Group Buy

rotaryextreme · 12-01-2008, 12:48 PM

Starting Janurary, details will be givin then.

Group buy on

FD engine Dampers
FD Trailing arms and toelinks

In March I will have a group buy on the FD v-mount after the revision of the brackets and ducting is complete. This kit is being revised due to driver feedback from drift drivers and also it is being updated to support race-spec time attack cars.

I am working with Falken signed driver Calvin Wan and refreshing his FD with the new set-up. The new set-up will be robust and will not interfere with the tow hooks which are used on drift and time attck cars. The new kit will include ducting. The kit will be a complete bolt on affair and will still allow you to keep A/C with the exception of the A/C lines which still require minor modification if you wish to keep your A/C.

Thank you,
Ben-Rotary Extreme

rotaryextreme · 02-02-2009, 03:25 PM

Hello,

Does anybody have any request on group buys or any questions about what's up and comming?

Ben

HDP · 02-02-2009, 04:02 PM

I need toelinks and pillow balls...

rotaryextreme · 02-02-2009, 06:50 PM

HDP, pm sent

blackr1 · 02-04-2009, 05:02 PM

anything about the old RE Headlights?

prrex4ever · 02-05-2009, 11:59 PM

How about the Feed style side skirts. Can't find them anywhere in carbon fiber except the authentic ones and they are $$$$$$.

rotaryextreme · 02-06-2009, 03:08 AM

I'm a little late on the aero kit section but it is going to re-open. As for the lights, I am getting everything to make them again but I'm also looking into the lexan cover to see if it is cost effective to have it shaped with the same contour as the pop-up cover. Otherwise it will remain a flat piece.

Ben

blackr1 · 02-06-2009, 09:03 AM

that would be really cool if it followed the same lines.

RIZZXX7 · 04-06-2009, 09:12 AM

oil cooler setup for fd?

rotaryextreme · 04-06-2009, 11:49 AM

RIZZXX7 pm'd

imstillonjava · 04-07-2009, 12:50 AM

how goes things with the vmount?

rotaryextreme · 04-07-2009, 01:45 AM

half way there on the new design...almost done

blackr1 · 04-15-2009, 02:13 PM

how about the headlights?

rotaryextreme · 04-16-2009, 12:18 PM

I have located everything to re-make it. But I need to put one togther on my own first before I re-release it to make sure it has everything. Also it will be the same as before. You will have to pr-heat the lexan to get it to form to the housing, That way it matches the lines. This is something that I am thinking of doing so that the customers do not have to.

12-01-2008, 12:48 PM	#1
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	Group Buy Starting Janurary, details will be givin then. Group buy on FD engine Dampers FD Trailing arms and toelinks In March I will have a group buy on the FD v-mount after the revision of the brackets and ducting is complete. This kit is being revised due to driver feedback from drift drivers and also it is being updated to support race-spec time attack cars. I am working with Falken signed driver Calvin Wan and refreshing his FD with the new set-up. The new set-up will be robust and will not interfere with the tow hooks which are used on drift and time attck cars. The new kit will include ducting. The kit will be a complete bolt on affair and will still allow you to keep A/C with the exception of the A/C lines which still require minor modification if you wish to keep your A/C. Thank you, Ben-Rotary Extreme __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08. Last edited by rotaryextreme; 03-12-2009 at 08:19 AM..

02-02-2009, 03:25 PM	#2
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	Hello, Does anybody have any request on group buys or any questions about what's up and comming? Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

02-02-2009, 06:50 PM	#4
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	HDP, pm sent __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

02-06-2009, 03:08 AM	#7
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	I'm a little late on the aero kit section but it is going to re-open. As for the lights, I am getting everything to make them again but I'm also looking into the lexan cover to see if it is cost effective to have it shaped with the same contour as the pop-up cover. Otherwise it will remain a flat piece. Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

04-06-2009, 09:12 AM	#9
RIZZXX7 DIGG7ER Join Date: Mar 2009 Location: VIRGINIA BEACH iTrader: (0) Posts: 94 Rep Power: 16	oil cooler setup for fd? __________________ EXCELLENCE IS NEVER AN ACCIDENT, IT IS ALWAYS THE RESULT OF HIGH INTENTION, SINCERE EFFORT, INTELLIGENT DIRECTION, SKILLFUL EXECUTION AND THE VISION TO SEE OBSTACLES AS OPPORTUNITY...

02-02-2009, 04:02 PM	#3
HDP Rotary Fanatic Join Date: Feb 2008 Location: HuntsVEGAS iTrader: (0) Posts: 249 Rep Power: 17	I need toelinks and pillow balls...

02-04-2009, 05:02 PM	#5
blackr1 The Newbie Join Date: Feb 2009 iTrader: (0) Posts: 3 Rep Power: 0	anything about the old RE Headlights?

02-05-2009, 11:59 PM	#6
prrex4ever Rotary Fanatic Join Date: Oct 2008 iTrader: (1) Posts: 274 Rep Power: 17	How about the Feed style side skirts. Can't find them anywhere in carbon fiber except the authentic ones and they are $$$$$$.

02-06-2009, 09:03 AM	#8
blackr1 The Newbie Join Date: Feb 2009 iTrader: (0) Posts: 3 Rep Power: 0	that would be really cool if it followed the same lines.

04-06-2009, 11:49 AM	#10
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	RIZZXX7 pm'd __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

04-07-2009, 12:50 AM	#11
imstillonjava Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 108 Rep Power: 17	how goes things with the vmount?

04-07-2009, 01:45 AM	#12
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	half way there on the new design...almost done __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

04-15-2009, 02:13 PM	#13
blackr1 The Newbie Join Date: Feb 2009 iTrader: (0) Posts: 3 Rep Power: 0	how about the headlights?

04-16-2009, 12:18 PM	#14
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City iTrader: (1) Posts: 250 Rep Power: 17	I have located everything to re-make it. But I need to put one togther on my own first before I re-release it to make sure it has everything. Also it will be the same as before. You will have to pr-heat the lexan to get it to form to the housing, That way it matches the lines. This is something that I am thinking of doing so that the customers do not have to. __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode