S4 Wastegate porting

impulsive-RX7 · 06-15-2008, 08:31 PM

Bryan

I just acquired a hybrid turbo. It has an S4 turbine housing; I need to get the wastegate ported. I don't have the hook up at the 2nd Maintenance Battalion machine shop like I used to. Can I ship the turbine housing by itself to you, and how much would it cost me? Also, what would you estimate the turn around time to be?

Thanks

Jason

Bryan@BNR · 06-17-2008, 01:12 PM

$225 for the turbine housing to be machined, and the stainless valve assembly to be installed. The port is around 33mm right off the machine, but I can easily hand port that to around 35mm.

Bryan@BNR
205 640 1193

06-15-2008, 08:31 PM	#1
impulsive-RX7 Rotary Fanatic Join Date: Feb 2008 Location: Jacksonville, NC iTrader: (0) Posts: 105 Rep Power: 17	S4 Wastegate porting Bryan I just acquired a hybrid turbo. It has an S4 turbine housing; I need to get the wastegate ported. I don't have the hook up at the 2nd Maintenance Battalion machine shop like I used to. Can I ship the turbine housing by itself to you, and how much would it cost me? Also, what would you estimate the turn around time to be? Thanks Jason

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-17-2008, 01:12 PM	#2
Bryan@BNR Rotary Fanatic Join Date: Feb 2008 iTrader: (2) Posts: 302 Rep Power: 17	$225 for the turbine housing to be machined, and the stainless valve assembly to be installed. The port is around 33mm right off the machine, but I can easily hand port that to around 35mm. Bryan@BNR 205 640 1193