Go Back   Rotary Car Club > Tech Discussion > RX-7 2nd Gen Specific (1986-92)

RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections.

Reply
 
Thread Tools Display Modes
Old 11-18-2008, 11:46 PM   #1
hhn2002
The Newbie
 
Join Date: Oct 2008
iTrader: (0)
Posts: 4
Rep Power: 0
hhn2002 is on a distinguished road
Default brakes suck

i drive a 91 vert. my brakes suck...alot. no abs. i could probably stick my feet through the floor like fred flinstone and still stop faster. is this normal?






hhn2002 is offline   Reply With Quote
Old 11-18-2008, 11:49 PM   #2
Phoenix7
FUCK the fucking fuckers
 
Phoenix7's Avatar
 
Join Date: Mar 2008
Location: THE only Bay Area, Northern California
iTrader: (7)
Posts: 3,172
Rep Power: 20
Phoenix7 will become famous soon enough
Default

NO! Not normal. How's your brake fluid? Did you check your brake system? How long ago did you service the brakes?
__________________
Quote:
Originally Posted by Monkman33 View Post
But I've learned that people that don't like guns, tend to like stretched tires.

Which makes perfect sense. They are sacrificing safety either way. lol


Phoenix7 is offline   Reply With Quote
Old 11-19-2008, 12:41 AM   #3
RoughRex
Out of Nickels and Dimes
 
RoughRex's Avatar
 
Join Date: Mar 2008
Location: Nashville, TN
iTrader: (0)
Posts: 192
Rep Power: 17
RoughRex is on a distinguished road
Default

1. Check fluid level, refill and bleed as necessary.
2. Does the brake pedal stick down? If yes then replace or rebuild the Master Cylinder.
3. If the pedal does not stick down and you have completed step 1, search the system for leaks.
4 If there are no leaks, ensure that the vacuum line is still connected properly to the Brake Booster and there is sufficient vacuum present.
5. Check for proper adjustment of he brake pedal
6. If the Brake Booster is getting vacuum and all steps above have been done, replace the Brake Booster.
__________________
1988 GXL
RoughRex is offline   Reply With Quote
Old 11-19-2008, 05:39 AM   #4
SpooledupRacing
Guest
 
Posts: n/a
Default

Another thing is to look at your brakes themselves..

a low worn pad will cause for a nasty pedal and nasty bite (especially on a cheep junk pad)

my suggestions is:

If there are no leaks.

replace all the pads and rotors (with quality pads)
Get a couple bottles of brake fluid (dot 3 or dot 4) and begin to bleed the ENTIRE system (doing each wheel a numerous amount of times)
change out atleast one full bottle of brake fluid that way u can get all the old nasty brake fluid out and start fresh.

Good luck
  Reply With Quote
Old 11-19-2008, 09:39 AM   #5
Max777
Pirate
 
Max777's Avatar
 
Join Date: Mar 2008
Location: Central IL
iTrader: (5)
Posts: 1,323
Rep Power: 18
Max777 is on a distinguished road
Default

Hmm, well personally, one of the problems I encountered was that my caliper pistons were sticking, causing irregular pad wear, so I would make sure to take a look at your pads to see that they are worn down even.

Another little thing: The bleeder screws on our cars are notorious for snapping clean off, so i would put some anti-seize on them to prevent that from happening.

...now, if your calipers are old and look junky, you can get some rebuilt ones at Car Quest for $65 each when you bring the old ones in with you.
__________________
Rotaries:They are NOT that complicated!
Max777 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com
Ad Management by RedTyger