Finally got me some wheels

bop_rocco · 03-03-2008, 11:35 AM

i finally have some wheels for the fd, they are SSR SP1's in 18x9 and 18x10, just gotta get em mounted. have 275/35 18's and 255/35/18 bridgestone 50a's going on them but the 255 may not work we will see. ill post pics soon.

David Jerome · 03-04-2008, 12:28 AM

Beautiful wheels.

bop_rocco · 03-04-2008, 09:48 AM

thanks, im not shure about the black on the MB. but if i dont like it ill get em painted silver.

7_rocket · 03-04-2008, 10:56 PM

Why didn't you go with Work Meister s1's?

bop_rocco · 03-05-2008, 08:15 AM

price, i got these at a deal, plus the works are about 200 more a wheel. and these are kinda light for a 3 piece wheel the 18x10's are about 22lbs

Uncle Hungry · 03-07-2008, 08:13 PM

Why do you think they won't fit? What is your front offset? I have meister's with 255/35/18 kdw2 rubber and a +48 offset on a 18x9 up front and that was the recommended tire size. Btw they should arive in a couple weeks so no pics yet lol. Edit, now I see. Your offsets are about opposite of mine . I'm + 48 in front on a 18x9 and + 43 in the rear on a 18x10. I prefer a more staggered look.

Lawyer's Spirit · 03-08-2008, 06:24 PM

Love the rims, but I also wonder how they will look on MB. I own an MB and I think it is the hardest colour out of the FD lineup to match wheels for.

2MCHPWR · 03-08-2008, 07:40 PM

nice. did you get them from tirerack? i got SSR comps cheap from there recently because they aren't gonna carry them anymore.

-xlr8planet- · 03-08-2008, 07:52 PM

sexy

warwickben · 03-09-2008, 10:02 AM

i hate you guys, sa's are stuck with the 4x110 bolt patten. i am going to go with koing rewinds, since i cant get the rotor wheels in the states. post pics -xlr8planet-.

bop_rocco · 03-10-2008, 07:47 AM

i test fit the fronts yesterday. seem ok but im cutting it verry close but i dont think i will have to roll fenders. but the rear i want to know if i can run 5 mm spacers out back. like these http://www.racinglab.com/whmalialwhsp1.html
is there any prob with the hubcentric rings and running spacers?

but yes they came from tire rack originally. rx7will on "the other site" bought them and sold em to me cause he went another route.

bop_rocco · 03-10-2008, 10:24 AM

also if i ran 5 mm spacers out back do i have to replace the studs for longer ones?

bop_rocco · 03-11-2008, 07:31 AM

can anyone answer this for me?

bop_rocco · 03-12-2008, 11:01 AM

?

bop_rocco · 03-18-2008, 07:43 AM

here are some pics from my phone, i'll get better ones later. nothing rubs as far as i can tell but im taking out the bolts under the front fender that holds the fender liner and i will get 5 mm spacers for the rear to put the rim at +44mm.

03-03-2008, 11:35 AM	#1
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	Finally got me some wheels i finally have some wheels for the fd, they are SSR SP1's in 18x9 and 18x10, just gotta get em mounted. have 275/35 18's and 255/35/18 bridgestone 50a's going on them but the 255 may not work we will see. ill post pics soon. __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon.

03-04-2008, 12:28 AM	#2
David Jerome RCC Contributor Join Date: Jan 2008 Posts: 713 Rep Power: 18	Beautiful wheels. __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work

03-04-2008, 09:48 AM	#3
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	thanks, im not shure about the black on the MB. but if i dont like it ill get em painted silver. __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon.

03-04-2008, 10:56 PM	#4
7_rocket Rotary Fanatic Join Date: Mar 2008 Location: Toronto Posts: 117 Rep Power: 18	Why didn't you go with Work Meister s1's? __________________ http://www.rotarydynamics.ca

03-05-2008, 08:15 AM	#5
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	price, i got these at a deal, plus the works are about 200 more a wheel. and these are kinda light for a 3 piece wheel the 18x10's are about 22lbs __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon. Last edited by bop_rocco; 03-05-2008 at 08:32 AM.

03-07-2008, 08:13 PM	#6
Uncle Hungry The Newbie Join Date: Feb 2008 Location: 600' up Posts: 20 Rep Power: 0	Why do you think they won't fit? What is your front offset? I have meister's with 255/35/18 kdw2 rubber and a +48 offset on a 18x9 up front and that was the recommended tire size. Btw they should arive in a couple weeks so no pics yet lol. Edit, now I see. Your offsets are about opposite of mine . I'm + 48 in front on a 18x9 and + 43 in the rear on a 18x10. I prefer a more staggered look. __________________ www.full-race.com Anything else is half-fast Last edited by Uncle Hungry; 03-07-2008 at 08:16 PM.

03-08-2008, 06:24 PM	#7
Lawyer's Spirit The Newbie Join Date: Mar 2008 Posts: 18 Rep Power: 0	Love the rims, but I also wonder how they will look on MB. I own an MB and I think it is the hardest colour out of the FD lineup to match wheels for.

03-08-2008, 07:40 PM	#8
2MCHPWR The Newbie Join Date: Mar 2008 Location: NY Posts: 19 Rep Power: 0	nice. did you get them from tirerack? i got SSR comps cheap from there recently because they aren't gonna carry them anymore. __________________ 1993 Mazda Rx7 with 370 LS1 & t56 10.97 at 127 on radials www.Ponycars.Net

03-08-2008, 07:52 PM	#9
-xlr8planet- RCC Contributor Join Date: Feb 2008 Location: Buenos Aires, Argentina Posts: 679 Rep Power: 18	sexy __________________ www.rx7club.com.ar RX-7 Forum in Spanish I make custom decals. Yes, you can ask me

03-09-2008, 10:02 AM	#10
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma Posts: 408 Rep Power: 18	i hate you guys, sa's are stuck with the 4x110 bolt patten. i am going to go with koing rewinds, since i cant get the rotor wheels in the states. post pics -xlr8planet-.

03-10-2008, 07:47 AM	#11
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	i test fit the fronts yesterday. seem ok but im cutting it verry close but i dont think i will have to roll fenders. but the rear i want to know if i can run 5 mm spacers out back. like these http://www.racinglab.com/whmalialwhsp1.html is there any prob with the hubcentric rings and running spacers? but yes they came from tire rack originally. rx7will on "the other site" bought them and sold em to me cause he went another route. __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon. Last edited by bop_rocco; 03-10-2008 at 07:48 AM. Reason: link messed up

03-10-2008, 10:24 AM	#12
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	also if i ran 5 mm spacers out back do i have to replace the studs for longer ones? __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon.

03-11-2008, 07:31 AM	#13
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	can anyone answer this for me? __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon.

03-12-2008, 11:01 AM	#14
bop_rocco Rotary Fanatic Join Date: Feb 2008 Location: Kodak, TN Posts: 104 Rep Power: 18	? __________________ PwrFC, Twins @ 14lbs, 1300 sec w/supra pump, smic w/ pettit intake, M2 cf intake, 3in downp-mid w/ Carbon Ti, mazda perf radiator, dvd/tv, mazdaspeed cf lip and cf feed sides, SSR sp1's 18-9's and 10's - 255-275 re-a diffuser, and 99front and wing soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode