Wiring harness routing?

jahjahsqc · 11-16-2013, 08:11 PM

Does anyone have any good pictures or diagrams of how the wiring harness from either side is routed across the engine? I've got an 87 turbo

I've got my motor all back together, but can't quite figure out where everything plugs up to. I've got a lot of stuff removed so I know I'll have some thing I won't need.

Or if anyone is near North East Georgia and I can come look at your car... that'd be awsome too!

I just gotta plug up the wires and fill the fluid and it should be good to go!

banzaitoyota · 11-16-2013, 08:30 PM

http://foxed.ca/index.php?page=rx7manual

jahjahsqc · 11-16-2013, 09:48 PM

I own a year specific manual, thank you. The pictures in it are great if you know where things already go. Sadly, I do not. I'm hoping for something better than the the black and white cartoons of an EWD.

Rotary Evolution · 11-18-2013, 02:21 PM

it runs up by the thermostat housing, behind the alternator, to the inside of the oil filler neck around the driver side of the engine and terminates at the rear of the lower intake manifold.

all the connectors should be in their appropriate locations with that routing, the rats nest goes on after the harness is loosely laid out and connected afterwards.

11-16-2013, 08:11 PM	#1
jahjahsqc Rotary Fan in Training Join Date: Sep 2013 Location: Winder, Ga iTrader: (0) Posts: 42 Rep Power: 0	Wiring harness routing? Does anyone have any good pictures or diagrams of how the wiring harness from either side is routed across the engine? I've got an 87 turbo I've got my motor all back together, but can't quite figure out where everything plugs up to. I've got a lot of stuff removed so I know I'll have some thing I won't need. Or if anyone is near North East Georgia and I can come look at your car... that'd be awsome too! I just gotta plug up the wires and fill the fluid and it should be good to go!

11-16-2013, 08:30 PM	#2
banzaitoyota Rotary Fanatic Join Date: Feb 2008 iTrader: (0) Posts: 201 Rep Power: 17	http://foxed.ca/index.php?page=rx7manual __________________ My deuce

11-18-2013, 02:21 PM	#4
Rotary Evolution rotaryevolution.net Join Date: Feb 2011 Location: Las Vegas, NV iTrader: (0) Posts: 248 Rep Power: 14	it runs up by the thermostat housing, behind the alternator, to the inside of the oil filler neck around the driver side of the engine and terminates at the rear of the lower intake manifold. all the connectors should be in their appropriate locations with that routing, the rats nest goes on after the harness is loosely laid out and connected afterwards. __________________ http://rotaryevolution.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-16-2013, 09:48 PM	#3
jahjahsqc Rotary Fan in Training Join Date: Sep 2013 Location: Winder, Ga iTrader: (0) Posts: 42 Rep Power: 0	I own a year specific manual, thank you. The pictures in it are great if you know where things already go. Sadly, I do not. I'm hoping for something better than the the black and white cartoons of an EWD.