94 Chaste white build

fdeeznutz · 02-26-2008, 08:13 PM

The car, as purchased in 2002 54k miles(minus the wing, Eibachs, and Mazdaspeed MS01 wheels)
It had Apex-i intakes, Trust catback, mid+down pipe, Power FC. I later added a Eibach's, Peter Farrell SMIC, Pettit power pulley, Greddy pullies, HKS BOV, 99 spec front lip, and Advan 18's.
The car made 301rwhp and 298 tq at 10psi. Had the Power FC tuned by Steve Kahn.
Pictures in chronological order.

This was the last picture taken right before I started tearing into the motor.^^

I originally had a leak coming from the front cover on a 15k mile reman.
I was only going to fix the oil leak and put new motor mounts in but things started looking bad.
I pulled the turbos and they were absolutely trashed, huge cracks, oil coming from everywhere. I tossed them out and started looking around for something to replace the poor turbos. Meanwhile I sent the motor off to have them tear it down fix the leak and make sure everything looked good. Well.....I got a call a little later, it needed a rebuild. I was starting to see a chance for me to change nearly everything at once, not an easy task.
I wanted a fairly reliable car once I had everything done so no huge turbos for me. I am not building my car for HP. I want it to be responsive and fun to drive.
List of parts, almost everything is new.

MOTOR & EXHAUST,
AZRR ported motor
AZRR oil pan brace
4CNAir poly motor mounts
ACT S/S clutch kit
ACT streetlite flywheel
Goodridge S/S clutch line
Greddy TD06 Turbo
Greddy SUS ceramic coated manifold
Greddy W/G
Ceramic coated down pipe
Pettit mid pipe
HKS Drager cat back
ASP/M2 medium SMIC
Tial BOV
Fluidyne Radiator
Fighters Garage AST
Rotary Performance S/S OMP lines
FUEL/ELECTRONICS
Supra fuel pump
Innovate LC-1/XD-16 wide band
AZRR secondary rail
1600cc injectors
Aeromotive FPR
SUSPENSION/WHEELS
Tein Flex coilovers
Chrome R-1 strut bar
Blitz 03, Blitz silver 18x8-18x9
INT/EXT
Redline leather accents
Greddy V-1 Boost gauge
Innovate XD-16 wide band gauge
Shineauto/Feed side steps
Tein hood dampers
OTHER
Cerama-Chrome front cover (Cerama-chrome stuff courtesy of GoodfellasFD3S)
Cerama-Chrome LIM
Cerama-Chrome BOP's
Polished UIM
Polished T/B

fdeeznutz · 02-26-2008, 08:16 PM

New motor courtesy of Arizona Rotary Rockets

I just dropped the motor in last weekend, I'll post more pictures as I get things hooked up.

djmtsu · 02-26-2008, 09:19 PM

Damn, that looks fantastic.

I love white cars (see sig), and if I were to ever break down and buy an FD, it would HAVE to be white. Which is impossible to find!!

Good build.

fdeeznutz · 02-27-2008, 01:06 PM

It's in the car finally!

Brent · 02-27-2008, 01:22 PM

Looking good!!! I remember the first time I ever saw your username... I was at work drinking something and spit it on the computer screen. Can't wait to see it finished.

02-27-2008, 01:34 PM

VERY nice.. I am super impressed... keep this thread going..

fdeeznutz · 02-27-2008, 07:56 PM

Thanks guys.

A couple more pictures,

Look at this nasty thing

Stock turbos 70k miles, rough shape to say the least.

Coming out

New motor. Street ported, new rotor housings.

a7xh7 · 03-10-2008, 04:35 PM

nice oil pan brace who makes that?

and that is a lot of sealant? or what is that red stuff, i thought it was best to keep it at the feet areas of the housings only

fdeeznutz · 03-17-2008, 12:48 PM

Quote:

Originally Posted by a7xh7

nice oil pan brace who makes that?

and that is a lot of sealant? or what is that red stuff, i thought it was best to keep it at the feet areas of the housings only

It's an Arizona Rotary Rockets Brace. Check them out in the vendor section. Also talk to Glen about the red stuff, I don't have a clue.

blwnrtr93 · 03-11-2008, 09:36 AM

White FDs look soooooooooooo good. I'm contemplating a color change on mine about the time the engine pukes up the seals.

Willub and Company · 03-18-2008, 02:03 PM

i demand more pictures. and a video!

BigIslandSevens · 03-20-2008, 09:44 PM

very nice car. I am switching colors to chaste white this year. Something very clean and sleek about a white FD. Keep updating with some interior shots please

thanks, Dave

fdeeznutz · 03-22-2008, 12:20 PM

Thanks guys.
A couple more pics of the interior and wheels. I haven't had much time to work on the 7 lately so it's just sitting. I bought a project truck a while ago that I now need to daily drive and there are tons of things wrong with it. Hopefully I'll have it running soon. Be aware that my car is filthy at the moment and riding high.

Just need a black carpet kit and it should be set.

BigIslandSevens · 03-22-2008, 03:45 PM

nice. Is that the redline shift boot and e-boot? Looks perforated with white stitch Looks really nice. I was thinking of charcoal or black alcantra with white stitching. Very nice again

Dave

fdeeznutz · 03-22-2008, 10:08 PM

Quote:

Originally Posted by BigIslandSevens

nice. Is that the redline shift boot and e-boot? Looks perforated with white stitch Looks really nice. I was thinking of charcoal or black alcantra with white stitching. Very nice again

Dave

Dave,
Yup, Redline perforated with white stitching, good eye

02-26-2008, 08:13 PM	#1
fdeeznutz The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 26 Rep Power: 0	94 Chaste white build The car, as purchased in 2002 54k miles(minus the wing, Eibachs, and Mazdaspeed MS01 wheels) It had Apex-i intakes, Trust catback, mid+down pipe, Power FC. I later added a Eibach's, Peter Farrell SMIC, Pettit power pulley, Greddy pullies, HKS BOV, 99 spec front lip, and Advan 18's. The car made 301rwhp and 298 tq at 10psi. Had the Power FC tuned by Steve Kahn. Pictures in chronological order. This was the last picture taken right before I started tearing into the motor.^^ I originally had a leak coming from the front cover on a 15k mile reman. I was only going to fix the oil leak and put new motor mounts in but things started looking bad. I pulled the turbos and they were absolutely trashed, huge cracks, oil coming from everywhere. I tossed them out and started looking around for something to replace the poor turbos. Meanwhile I sent the motor off to have them tear it down fix the leak and make sure everything looked good. Well.....I got a call a little later, it needed a rebuild. I was starting to see a chance for me to change nearly everything at once, not an easy task. I wanted a fairly reliable car once I had everything done so no huge turbos for me. I am not building my car for HP. I want it to be responsive and fun to drive. List of parts, almost everything is new. MOTOR & EXHAUST, AZRR ported motor AZRR oil pan brace 4CNAir poly motor mounts ACT S/S clutch kit ACT streetlite flywheel Goodridge S/S clutch line Greddy TD06 Turbo Greddy SUS ceramic coated manifold Greddy W/G Ceramic coated down pipe Pettit mid pipe HKS Drager cat back ASP/M2 medium SMIC Tial BOV Fluidyne Radiator Fighters Garage AST Rotary Performance S/S OMP lines FUEL/ELECTRONICS Supra fuel pump Innovate LC-1/XD-16 wide band AZRR secondary rail 1600cc injectors Aeromotive FPR SUSPENSION/WHEELS Tein Flex coilovers Chrome R-1 strut bar Blitz 03, Blitz silver 18x8-18x9 INT/EXT Redline leather accents Greddy V-1 Boost gauge Innovate XD-16 wide band gauge Shineauto/Feed side steps Tein hood dampers OTHER Cerama-Chrome front cover (Cerama-chrome stuff courtesy of GoodfellasFD3S) Cerama-Chrome LIM Cerama-Chrome BOP's Polished UIM Polished T/B Last edited by fdeeznutz; 03-26-2008 at 11:42 PM..

02-26-2008, 09:19 PM	#3
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	Damn, that looks fantastic. I love white cars (see sig), and if I were to ever break down and buy an FD, it would HAVE to be white. Which is impossible to find!! Good build. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

02-27-2008, 01:06 PM	#4
fdeeznutz The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 26 Rep Power: 0	It's in the car finally! __________________ Motor and Fuel system by Arizona Rotary Rockets

02-27-2008, 07:56 PM	#7
fdeeznutz The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 26 Rep Power: 0	Thanks guys. A couple more pictures, Look at this nasty thing Stock turbos 70k miles, rough shape to say the least. Coming out New motor. Street ported, new rotor housings. Last edited by fdeeznutz; 03-06-2008 at 08:52 PM..

03-10-2008, 04:35 PM	#8
a7xh7 Rotary Fan in Training Join Date: Mar 2008 iTrader: (0) Posts: 88 Rep Power: 0	nice oil pan brace who makes that? and that is a lot of sealant? or what is that red stuff, i thought it was best to keep it at the feet areas of the housings only __________________ "sevens_ix"

02-26-2008, 08:16 PM	#2
fdeeznutz The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 26 Rep Power: 0	New motor courtesy of Arizona Rotary Rockets I just dropped the motor in last weekend, I'll post more pictures as I get things hooked up.

02-27-2008, 01:22 PM	#5
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX iTrader: (4) Posts: 839 Rep Power: 17	Looking good!!! I remember the first time I ever saw your username... I was at work drinking something and spit it on the computer screen. Can't wait to see it finished.

02-27-2008, 01:34 PM	#6
SpooledupRacing Guest Posts: n/a	VERY nice.. I am super impressed... keep this thread going..

03-11-2008, 09:36 AM	#10
blwnrtr93 Rotary Fanatic Join Date: Feb 2008 Location: AL iTrader: (1) Posts: 379 Rep Power: 17	White FDs look soooooooooooo good. I'm contemplating a color change on mine about the time the engine pukes up the seals. __________________ 1993 BB RX-7 2005 Black Mazda 6i 1991 Primer Celica GT 1968 Camo Chevy P/U Garfinkle's Airpump Idler Pulley: Keep the stock contact patch on your water pump w/o running Airpump!

03-18-2008, 02:03 PM	#11
Willub and Company Rotary Fanatic Join Date: Mar 2008 Location: Massachusetts iTrader: (2) Posts: 114 Rep Power: 17	i demand more pictures. and a video! __________________ Christian's the name 10AE..BIG turbo and Microtech coming soon!

03-20-2008, 09:44 PM	#12
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC iTrader: (0) Posts: 201 Rep Power: 17	very nice car. I am switching colors to chaste white this year. Something very clean and sleek about a white FD. Keep updating with some interior shots please thanks, Dave

03-22-2008, 12:20 PM	#13
fdeeznutz The Newbie Join Date: Feb 2008 iTrader: (0) Posts: 26 Rep Power: 0	Thanks guys. A couple more pics of the interior and wheels. I haven't had much time to work on the 7 lately so it's just sitting. I bought a project truck a while ago that I now need to daily drive and there are tons of things wrong with it. Hopefully I'll have it running soon. Be aware that my car is filthy at the moment and riding high. Just need a black carpet kit and it should be set. Last edited by fdeeznutz; 03-31-2008 at 08:56 PM..

03-22-2008, 03:45 PM	#14
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC iTrader: (0) Posts: 201 Rep Power: 17	nice. Is that the redline shift boot and e-boot? Looks perforated with white stitch Looks really nice. I was thinking of charcoal or black alcantra with white stitching. Very nice again Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode