Posi-lock Connectors

Force13b · 03-24-2011, 10:04 AM

Wasn't sure what section to put this in. Anyone ever seen or used these before. Crimps that you don't have to crimp
http://www.amazon.com/Posi-lock-Conn.../dp/B00389O50G

lt1_fd3s · 03-24-2011, 10:58 AM

i have heard about them... but i have not tried any yet... i do have some wiring i'm doing soon, so i may have to get some and chime back in after that...

***TitaniumTT*** · 03-24-2011, 12:23 PM

Crimps that you don't have to crimp sound the mythical virgin birth... buy the right tools/connectors and stop going for things that are meant for ameatuers without the reasons to buy proper tools.

OH... and get the f*ck down to DHS before I drag you down

Force13b · 03-24-2011, 12:55 PM

Quote:

Originally Posted by TitaniumTT

Crimps that you don't have to crimp sound the mythical virgin birth... buy the right tools/connectors and stop going for things that are meant for ameatuers without the reasons to buy proper tools.

OH... and get the f*ck down to DHS before I drag you down

I was wondering if anyone had tried them. It might be shit but you'll never know tell you try it.

I wish i could, i will be working this weekend in order to cover the negative time off i have so i can leave for my friends wedding on Wednesday night.

edit: Shouldn't you be working Glenn really needs to start cracking the whip.

***TitaniumTT*** · 03-24-2011, 02:20 PM

Don't you worry about the whip... you'll get yours soon enough

GreyGT-C · 03-24-2011, 11:17 PM

used them once.. didn't like them. I solder and heatshrink everything now instead.

***TitaniumTT*** · 03-24-2011, 11:27 PM

Crimping and heatshrinking would be the best way to go.

TheDriver216 · 03-25-2011, 05:34 PM

i use to use them for wiring my radio up... i used to buy a different one everyfew months and it made it less a pain in the ass to change them, i have not used them for any "real" electrical uses, but they worked for me.

vex · 03-25-2011, 06:01 PM

I would love to see duetch crimp connectors

but that might be a little much.

speedjunkie · 03-26-2011, 03:29 AM

I've used them and I love them, but I never really used them for anything other than stereo stuff I don't believe. They're awesome for when you keep having to swap stuff out, like TheDriver216 said with his stereo. Wal-Mart used to sell them years ago but they stopped carrying them shortly after. I never had any problems with them though.

They're also great for testing to make sure something works the way you have it wired before going through the trouble of ACTUALLY crimping or soldering.

I still want to get a whole box of these in all different sizes lol.

RETed · 03-26-2011, 05:26 AM

I remember when they first came out a few years ago...
The manufacturer was touting them as "crimping without requiring a special crimping tool".
Already the red flags went up...
These were nothing more than field splices that you could use in case of emergencies.
I don't care too much for them cause they are bulkier than a proper inline butt crimp connector.
(Who uses those things rather than run the proper length of wire in the first place anyways???)

-Ted

***TitaniumTT*** · 03-26-2011, 12:48 PM

I think I use the step-up/down butt crimps more than the standard butsplice crimps.

JustJeff · 03-26-2011, 01:32 PM

I'm a fan of soldier and shrink tubing

***TitaniumTT*** · 03-26-2011, 04:14 PM

I'm a fan of our soldiers too. But I hate soldering. I will never solder anything other than a board again

03-24-2011, 10:04 AM	#1
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 iTrader: (1) Posts: 315 Rep Power: 16	Posi-lock Connectors Wasn't sure what section to put this in. Anyone ever seen or used these before. Crimps that you don't have to crimp http://www.amazon.com/Posi-lock-Conn.../dp/B00389O50G

03-24-2011, 10:58 AM	#2
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC iTrader: (3) Posts: 780 Rep Power: 17	i have heard about them... but i have not tried any yet... i do have some wiring i'm doing soon, so i may have to get some and chime back in after that... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-24-2011, 12:23 PM	#3
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Crimps that you don't have to crimp sound the mythical virgin birth... buy the right tools/connectors and stop going for things that are meant for ameatuers without the reasons to buy proper tools. OH... and get the fck down to DHS before I drag you down __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck* with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-24-2011, 02:20 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Don't you worry about the whip... you'll get yours soon enough __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-24-2011, 11:27 PM	#7
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	Crimping and heatshrinking would be the best way to go. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-24-2011, 11:17 PM	#6
GreyGT-C The Newbie Join Date: Jan 2011 iTrader: (0) Posts: 10 Rep Power: 0	used them once.. didn't like them. I solder and heatshrink everything now instead.

03-25-2011, 05:34 PM	#8
TheDriver216 Rotary Fanatic Join Date: Feb 2008 Location: Cleveland, Ohio iTrader: (1) Posts: 159 Rep Power: 17	i use to use them for wiring my radio up... i used to buy a different one everyfew months and it made it less a pain in the ass to change them, i have not used them for any "real" electrical uses, but they worked for me.

03-25-2011, 06:01 PM	#9
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	I would love to see duetch crimp connectors but that might be a little much. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-26-2011, 03:29 AM	#10
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	I've used them and I love them, but I never really used them for anything other than stereo stuff I don't believe. They're awesome for when you keep having to swap stuff out, like TheDriver216 said with his stereo. Wal-Mart used to sell them years ago but they stopped carrying them shortly after. I never had any problems with them though. They're also great for testing to make sure something works the way you have it wired before going through the trouble of ACTUALLY crimping or soldering. I still want to get a whole box of these in all different sizes lol.

03-26-2011, 12:48 PM	#12
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I think I use the step-up/down butt crimps more than the standard butsplice crimps. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-26-2011, 01:32 PM	#13
JustJeff RCC Contributor Join Date: Mar 2008 iTrader: (1) Posts: 505 Rep Power: 17	I'm a fan of soldier and shrink tubing

03-26-2011, 04:14 PM	#14
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	I'm a fan of our soldiers too. But I hate soldering. I will never solder anything other than a board again __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode