Neutral Switch MTX

tweiss3 · 05-21-2011, 09:16 AM

How important its it? Mine just broke all the wires off of it reinstalling it, do i need to worry about it, or should i try to repair it?

Boosted FC · 05-21-2011, 08:15 PM

Where the hell is the facepalm smiley? Damn Tom......lol

***TitaniumTT*** · 05-21-2011, 08:24 PM

Stock ECU reads it.

OD switch is also read by the stocker ECU....

Stock ECU's suck

I use mine for start in gear protection and for my remote start

Prodigy · 05-22-2011, 12:24 AM

I can't remember if FD's have this as well, if so that would work great with a remote start, yes I do realize this is the 2nd gen section...

J.

***TitaniumTT*** · 05-22-2011, 07:26 AM

Quote:

Originally Posted by Prodigy

I can't remember if FD's have this as well, if so that would work great with a remote start, yes I do realize this is the 2nd gen section...

J.

Test the switch well...
I used it as the gnd for a relay that allows power to pass through it for ththe remote start

Prodigy · 05-22-2011, 01:32 PM

Quote:

Originally Posted by TitaniumTT

Test the switch well...
I used it as the gnd for a relay that allows power to pass through it for ththe remote start

Thats exactly what I would want it for... I want that new alarm the 'drone' I think it's called.... Everything is done via internet/SMS and you can track your cars local by GPS too.... But I did not want to put in one if I could not use a neutral safety switch easily.... Thank Goodness Mazda has a habit of over engineering some things :P

J.

tweiss3 · 05-22-2011, 06:21 AM

I guess I will try to repair it then

***TitaniumTT*** · 05-22-2011, 07:25 AM

last one I bought was like $30..... just saying, some things ain't worth the aggrevation

tweiss3 · 05-22-2011, 07:48 AM

30 bucks aint bad, hopefully the local dealer has one in stock

***TitaniumTT*** · 05-22-2011, 08:20 AM

Does Ray manage your dealers parts dept?

tweiss3 · 05-23-2011, 07:15 AM

alright, what the fuck does the ecu read it for? I think im going to try to "repair" it tonight, and hope i can make it work. I called 3 dealers this morning and the earliest they could get it would be next week, which is too far away.

FRED · 05-23-2011, 07:39 AM

To let the ECU know that your in gear so it can anticipate the car being driven.

It's timing related and idle speed control (BAC) and deceleration control (fuel cut) related among other things. See manual.

Mazda isn't special in having a neutral switch.

tweiss3 · 05-23-2011, 07:51 AM

So, the switch is open when its in gear, and closed when it is in neutral? so in leaving the switch alone not plugged in, it always thinks its in gear, right, so there really shouldn't be any harm in just leaving it?

***TitaniumTT*** · 05-23-2011, 07:53 AM

Idle and afr's might be a little wonky

As much as I don't like them.... MT might have one in stock, as much as I LIKE him, Ray should have one in stock as well

tweiss3 · 05-23-2011, 08:03 AM

MT?

05-21-2011, 09:16 AM	#1
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	Neutral Switch MTX How important its it? Mine just broke all the wires off of it reinstalling it, do i need to worry about it, or should i try to repair it? __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

05-21-2011, 08:15 PM	#2
Boosted FC Rotary & Boost Addict Join Date: Feb 2008 Location: Dallas, Ga iTrader: (0) Posts: 203 Rep Power: 17	Where the hell is the facepalm smiley? Damn Tom......lol __________________ '05 Copper 6s, '87 TII RX7...248whp & 224wtq @ 12lbs

05-21-2011, 08:24 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Stock ECU reads it. OD switch is also read by the stocker ECU.... Stock ECU's suck I use mine for start in gear protection and for my remote start __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-22-2011, 06:21 AM	#7
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	I guess I will try to repair it then __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

05-22-2011, 07:25 AM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	last one I bought was like $30..... just saying, some things ain't worth the aggrevation __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-22-2011, 07:48 AM	#9
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	30 bucks aint bad, hopefully the local dealer has one in stock __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

05-22-2011, 08:20 AM	#10
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Does Ray manage your dealers parts dept? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-23-2011, 07:15 AM	#11
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	alright, what the fuck does the ecu read it for? I think im going to try to "repair" it tonight, and hope i can make it work. I called 3 dealers this morning and the earliest they could get it would be next week, which is too far away. __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

05-23-2011, 07:39 AM	#12
FRED Rotary Fan in Training Join Date: Mar 2011 iTrader: (0) Posts: 73 Rep Power: 14	To let the ECU know that your in gear so it can anticipate the car being driven. It's timing related and idle speed control (BAC) and deceleration control (fuel cut) related among other things. See manual. Mazda isn't special in having a neutral switch.

05-23-2011, 07:51 AM	#13
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	So, the switch is open when its in gear, and closed when it is in neutral? so in leaving the switch alone not plugged in, it always thinks its in gear, right, so there really shouldn't be any harm in just leaving it? __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

05-23-2011, 07:53 AM	#14
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Idle and afr's might be a little wonky As much as I don't like them.... MT might have one in stock, as much as I LIKE him, Ray should have one in stock as well __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-23-2011, 08:03 AM	#15
tweiss3 Mazda Lover Join Date: Aug 2010 Location: Akron, Ohio iTrader: (0) Posts: 319 Rep Power: 15	MT? __________________ 2004 Mazda6 V6 5-spd - still waiting on money for a motor 1991 Mazda RX7 NA 5-spd - my new DD with 145,000 miles

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode