Compression test

dabranco · 11-18-2011, 01:30 AM

Finally got to do a compression test on 2 of the spark plugs port before the tester failed. Anyway here is what I got:
Front rotor top plug: 95PSI max and drops to 0
Rear rotor top plug: 90PSI max holds steady
I will get a new tester and test the bottom 2 plugs tomorrow.

Also does a 12A have an electric pump, if so I know it is hard wired into my headlight switch. and my carb fills with gas as it doesn't shut off so I get to play find WTF the previous owners did.

racer0954 · 11-18-2011, 08:03 AM

Hi new here about the carb a few thing that can OVERFILLED a carb 1) high pressure pump ( higher than the carb was design to handle) 2) flow bowl not closing fuel valve

11-18-2011, 01:30 AM	#1
dabranco Rotary Fan in Training Join Date: Nov 2011 iTrader: (1) Posts: 47 Rep Power: 0	Compression test Finally got to do a compression test on 2 of the spark plugs port before the tester failed. Anyway here is what I got: Front rotor top plug: 95PSI max and drops to 0 Rear rotor top plug: 90PSI max holds steady I will get a new tester and test the bottom 2 plugs tomorrow. Also does a 12A have an electric pump, if so I know it is hard wired into my headlight switch. and my carb fills with gas as it doesn't shut off so I get to play find WTF the previous owners did.

11-18-2011, 08:03 AM	#2
racer0954 The Newbie Join Date: Nov 2011 Location: ORLANDO iTrader: (0) Posts: 3 Rep Power: 0	problem carb Hi new here about the carb a few thing that can OVERFILLED a carb 1) high pressure pump ( higher than the carb was design to handle) 2) flow bowl not closing fuel valve

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode