Caster/Camber kit

P71 · 02-04-2009, 08:42 PM

Billy,
I'm doing some suspension work on my 83 GSL for this autocross season and I'm interested in your C/C kit. Is this something I'll be able to install on my own or am I going to need cutting /welding? Compatible with Tokico HP (non-adjustable) and RB springs? Running 14" LE meshies with 195 Azenis, so rubbing shouldn't be a problem.

Any kind of RCC special or groupbuy?

Kentetsu · 02-04-2009, 09:47 PM

Michael

I installed Billy's camber plates year before last. Very simple job. Just keep in mind that with stock sized springs you will be limited in movement, which will restrict how much camber you can get out of them. I got enough adjustment to make a very noticeable difference when I was running RB springs, but once I moved up to coilovers (smaller diameter springs) I had all the adjustment I could ever need. For autocross, I'm running probably about 75% of the camber available to me. But don't feel like you need to wait until you have coilovers to add the camber plates, they're still well worth it when used in conjunction with stock sized springs. Excellent quality part too (of course).

.

02-04-2009, 08:42 PM	#1
P71 RCC Contributor Join Date: Feb 2008 Location: WA State iTrader: (1) Posts: 651 Rep Power: 17	Caster/Camber kit Billy, I'm doing some suspension work on my 83 GSL for this autocross season and I'm interested in your C/C kit. Is this something I'll be able to install on my own or am I going to need cutting /welding? Compatible with Tokico HP (non-adjustable) and RB springs? Running 14" LE meshies with 195 Azenis, so rubbing shouldn't be a problem. Any kind of RCC special or groupbuy? __________________ Michael Pinto 2008 PDXCGP Drag Racing Season Champion 83 RX-7 GSL; 12A/5-Speed, Red/Red; 100% Stock - 16.072@83.39 01 CV Police Interceptor; 4.6 SOHC V8/4R70W, Dk Blue/Grey; K&N FIPK/RP Oil/Optima/Superchips/Flowmaster 40's/2.5" cat-back - 14.854@92.37 Read my Rx-7 Build Thread! http://rotarycarclub.com/rotary_foru...ed=1#post70955 Get on the new RCC 1/4 Mile ET List! http://www.rotarycarclub.com/rotary_...read.php?t=368 Vote for the ROTM! http://rotarycarclub.com/rotary_foru...play.php?f=125

02-04-2009, 09:47 PM	#2
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan iTrader: (1) Posts: 530 Rep Power: 17	Michael I installed Billy's camber plates year before last. Very simple job. Just keep in mind that with stock sized springs you will be limited in movement, which will restrict how much camber you can get out of them. I got enough adjustment to make a very noticeable difference when I was running RB springs, but once I moved up to coilovers (smaller diameter springs) I had all the adjustment I could ever need. For autocross, I'm running probably about 75% of the camber available to me. But don't feel like you need to wait until you have coilovers to add the camber plates, they're still well worth it when used in conjunction with stock sized springs. Excellent quality part too (of course). . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode