FS: BBS Mahle Mesh 5x114.3, 15x8, -20 offset w/tires

DriftHappy · 01-29-2009, 03:18 PM

I have an ultra clean & very light set of old school BBS Mahle Mesh wheels. Gold with a polished lip. 5x114.3, 15x8, NEGATIVE 20 offset. These babies are mint, I have the original BBS center caps I will include. The lip is 4", backspacing is 3.5", and have about 1/2" caliper clearance. I have a brand new set of 205/60 Falken ZE512s with 20 miles, stretched and mounted on them. I just put them on the car for fitting. You FC guys will have to run wide fenders up front and will need to run about a 6mm spacer to clear 4 piston calipers. The rear pictures are without a spacer and with Tein Lowering Springs. S13 & Starion guys just need a roll & slight pull to fit these. I dont want to have to put wide fenders on my TII so I'm going to let loose of these for cheap. Looking to get $800 with tires or $600 without. I'm open to trades, 5x114.3 & RWD offsets only please. Just pm or e-mail me if you have a question, offer, or want to see more pics.

Later,
Anthony
Awfernald@hotmail.com

85rx-7gsl-se · 01-29-2009, 04:42 PM

These are sooo sexy man

Nopis1O · 02-21-2009, 10:38 AM

those are sick but look narsty on the car. i see a lexus in my town running around with like 16x8 gold with a polished lip bbs wheels are the factory on them?

FREE BUMB for bozo old skool wheels

Whizbang · 02-21-2009, 11:15 AM

those would be SOOO sexy for the FB once i go my conversion.

bigtony08 · 02-24-2009, 10:09 AM

are thoes old chevy wheels?

heylookatthatrx7 · 07-30-2009, 03:12 AM

Quote:

Originally Posted by bigtony08

are thoes old chevy wheels?

Chevy makes different bolt patterns, so I highly doubt it...

mazdadude7 · 07-30-2009, 08:42 PM

any pictures of them on the car?

01-29-2009, 03:18 PM	#1
DriftHappy Master of Pantslessness Join Date: Jan 2009 Location: Hot Springs, Arkansas iTrader: (0) Posts: 13 Rep Power: 0	FS: BBS Mahle Mesh 5x114.3, 15x8, -20 offset w/tires I have an ultra clean & very light set of old school BBS Mahle Mesh wheels. Gold with a polished lip. 5x114.3, 15x8, NEGATIVE 20 offset. These babies are mint, I have the original BBS center caps I will include. The lip is 4", backspacing is 3.5", and have about 1/2" caliper clearance. I have a brand new set of 205/60 Falken ZE512s with 20 miles, stretched and mounted on them. I just put them on the car for fitting. You FC guys will have to run wide fenders up front and will need to run about a 6mm spacer to clear 4 piston calipers. The rear pictures are without a spacer and with Tein Lowering Springs. S13 & Starion guys just need a roll & slight pull to fit these. I dont want to have to put wide fenders on my TII so I'm going to let loose of these for cheap. Looking to get $800 with tires or $600 without. I'm open to trades, 5x114.3 & RWD offsets only please. Just pm or e-mail me if you have a question, offer, or want to see more pics. Later, Anthony Awfernald@hotmail.com __________________ '04 WRX Sti ~ '86 RX7 Base ~ '87 RX7 TII ~ '88 RX7 GTU ~ '86 RX7 GXL ~ '92 240sx ~ '02 Protege ES Arkansas RX7 Club

02-21-2009, 10:38 AM	#3
Nopis1O Rotary Fanatic Join Date: Apr 2008 Location: Mid State Illinois iTrader: (0) Posts: 159 Rep Power: 17	those are sick but look narsty on the car. i see a lexus in my town running around with like 16x8 gold with a polished lip bbs wheels are the factory on them? FREE BUMB for bozo old skool wheels __________________ 1988 Fc Vert. Super Stock 1990 Fc Hard top: Brideported 13b, weber carb, 350z wheels w/nitrogen, or 16in BBS meshies, Msd, Racaro Racing Seats, Custom Gauge cluster, custom Intake, Relocated Battery, 3inch header back borla exhaust system, Alpine stereo system, Wire tucked, S4 shift boot&knob, custom Strut bar, And soon to come a Full black w/ gold pearl paint job, powder coated break calipers, all black interior, bride headliner/door panels.

02-21-2009, 11:15 AM	#4
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	those would be SOOO sexy for the FB once i go my conversion. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-24-2009, 10:09 AM	#5
bigtony08 obsessed rotard Join Date: Jan 2009 iTrader: (0) Posts: 249 Rep Power: 16	are thoes old chevy wheels?

07-30-2009, 08:42 PM	#7
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	any pictures of them on the car?