10th ae problems

IH8DSM · 10-12-2008, 11:23 AM

ok so my friend has a 10th ae that were trying to get running the motors a fresh rebuild along with new clutch. Now the problems we cant seem to get it to run, it just sits there and cranks, its getting both gas and spark and making combustion. Is there anything thats a common problem on a 2nd gen that is something stupid that usually is the problem? We took all the emissions stuff off thinking that would help and welded the twin scroll open someone said that that should help and still no luck. any help would be great.

djmtsu · 10-12-2008, 11:39 AM

Last time I was over there it was VERY flooded. Did you put some new plugs in it yet?

Have you tried to see if it will fire with starting fluid?

IH8DSM · 10-12-2008, 12:06 PM

yea dj we've swapped plugs a few times and nothing tried the oil down the intake runners and still nothing.

rx7 vinnie · 10-12-2008, 01:39 PM

easy fix.....sell it to me

IH8DSM · 10-12-2008, 02:49 PM

haha well we got it to run sorta, it wont idle, and it takes starting fluid and some used oil in the intake for it to fire up. i got some videos of it on my phone ill post up later.

and no vinnie you cant have haha

10-12-2008, 11:23 AM	#1
IH8DSM RCC Contributor Join Date: Mar 2008 iTrader: (0) Posts: 610 Rep Power: 17	10th ae problems ok so my friend has a 10th ae that were trying to get running the motors a fresh rebuild along with new clutch. Now the problems we cant seem to get it to run, it just sits there and cranks, its getting both gas and spark and making combustion. Is there anything thats a common problem on a 2nd gen that is something stupid that usually is the problem? We took all the emissions stuff off thinking that would help and welded the twin scroll open someone said that that should help and still no luck. any help would be great. __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run

10-12-2008, 11:39 AM	#2
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Last time I was over there it was VERY flooded. Did you put some new plugs in it yet? Have you tried to see if it will fire with starting fluid? __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

10-12-2008, 12:06 PM	#3
IH8DSM RCC Contributor Join Date: Mar 2008 iTrader: (0) Posts: 610 Rep Power: 17	yea dj we've swapped plugs a few times and nothing tried the oil down the intake runners and still nothing. __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run

10-12-2008, 01:39 PM	#4
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) iTrader: (0) Posts: 743 Rep Power: 17	easy fix.....sell it to me __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

10-12-2008, 02:49 PM	#5
IH8DSM RCC Contributor Join Date: Mar 2008 iTrader: (0) Posts: 610 Rep Power: 17	haha well we got it to run sorta, it wont idle, and it takes starting fluid and some used oil in the intake for it to fire up. i got some videos of it on my phone ill post up later. and no vinnie you cant have haha __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode