Parting out two stock 13B-REW engines

Nick SA · 11-04-2013, 10:10 PM

Hi Club,

I just acquired two complete 13B-REW engines. My intention is to keep the rotors and housings but absolutely everything else is up for grabs. One is a USDM engine and the other is a JDM engine.

If you need any random parts for your build then please send me your request and offer via pm. No reasonable offer will be refused!

Here is an itemized list of what I am parting out from both engines:

Primary and secondary rails with injectors: $100 for the set
UIM / LIM / Throttlebody: 75$ each or 175$ for all three
Flywheels: $40 each
Stock ECU: $60
Old engine harnesses, no cuts but old and dried out. Good if you want to cut it up and make something custom: 40$ each
Rats Nest: 20$ each
Stock twin turbos (minor lateral shaft play but working great when removed): $200
Exhaust manifolds: No cracks $50 each
FD Igniters: $25
Power Steering Pump: $75
AC Compressor: $75
Accessory bracket: $20 each
Set of FD coils with coil bracket: 50$

All other small parts, solenoids, etc. Will let these go for cheap.

I also have a mint (I really mean it.. 30k miles on these parts, not kidding) 12A rotating assembly: Rotors, shaft, front stack, gears all for $400
I have a recently rebuilt GSL third member with 3.90 gear. All bearings replaced and clutches measured to ensure they are within spec: $250

Please keep in mind that these parts will ship out from Quebec Canada. If you are interested in anything in particular send me a pm and I will send you pics of that part. Thanks!

chibikougan · 11-04-2013, 10:12 PM

Pics! Prices!

chibikougan · 11-04-2013, 10:14 PM

How much for complete intake from the TB to the motor?

Nick SA · 11-05-2013, 11:53 AM

Quote:

Originally Posted by chibikougan

How much for complete intake from the TB to the motor?

PM Sent and more info added to thread above! Thanks!

chibikougan · 11-05-2013, 12:19 PM

Thank you free bump.

rotarycrazy · 12-01-2013, 12:05 AM

pictures of the turbos to mindaugasvandys@gmail.com

silverfdturbo6port · 12-01-2013, 02:12 AM

pm'd

Nick SA · 12-01-2013, 12:44 PM

Thanks for the interest! PM's and emails replied.

11-04-2013, 10:10 PM	#1
Nick SA The Newbie Join Date: Jul 2013 iTrader: (0) Posts: 16 Rep Power: 0	Parting out two stock 13B-REW engines Hi Club, I just acquired two complete 13B-REW engines. My intention is to keep the rotors and housings but absolutely everything else is up for grabs. One is a USDM engine and the other is a JDM engine. If you need any random parts for your build then please send me your request and offer via pm. No reasonable offer will be refused! Here is an itemized list of what I am parting out from both engines: Primary and secondary rails with injectors: $100 for the set UIM / LIM / Throttlebody: 75$ each or 175$ for all three Flywheels: $40 each Stock ECU: $60 Old engine harnesses, no cuts but old and dried out. Good if you want to cut it up and make something custom: 40$ each Rats Nest: 20$ each Stock twin turbos (minor lateral shaft play but working great when removed): $200 Exhaust manifolds: No cracks $50 each FD Igniters: $25 Power Steering Pump: $75 AC Compressor: $75 Accessory bracket: $20 each Set of FD coils with coil bracket: 50$ All other small parts, solenoids, etc. Will let these go for cheap. I also have a mint (I really mean it.. 30k miles on these parts, not kidding) 12A rotating assembly: Rotors, shaft, front stack, gears all for $400 I have a recently rebuilt GSL third member with 3.90 gear. All bearings replaced and clutches measured to ensure they are within spec: $250 Please keep in mind that these parts will ship out from Quebec Canada. If you are interested in anything in particular send me a pm and I will send you pics of that part. Thanks! Last edited by Nick SA; 11-05-2013 at 11:51 AM..

12-01-2013, 02:12 AM	#7
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane iTrader: (0) Posts: 79 Rep Power: 14	pm'd __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-01-2013, 12:05 AM	#6
rotarycrazy Rotary Fan in Training Join Date: Mar 2008 Location: Spartanburg SC. iTrader: (0) Posts: 70 Rep Power: 17	pictures of the turbos to mindaugasvandys@gmail.com

12-01-2013, 12:44 PM	#8
Nick SA The Newbie Join Date: Jul 2013 iTrader: (0) Posts: 16 Rep Power: 0	Thanks for the interest! PM's and emails replied.