Need help with some small gauge/electrical probs.

WankelsRevenge · 02-27-2013, 07:39 PM

I finally got me a FC, picked up a good condition 86 N/A a couple weeks ago. The thing runs fine except for a few small probs, most of which Im in the process of fixing myself. One big thing which I have no idea how to fix is electrical stuffs. The biggest thing Ive seen so far is my volt meter only works about half of the time, and sometimes if I try to drive it before its warmed up a bit it will stall out when shifting gears, and when I restart it the tach wont work. Does anyone know what could be causing this, or is it going to be a case of hunt down the associated wires and inspect them?
Ryan

StephenSheppard · 02-28-2013, 01:16 AM

That's pretty common, it's the actually cluster parts. You could go to teh junkyard and get another cluster and try swapping some individual gauges out to see if you can obtain some taht work correctly.

My5ABaby · 02-28-2013, 01:46 AM

My volt gauge has never worked right. I wouldn't worry about it unless it's accurate and your power is cutting out.

The tach is run off the trailing coils. If the tach isn't moving, then the trailing coils aren't firing.

As for the dying when shifting, it probably has some vacuum leaks or other idle issues that are being masked by the BAC. Unplug the BAC and see what happens at idle.

RETed · 02-28-2013, 05:12 AM

Don't worry about the dead tach...
It's a common "problem" with you keep killing the engine.
(I suspect it's a glitch in the stock ECU programming.)
If it really bugs you, just kill the engine and restart, and that should reset the tach the majority of the times.

-Ted

WankelsRevenge · 02-28-2013, 11:08 AM

Yeah it wasnt anything I was majorly worried about as long as there wasnt a deeper issue at hand. Plus this isnt my 1st 5speed car so the tach isnt really a necesity.

02-28-2013, 01:46 AM	#3
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	My volt gauge has never worked right. I wouldn't worry about it unless it's accurate and your power is cutting out. The tach is run off the trailing coils. If the tach isn't moving, then the trailing coils aren't firing. As for the dying when shifting, it probably has some vacuum leaks or other idle issues that are being masked by the BAC. Unplug the BAC and see what happens at idle. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-28-2013, 01:16 AM	#2
StephenSheppard Rotary Fan in Training Join Date: Nov 2012 iTrader: (0) Posts: 58 Rep Power: 13	That's pretty common, it's the actually cluster parts. You could go to teh junkyard and get another cluster and try swapping some individual gauges out to see if you can obtain some taht work correctly.