|
08-31-2008, 11:59 PM | #1 |
Rotary Fan in Training
|
Ame Cai
Orered and just got today a AME (same as Mazdaspeed) CAI from Cork Sport, good people to deal with
Apart from removing the front bumper and the std Filter case and pumping, it all went together easy And has made a big difference from the std, and I would say its better than the KnN Tyhoon V2, I've had on for the last year or so. Last edited by rx8man; 09-01-2008 at 12:14 AM.. Reason: typo |
09-01-2008, 04:00 PM | #6 |
Rotary Fan in Training
|
Ame Cai
More Than happy with the out come, Noticed a big difference in response, over the std filter box, and its better than the KnN Tyhoon V2 I had on the Rx8 for a year & quieter than the KnN as well
|
09-01-2008, 05:35 PM | #8 | |
Rotary Fan in Training
|
remove bumber for CAI
Quote:
I've read that the MS Version has one rubber hose & pipe less, is that true? |
|
09-02-2008, 03:11 PM | #10 |
Rotary Fan in Training
|
difference betwen MS and AME CAI
I readed that tha Madazspeed CAI has a one less hose and pipe fitting, so I google and got this pic.
sumdeus-- Does your MS have one or two wire sreens in line?? |
09-02-2008, 08:02 PM | #13 |
Rotary Fan in Training
|
Ms CAI
Cheers, Thanks for the Info, I've been told wrong then.
I did some data logging, and the Air temps with the CAI are up to a 2/3 lower than what I was getting with the KnN pod filter around town The KnN would drop again once you started moving, but always sucked up the hot air off the radiator when not moving. Last edited by rx8man; 09-02-2008 at 08:10 PM.. |
09-07-2008, 11:52 PM | #14 |
The Newbie
|
Can you drive in rain with the AEM?
__________________
|
09-08-2008, 03:48 PM | #15 |
Rotary Fanatic
|
|