got my front clip today

sen2two · 02-26-2009, 07:37 PM

i got my front clip today. pretty sick opening a box and theres half a car there...lol

but it cam with some goodies. the best thing by far is the one piece Cusco struts with camber plates. but i need the matching rears...where could i get just the rears? what about mixing a different brand for the rear???

it also came with this HKS thing. im thinking its a fuel cut defender...but im not really sure. anyone know for sure what this is???

anyone heard of this company IMOLA? looks like a cool wheel, i'll use it. i might get it re-wrapped though.

then some strut bars and some other things...front clips are the shit. you always get suprises. but it sucks when you only get half a suspension. how the hell would i find the matching rear?

WE3RX7 · 02-26-2009, 08:05 PM

Whats the clip for? RHD conversion?

Check the backside of the steering wheel, you might find its made by sparco, etc as a lot of JDM companies buy italian steering wheels and rebrand them...

staticpat · 02-26-2009, 08:07 PM

The HKS thing looks like a boost pressure sender for an electronic HKS boost gauge.

sen2two · 02-26-2009, 08:27 PM

i checked the wheel, no other markings anywhere. i also found that the stock ECU isnt so stock. its re-tuned by pan-speed. i know i've seen these things on ebay, but this is actually tuned for this specific motor and set-up. pretty cool...

you might be right there staticpat, cause thats where the stock pressure sensor would sit.

fc nut · 02-26-2009, 11:01 PM

where did you get the clip and how much?

sen2two · 02-27-2009, 02:07 AM

tigerautoparts.com

2254.00 shipped to my door. wich i thought was a great deal...

WE3RX7 · 02-27-2009, 11:19 AM

Lol ^ I'm still curious what the clip was for? Did you need a used engine, RHD conversion, etc?

sen2two · 02-27-2009, 06:13 PM

everything...

jerd_hambone · 02-27-2009, 08:46 PM

Why not have half a RHD TII sitting around?

You can get in it and pretend you are in Initial D and in a mad tight JDM car!

Just messing around. Lots of people seem to get goodies along with front clips

sen2two · 02-27-2009, 09:36 PM

when i first got it, i crouched down behind the wheel and pretended to drive it...lol

im still hoping i have a nice clutch/flywheel in there. i havnt checked yet...

Max777 · 02-28-2009, 12:01 AM

Why dont you try to contact cusco's U.S. distributors about the suspension? This might also be a good chance to get the ones you have reconditioned.

However, if doing that costs more than $1500, dont bother and just get Stance GR+ coilovers.

anyway, congrads on the clip! I might have to do this myself because a complete used T2 engine can cost around that much easy!

Flooder · 02-28-2009, 03:26 PM

I can get stances for a decent price. Well under $1500. I just sold a set for an S13 for like $1200 shipped. I can get an even better price on ksport or D2.

Max777 · 03-01-2009, 03:03 PM

Oh yeah? That's cool man, all the people I know running stance love them.

Flooder · 03-02-2009, 07:45 PM

$1145 shipped for Stance GR+ coilovers for the FC anywhere in the continental US.

TehMonkay · 03-03-2009, 01:43 PM

Quote:

Originally Posted by Flooder

$1145 shipped for Stance GR+ coilovers for the FC anywhere in the continental US.

Damn, i need to remember this when it is time to order.

02-26-2009, 07:37 PM	#1
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	got my front clip today i got my front clip today. pretty sick opening a box and theres half a car there...lol but it cam with some goodies. the best thing by far is the one piece Cusco struts with camber plates. but i need the matching rears...where could i get just the rears? what about mixing a different brand for the rear??? it also came with this HKS thing. im thinking its a fuel cut defender...but im not really sure. anyone know for sure what this is??? anyone heard of this company IMOLA? looks like a cool wheel, i'll use it. i might get it re-wrapped though. then some strut bars and some other things...front clips are the shit. you always get suprises. but it sucks when you only get half a suspension. how the hell would i find the matching rear? __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

02-26-2009, 08:07 PM	#3
staticpat Rally Fanboy Join Date: Feb 2008 Location: New York iTrader: (1) Posts: 147 Rep Power: 18	The HKS thing looks like a boost pressure sender for an electronic HKS boost gauge. __________________

02-26-2009, 08:27 PM	#4
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	i checked the wheel, no other markings anywhere. i also found that the stock ECU isnt so stock. its re-tuned by pan-speed. i know i've seen these things on ebay, but this is actually tuned for this specific motor and set-up. pretty cool... you might be right there staticpat, cause thats where the stock pressure sensor would sit. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

02-26-2009, 11:01 PM	#5
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio iTrader: (0) Posts: 282 Rep Power: 17	where did you get the clip and how much? __________________ leaving my carbon footprint....one start up at a time

02-27-2009, 02:07 AM	#6
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	tigerautoparts.com 2254.00 shipped to my door. wich i thought was a great deal... __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

02-26-2009, 08:05 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Whats the clip for? RHD conversion? Check the backside of the steering wheel, you might find its made by sparco, etc as a lot of JDM companies buy italian steering wheels and rebrand them...

02-27-2009, 11:19 AM	#7
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA iTrader: (1) Posts: 1,812 Rep Power: 18	Lol ^ I'm still curious what the clip was for? Did you need a used engine, RHD conversion, etc?

02-27-2009, 06:13 PM	#8
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	everything... __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

02-27-2009, 09:36 PM	#10
sen2two KTEC Join Date: Jan 2009 iTrader: (2) Posts: 642 Rep Power: 0	when i first got it, i crouched down behind the wheel and pretended to drive it...lol im still hoping i have a nice clutch/flywheel in there. i havnt checked yet... __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

02-28-2009, 12:01 AM	#11
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Why dont you try to contact cusco's U.S. distributors about the suspension? This might also be a good chance to get the ones you have reconditioned. However, if doing that costs more than $1500, dont bother and just get Stance GR+ coilovers. anyway, congrads on the clip! I might have to do this myself because a complete used T2 engine can cost around that much easy! __________________ Rotaries:They are NOT that complicated!

02-28-2009, 03:26 PM	#12
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	I can get stances for a decent price. Well under $1500. I just sold a set for an S13 for like $1200 shipped. I can get an even better price on ksport or D2. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

03-01-2009, 03:03 PM	#13
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	Oh yeah? That's cool man, all the people I know running stance love them. __________________ Rotaries:They are NOT that complicated!

03-02-2009, 07:45 PM	#14
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona iTrader: (0) Posts: 321 Rep Power: 17	$1145 shipped for Stance GR+ coilovers for the FC anywhere in the continental US. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode