|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
Thread Tools | Display Modes |
|
01-31-2014, 08:50 AM | #1 |
Respecognize!
|
S4 power steering w/o ecu controls...
So i have an S4 engine and subframe, steering blah blah in the FB. And frankly I know i only need one of the outlets from the pump (the main one) for the rack to work. And since i have no ecu to drive the variable motor on the pump, I was looking at eliminating it.
Any attempts at this? Looks some what straight forward. Just plug the reservoir port for the motor bypass as well as the feed off the main line.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
01-31-2014, 09:53 AM | #2 |
Test Whore - Admin
|
Run an S5 pump and run the single wire to ign hot.... is what I would do
In the convertible, for a variety of reasons, it's an FD pump, which operate in the same manner as the S5.
__________________
-The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. -Angry Motherf*cker Mode ENGAGED- |
01-31-2014, 01:13 PM | #3 |
RCC Addict
|
Yeah, that's basically what an RPM-dependent power steering is basically is.
That extra fitting / line is just for the power steering computer to bleed off pressure / fluid off the rack, taking to account engine RPM and vehicle speed. Removing those components just defaults back to the other, more available PS system. Can't you just find an S4 RPM-dependent PS pump? -Ted |