What underpan are you running with FMIC

Proxy One · 04-01-2008, 01:50 PM

I am just seeing what people are running for a underpan with FMIC. I have a Blitz FMIC and I tried to test fit the stock underpan last night, well look like it wont fit due to the radiator being too low. Any suggestions?

l8r

DMoneyRx-7 · 04-01-2008, 02:28 PM

you are supposed to cut and trim the stock undertray for it to fit.

***Herblenny*** · 04-01-2008, 07:32 PM

try 99 under tray

Proxy One · 04-01-2008, 07:43 PM

Well i have both the 94 and the 99+ underpan so if I cut one up im gonna start with the 94 pan since im not doing the 99 bumper till later this month more than likely. I figured this is pretty much what Id have to do just cut the stock one up a bit.

l8r

albertomg · 04-03-2008, 05:52 PM

too low? you sure you got everything mounted correctly?

goodfella is running that same IC and i believe he is running the stock undertray.

Proxy One · 04-03-2008, 10:35 PM

Ill look at it again but its pretty tight with the new brackets on the radiator.

cewrx7r1 · 04-03-2008, 11:32 PM

You have to remove the piece rivited to the main body.

04-01-2008, 01:50 PM	#1
Proxy One Victory Is Mine Join Date: Feb 2008 Location: Suwanee GA iTrader: (0) Posts: 428 Rep Power: 17	What underpan are you running with FMIC I am just seeing what people are running for a underpan with FMIC. I have a Blitz FMIC and I tried to test fit the stock underpan last night, well look like it wont fit due to the radiator being too low. Any suggestions? l8r __________________ www.dealsgaprotaryrally.com 1994 Rx7 White 2001 RZ GT35R'd 1972 Rx2 Orange Coupe 5spd 2006 STi 1986 Buick GN

04-01-2008, 07:32 PM	#3
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	try 99 under tray __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

04-01-2008, 07:43 PM	#4
Proxy One Victory Is Mine Join Date: Feb 2008 Location: Suwanee GA iTrader: (0) Posts: 428 Rep Power: 17	Well i have both the 94 and the 99+ underpan so if I cut one up im gonna start with the 94 pan since im not doing the 99 bumper till later this month more than likely. I figured this is pretty much what Id have to do just cut the stock one up a bit. l8r __________________ www.dealsgaprotaryrally.com 1994 Rx7 White 2001 RZ GT35R'd 1972 Rx2 Orange Coupe 5spd 2006 STi 1986 Buick GN

04-03-2008, 10:35 PM	#6
Proxy One Victory Is Mine Join Date: Feb 2008 Location: Suwanee GA iTrader: (0) Posts: 428 Rep Power: 17	Ill look at it again but its pretty tight with the new brackets on the radiator. __________________ www.dealsgaprotaryrally.com 1994 Rx7 White 2001 RZ GT35R'd 1972 Rx2 Orange Coupe 5spd 2006 STi 1986 Buick GN

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-01-2008, 02:28 PM	#2
DMoneyRx-7 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 9 Rep Power: 0	you are supposed to cut and trim the stock undertray for it to fit.

04-03-2008, 05:52 PM	#5
albertomg Rotary Fan in Training Join Date: Feb 2008 Location: Bay Area CA iTrader: (0) Posts: 91 Rep Power: 17	too low? you sure you got everything mounted correctly? goodfella is running that same IC and i believe he is running the stock undertray.

04-03-2008, 11:32 PM	#7
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	You have to remove the piece rivited to the main body.