N/A to TII cuirse control??

Raksj04 · 04-03-2012, 07:06 AM

I have a 87 base with a S4 JDM swap, I have a US ECU and I am using the N/A harness with a turbo cuirse actutor. It doesn't work in any way, other then the lights coming on in the switch. The car had working cuirse before the swap. What am I missing? also I had to use a zip tie to hold the cable onto the thottle body. other wise it will slip off the holder.

RETed · 04-03-2012, 08:33 AM

Turbo versus non-turbo uses two different types of cruise control system.
The turbo one uses a linkage system, and I think the non-turbo uses a vacuum system?

Best bet is to try and get the non-turbo cruise control to work...
...but, I think the throttle bodies are backwards between the two, so rigging it is going to take some creativity.

-Ted

Pete_89T2 · 04-03-2012, 09:02 AM

Quote:

Originally Posted by RETed

Turbo versus non-turbo uses two different types of cruise control system.
The turbo one uses a linkage system, and I think the non-turbo uses a vacuum system?

Best bet is to try and get the non-turbo cruise control to work...
...but, I think the throttle bodies are backwards between the two, so rigging it is going to take some creativity.

-Ted

Is he trying to get this to work on a turbo or NA car? The turbo does uses an electric actuator to operate the throttle cable; not sure about the N/A, but if it is a vacuum actuator, I don't think it could be made to work on a turbo car - what would happen when you transition from vacuum to boost? And yeah, the linkage will be a PITA to get right.

JL1RX7 · 04-03-2012, 11:08 AM

NA is a vacuum system. If I recall correctly you can use the turbo's actuator in the NA system. The cable connecting the actuator and throttle body being the biggest difference after the actuators.

Raksj04 · 04-03-2012, 11:21 AM

I do have the Turbo actuator. So it should work right?

It is a N/A chassis and harness with a Turbo motor.

JL1RX7 · 04-03-2012, 11:26 AM

Hook it up and see. I know the FSM has a whole section on troubleshooting the system. Find that and it should help out a bunch with the lights and flashes on the switch.

Raksj04 · 04-03-2012, 05:25 PM

It is currently hooked up. By lights I mean the main and cuirse light.

JL1RX7 · 04-03-2012, 05:33 PM

Then you have power and everything. Did you take it on a drive and see if it works?

Raksj04 · 04-04-2012, 04:41 AM

Quote:

Originally Posted by JL1RX7

Then you have power and everything. Did you take it on a drive and see if it works?

I did. it doesn't work. unless the act is bad.

RETed · 04-04-2012, 05:23 AM

You cannot just swap the actuators and expect everything to work.

Since your car was originally non-turbo, you need to use the non-turbo actuator.
You need to somehow rig the non-turbo actuator to connect with the 13BT turbo throttle body.

-Ted

Raksj04 · 04-04-2012, 01:29 PM

I have been reading conflicting things. I 1st read that The N/A one with not work will my turbo ECU, that is the reason I bought this one.

04-03-2012, 07:06 AM	#1
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	N/A to TII cuirse control?? I have a 87 base with a S4 JDM swap, I have a US ECU and I am using the N/A harness with a turbo cuirse actutor. It doesn't work in any way, other then the lights coming on in the switch. The car had working cuirse before the swap. What am I missing? also I had to use a zip tie to hold the cable onto the thottle body. other wise it will slip off the holder.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-03-2012, 11:08 AM	#4
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA iTrader: (1) Posts: 487 Rep Power: 17	NA is a vacuum system. If I recall correctly you can use the turbo's actuator in the NA system. The cable connecting the actuator and throttle body being the biggest difference after the actuators.

04-03-2012, 11:21 AM	#5
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	I do have the Turbo actuator. So it should work right? It is a N/A chassis and harness with a Turbo motor.

04-03-2012, 11:26 AM	#6
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA iTrader: (1) Posts: 487 Rep Power: 17	Hook it up and see. I know the FSM has a whole section on troubleshooting the system. Find that and it should help out a bunch with the lights and flashes on the switch.

04-03-2012, 05:25 PM	#7
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	It is currently hooked up. By lights I mean the main and cuirse light.

04-03-2012, 05:33 PM	#8
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA iTrader: (1) Posts: 487 Rep Power: 17	Then you have power and everything. Did you take it on a drive and see if it works?

04-04-2012, 01:29 PM	#11
Raksj04 I have Ultra power in me. Join Date: Sep 2011 iTrader: (2) Posts: 457 Rep Power: 14	I have been reading conflicting things. I 1st read that The N/A one with not work will my turbo ECU, that is the reason I bought this one.