Anyone have experience with OBX ehaust?

RoughRex · 02-01-2009, 12:12 AM

I just lost my main cat and I'm thinking it's upgrade time. I'd rather stick with duals but it's hard to beat $200 (see ebay) for a stainless catback. I'd like to know how well this exhaust holds up and sounds. http://www.obxracingsports.com/products.php?pk=1104

Also, the car has to pass emissions and I'm not willing to drop the kinda bank anyone wants for the stock cats. I'm looking at these bonez high flow cats at www.rx7.com. Does anyone have any experience with these? would the car even pass emissions with a header and cat combo? http://www.rx7.com/store/rx7/fcexhaust.html

Thanks for any info guys.

Max777 · 02-01-2009, 12:02 PM

ok, so here is the problem with the exhaust that I've heard TWO people say:

the long, straight pipe that goes from the axle to the header is too short to bolt right up to it.... so you either cut it short and add a cat/presilencer, or add an extension if you want it to bolt straight to the header flange.

Also, that is WAY overpriced on the wesite. you can get one of those for $200 plus shipping on ebay.

As far as the cat, bonez are ok, but if you only need it to be temp, here's a cheap alternative:

http://cgi.ebay.com/ebaymotors/1988-...Q5fAccessories

If you have a header:

http://cgi.ebay.com/ebaymotors/CATAL...Q5fAccessories

EDIT: I was actually going to buy that system myself, but with some poking around, I managed to find a mint condition HKS Silent Hi-Power for 375 shipped! I'm sure if you look around no-pistons, evilforum, and ebay enough, you will find a great deal on exhaust components.

EDIT #2: got my RB header for 150 shipped from some guy as well.

Roen · 02-05-2009, 10:49 AM

Remember, cheap usually costs more in the end, especially for exhausts.

classicauto · 02-05-2009, 03:32 PM

Bonez high flow cat:

Bought a 3" one last year for $250whatever.......installed it. Drove around here breaking in the engine. Drove down to DGRR. Took a midnight cruise through the dragon. Blew half of it out. Removed the other half when I got back home because it was clogged and could only make 6psi

Never again will I pay that much for a cat

Fidelity101 · 02-05-2009, 06:06 PM

cheap and probably rusts a lot quicker, I dunno if it rusts quicker than rustsetter errrr I mean....pacesetter but it could.

djmtsu · 02-05-2009, 06:33 PM

Corksport systems are pretty damn cheap......unfortunately they are also stupid loud.

Of course I have only heard the single exhaust system on Pauls GTUs with no cats. LOUD!

RoughRex · 02-05-2009, 09:00 PM

I'd like to get something that's a little more subtle. Preferably no huge exhaust tip and not too noisy. I would prefer it to be polished and seamless though. I found this cat on ebay that I could go with instead of the bonez: http://cgi.ebay.com/ebaymotors/ws/eB...ht_5025wt_1024

I'm still not sure on the OBX exhaust though, no one has first hand experience? I found this video on Youtube but it's always hard to tell what it REALLY sounds like. It does seem to sound ok through my speakers though. http://www.youtube.com/watch?v=8SWEqkicPxw

02-01-2009, 12:12 AM	#1
RoughRex Out of Nickels and Dimes Join Date: Mar 2008 Location: Nashville, TN iTrader: (0) Posts: 192 Rep Power: 17	Anyone have experience with OBX ehaust? I just lost my main cat and I'm thinking it's upgrade time. I'd rather stick with duals but it's hard to beat $200 (see ebay) for a stainless catback. I'd like to know how well this exhaust holds up and sounds. http://www.obxracingsports.com/products.php?pk=1104 Also, the car has to pass emissions and I'm not willing to drop the kinda bank anyone wants for the stock cats. I'm looking at these bonez high flow cats at www.rx7.com. Does anyone have any experience with these? would the car even pass emissions with a header and cat combo? http://www.rx7.com/store/rx7/fcexhaust.html Thanks for any info guys. __________________ 1988 GXL Last edited by RoughRex; 02-01-2009 at 12:23 AM..

02-05-2009, 06:06 PM	#5
Fidelity101 Reliable Source Join Date: Nov 2008 Location: Michigan/Illinois iTrader: (1) Posts: 336 Rep Power: 17	cheap and probably rusts a lot quicker, I dunno if it rusts quicker than rustsetter errrr I mean....pacesetter but it could. __________________ My Rx-7 Vids

02-05-2009, 06:33 PM	#6
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Corksport systems are pretty damn cheap......unfortunately they are also stupid loud. Of course I have only heard the single exhaust system on Pauls GTUs with no cats. LOUD! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-05-2009, 09:00 PM	#7
RoughRex Out of Nickels and Dimes Join Date: Mar 2008 Location: Nashville, TN iTrader: (0) Posts: 192 Rep Power: 17	I'd like to get something that's a little more subtle. Preferably no huge exhaust tip and not too noisy. I would prefer it to be polished and seamless though. I found this cat on ebay that I could go with instead of the bonez: http://cgi.ebay.com/ebaymotors/ws/eB...ht_5025wt_1024 I'm still not sure on the OBX exhaust though, no one has first hand experience? I found this video on Youtube but it's always hard to tell what it REALLY sounds like. It does seem to sound ok through my speakers though. http://www.youtube.com/watch?v=8SWEqkicPxw __________________ 1988 GXL

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-01-2009, 12:02 PM	#2
Max777 Pirate Join Date: Mar 2008 Location: Central IL iTrader: (5) Posts: 1,323 Rep Power: 18	ok, so here is the problem with the exhaust that I've heard TWO people say: the long, straight pipe that goes from the axle to the header is too short to bolt right up to it.... so you either cut it short and add a cat/presilencer, or add an extension if you want it to bolt straight to the header flange. Also, that is WAY overpriced on the wesite. you can get one of those for $200 plus shipping on ebay. As far as the cat, bonez are ok, but if you only need it to be temp, here's a cheap alternative: http://cgi.ebay.com/ebaymotors/1988-...Q5fAccessories If you have a header: http://cgi.ebay.com/ebaymotors/CATAL...Q5fAccessories EDIT: I was actually going to buy that system myself, but with some poking around, I managed to find a mint condition HKS Silent Hi-Power for 375 shipped! I'm sure if you look around no-pistons, evilforum, and ebay enough, you will find a great deal on exhaust components. EDIT #2: got my RB header for 150 shipped from some guy as well. __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 02-01-2009 at 12:14 PM..

02-05-2009, 10:49 AM	#3
Roen Evil Club Mod Join Date: Feb 2008 iTrader: (0) Posts: 183 Rep Power: 17	Remember, cheap usually costs more in the end, especially for exhausts.