|
Tires,Wheels,Suspension,Brakes Info about Tires, Wheels, Suspensions, Brakes, etc. |
|
Thread Tools | Display Modes |
|
04-18-2012, 12:28 AM | #1 |
Rotary Fan in Training
|
1984 GSL-SE Caliper Questions
First, both the front and rear rotors are single piston, one side, YUCK, even the old English cars used at least two pistons. Any suggestions for better calipers?
Second, I was able to open up the front caliper wide enough for new pads but the rear caliper was a problem. I could not press the piston back, they do work so I know they are not stuck. I could not use new pads, had to put the old pads back in for now. Is there a trick or special tool for those rear calipers? |
04-18-2012, 04:01 AM | #2 |
Rotary Fanatic
|
The rear calipers have to be turned back in there is a couple small notches on the piston that a tool fits into and turned clockwise ( the tool is usually like a small block or sometimes a pair of needle nose pliers will work)
__________________
____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"... |
04-18-2012, 10:38 AM | #3 |
Rotary Fan in Training
|
DOH! Thanks, I was trying to press them back in.
|
04-25-2012, 12:14 PM | #5 |
Lifetime Rotorhead
|
^ To what he said, you can download a copy of the factory shop manual here: http://www.wright-here.net/cars/rx7/manuals.html
The 1984 & 1985 editions will have your GSL-SE model covered. |
05-03-2012, 03:13 PM | #6 | |
Rotary Fan in Training
|
Quote:
|
|