (my uncle paints cars, so hopefully I'll get a good deal on this) My goal is to basically have a really nice old car, that people will stop and look at and say 'Wow, this is very nice for it's age Then shit bricks once they look under the hood (I plan on going all-out in the future, half-bridge, GT35R, etc) __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

04-19-2009, 09:30 PM	#9
Rotary#10 Rotorhead Join Date: Sep 2008 Location: "the town " Oakland iTrader: (1) Posts: 219 Rep Power: 17	without bins seems impractical... but hey thats the way it came.. then thats the way it came. __________________ Currently running: 90 GTUs converted to S5 TurboII. Track car. 90 N/A GTUs.. Running project car 89 N/A GTUs in Black #2 10/6/18 Blown coolant seal undergoing rebuild and restomod.

04-20-2009, 08:19 PM	#12
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	Well, I did a comp test earlier, and I have 30 psi in the front rotor and 0 in the rear. I guess I should have seen it coming, I was kind of pushing my luck thinking I'd be able to get an 82k mile rust free chassis with a good motor for $500. Anyone selling a rebuild kit and possibly some housings for less that retail? I hate to perpetuate the stereotype of a 'broke, cheap-ass FC owner' but I'm pretty much boned for a while. I guess it's kind of a blessing in disguise, since the engine bay is really dirty, and having the motor out will give me a chance to clean it out really nice. I don't really want to swap in my other motor, since it has 202k miles already. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

04-19-2009, 12:55 AM	#1
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	My new FC Bought this car from nonturdbo in Texarkana, Texas. I was in desperate need for a car with a cleaner body and this one was definitely worth the drive. The car is a 1986 base model with a solid as hell unibody. It has 82k miles and doesn't run due to electrical issues. The engine is fine and makes good compression, it just won't start. Hopefully I'll have it figured out soon (I have a few ideas floating around in my head). I got it close to starting a few times today, but no dice. ^somewhere in Illinois zomg! I has rockers and quarters now!! :P twins I'll get a few more pics after I wash it tomorrow. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress. Last edited by need RX7; 04-19-2009 at 12:58 AM..

04-19-2009, 06:48 AM	#3
Boostmaniac Rotary Fanatic Join Date: Apr 2008 iTrader: (0) Posts: 182 Rep Power: 0	Do I smell a turbo swap in the future? Looks super clean man, I hope you can feel my envy.

04-20-2009, 07:56 AM	#10
Shadow24v Rotary Fan in Training Join Date: Feb 2009 iTrader: (0) Posts: 69 Rep Power: 16	nice buy I hope you discinnected the driveshaft when you towed the car like that.... i towed mine on a dolly as well but i put the rear wheels on the dolly so i didn't have to disconnect the driveshaft The 87 FC i just picked up also doesn't have bins either Good luck with the car, im in the same boat, have to figure out why it won't run lol

05-21-2009, 07:25 PM	#13
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	So I may have found a TII motor, trans and ECU locally for $550. The guy says he bought it for $1300 to use in a kit car, realized it didn't fit and wants to get rid of it now. I know it's kind of risky to buy a motore without seeing the results of a compression test, but I figure if it turns out to be blown, I coulc make most of the money back. The TII trans would be worth at lewast $200, maybe $75-100 for the ECU, a couple hundred for the good rotor and housing, the irons, various external parts, etc. And if it's not blown, it's a good-ass deal for a turbo motor and trans Hopefully I'll be able to come up with the rest of the money before someone else nicks it (I hate being a typical broke FC owner ) __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

05-22-2009, 02:10 PM	#15
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI iTrader: (0) Posts: 485 Rep Power: 17	FFFFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UUUUUUU- Someone else got to it first __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode