Andy T from Midlands UK

andyct355 · 10-04-2015, 04:11 AM

Hi all,

Never sure where to start with intro's!
Ive enjoyed many years working with rotary engines going back to the mid 90's when I first worked as a development engineer for a company in the UK that used to be Norton Motorbikes. We developed these engines for non automotive applications.

I'm still working on them to this day (but for a different company) based in Lichfield UK.

We are working with a UK company (Westfield) to get a new rotary car up and running next year, so exciting times!!

Personally I'm looking at buying a project car - would love an RX7 but seem very expensive so will probably go RX8.

Rotary Car Club looks great so really looking forward to finding out what I need to do to get a decent Hillclimb car built!! Probably lots of late nights in the garage I expect!!

Cheers,

Andy T

Fendamonky · 10-04-2015, 09:00 AM

Welcome Andy

GySgtFrank · 10-04-2015, 09:08 AM

... or you could go the engine swap route. Lots of great lightweight British cars that would benefit from a rotary heart transplant. I see a lot of MG Midgets, and others, getting Rover K series transplants over there, but almost never a rotary engine. These swaps seem to be mostly done here in North America or by some of the more deranged Aussies.

Either way, welcome and pictures are always good. We are a rather simple minded bunch.

speedjunkie · 10-05-2015, 02:13 AM

Welcome! I'm interested in the new rotary car you're talking about.

andyct355 · 09-24-2016, 08:19 PM

Hi,
Quick update on the rotary sports car I mentioned last year, the new engine has entered development phase now.

http://www.foxnews.com/auto/2016/09/...-revealed.html

Cheers

speedjunkie · 09-27-2016, 01:17 AM

That's awesome!

10-04-2015, 04:11 AM	#1
andyct355 The Newbie Join Date: Dec 2014 Location: UK, West Midlands iTrader: (0) Posts: 3 Rep Power: 0	Andy T from Midlands UK Hi all, Never sure where to start with intro's! Ive enjoyed many years working with rotary engines going back to the mid 90's when I first worked as a development engineer for a company in the UK that used to be Norton Motorbikes. We developed these engines for non automotive applications. I'm still working on them to this day (but for a different company) based in Lichfield UK. We are working with a UK company (Westfield) to get a new rotary car up and running next year, so exciting times!! Personally I'm looking at buying a project car - would love an RX7 but seem very expensive so will probably go RX8. Rotary Car Club looks great so really looking forward to finding out what I need to do to get a decent Hillclimb car built!! Probably lots of late nights in the garage I expect!! Cheers, Andy T

10-04-2015, 09:08 AM	#3
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. iTrader: (0) Posts: 1,005 Rep Power: 15	... or you could go the engine swap route. Lots of great lightweight British cars that would benefit from a rotary heart transplant. I see a lot of MG Midgets, and others, getting Rover K series transplants over there, but almost never a rotary engine. These swaps seem to be mostly done here in North America or by some of the more deranged Aussies. Either way, welcome and pictures are always good. We are a rather simple minded bunch. __________________ 1979 SA22C (parts of one anyway) http://rotarycarclub.com/rotary_foru...ad.php?t=15585 1975 MG Midget (building) http://rotarycarclub.com/rotary_foru...ad.php?t=18681 1988 N/A SE model FC, dead stock and less than 85k on the clock. This one actually runs, so I don't fuck with it.

09-24-2016, 08:19 PM	#5
andyct355 The Newbie Join Date: Dec 2014 Location: UK, West Midlands iTrader: (0) Posts: 3 Rep Power: 0	Rotary sports car Hi, Quick update on the rotary sports car I mentioned last year, the new engine has entered development phase now. http://www.foxnews.com/auto/2016/09/...-revealed.html Cheers

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-05-2015, 02:13 AM	#4
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	Welcome! I'm interested in the new rotary car you're talking about.

09-27-2016, 01:17 AM	#6
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	That's awesome!