compatiblities

bgarroyo77 · 06-07-2012, 12:44 AM

guy,
I have a 1985 GSL-SE RX-7 and was wondering is their and compatible engine parts from gen2 and gen3s ,and if so what are they?

Thanks

t_g_farrell · 06-07-2012, 07:58 AM

They are all 13B engines, so yes. Maybe you have something specific in mind? Hard to say
without a target.

cshaw07 · 06-18-2012, 08:41 AM

The gslse has the o rings in the housings where as the 2nd gen up has the o rings in the irons. you cant swap old school irons/housings with each other due to this.

dexspeed · 06-27-2012, 08:24 AM

Second generation transmissions will bolt up. There are other considerations that go along with that however.

lokirx706 · 06-30-2012, 11:56 PM

Brakes with the Respeed conversion kit, engine bay fuse boxes, transmissions, engines, leading ignition coil from the FC for 2GCDFIS... Heck you can swap the front suspension from the FC if you have some time, and well the ability to do it. The rear suspension from the FC can swap as well. Keep in mind FB's are a solid axle and FCs are IRS so you need ALOT of fabrication ability.

Other than engines, and transmissions, not alot is 'plug and play' but it can be made to work.

06-07-2012, 12:44 AM	#1
bgarroyo77 The Newbie Join Date: Jun 2012 iTrader: (0) Posts: 2 Rep Power: 0	compatiblities guy, I have a 1985 GSL-SE RX-7 and was wondering is their and compatible engine parts from gen2 and gen3s ,and if so what are they? Thanks

06-07-2012, 07:58 AM	#2
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	They are all 13B engines, so yes. Maybe you have something specific in mind? Hard to say without a target. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

06-30-2012, 11:56 PM	#5
lokirx706 Rotary Fan in Training Join Date: Apr 2010 Location: New Carlisle, OH iTrader: (0) Posts: 71 Rep Power: 15	Brakes with the Respeed conversion kit, engine bay fuse boxes, transmissions, engines, leading ignition coil from the FC for 2GCDFIS... Heck you can swap the front suspension from the FC if you have some time, and well the ability to do it. The rear suspension from the FC can swap as well. Keep in mind FB's are a solid axle and FCs are IRS so you need ALOT of fabrication ability. Other than engines, and transmissions, not alot is 'plug and play' but it can be made to work. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-18-2012, 08:41 AM	#3
cshaw07 The Newbie Join Date: May 2012 iTrader: (0) Posts: 12 Rep Power: 0	The gslse has the o rings in the housings where as the 2nd gen up has the o rings in the irons. you cant swap old school irons/housings with each other due to this.

06-27-2012, 08:24 AM	#4
dexspeed The Newbie Join Date: Nov 2011 Location: Ottawa, Ontario iTrader: (0) Posts: 14 Rep Power: 0	Second generation transmissions will bolt up. There are other considerations that go along with that however.