|
Old School Rotary (Pre-1979) Pre-1979 Discussion including performance modifications and technical support sections |
|
Thread Tools | Display Modes |
|
02-10-2009, 03:15 PM | #1 |
Respecognize!
|
The R100 / Familia Info Thread
Base specifications of the R100 / Familia
The best way to look at this is from a year to year perspective. All of the engine related technical information is in regards to a rotary powered vehicle unless otherwise noted. 1968 General info here Specifications Wheelbase: 89 inches Length: 150.8 inches Width: 58.3 inches Height: 53 inches Ride Height: ???? inches Track: Front 47.2 / Rear 46.9 Curb Weight: 2,013 lbs 16 - 24 Mpg 13.2 Gallon Gas Tank *The engine was carbureted with a 4 barrel Hitachi, 10A four port engine with a 9.4:1 compression ratio. Rated at 100 HP @ 7000 and 92 ft/lbs @ 4000. *There were two transmissions available; a four speed manual and ????????? . Manual gearing was as follows?????????????: 1st: 3.674 2nd: 2.217 3rd: 1.432 4th: 1.000
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook Last edited by Whizbang; 02-12-2009 at 11:32 PM.. |
02-11-2009, 08:43 PM | #2 |
Rotary Nut Case
|
Placeholder
if anyone has ideas for these threads please PM the info to either one of us so that we can add/edit the info thread and keep the thread as uncongested as possible Thank you |
11-01-2012, 01:35 AM | #3 |
The Newbie
|
(Wanted ad delete.)
[I see that you're basically spamming this forum looking for a vehicle to purchase. There are appropriate sections for this, and spamming the rest of the forum is frowned upon. I've edited this reply just to keep this thread clean and on topic. By RETed] Last edited by RETed; 11-01-2012 at 01:48 AM.. Reason: Delete unnecessary reply. |