New Year, Same Great Event, 20 days left!!!!! what's on your todo list?

***TitaniumTT*** · 01-01-2011, 03:41 PM

Lets here it! What are you you finishing up/bringing new this year? I'll start off with like 1/4 of my list
1) Repair/Repaint front bumper, hood, both doors, rear bumper :scratch:
2) Finish up the traction control
3) New Gaskets for the Fuel Cell
4) BellyPan
5) 6-spd!

reddozen · 01-01-2011, 04:34 PM

1) Finish the damn DGRR XI registration pages...
2) Get my bridge port in the car

mazdadude7 · 01-01-2011, 10:22 PM

finish prep work on the car and paint it then put it back together.

2gslse · 01-01-2011, 10:45 PM

change oil, check air in tires,roll fenders and maybe retune the power FC its been 3 or 4 yrs.

djmtsu · 01-03-2011, 07:58 AM

1) Buy another RX-7
2) ???
3) Profit!

My5ABaby · 01-03-2011, 08:28 AM

1. Resolve to quit making such horrible decisions on New Years Eve.
2. Fix my fuel tank
3. Put in black manual seat belts
4. Track down and fix the drivetrain vibration
5. Fix my power steering
6. Fix my cigarette lighter (probably just unplugged or something)
7. Hook up my overhead lights
8. Bodywork/paint (probably won't happen)

speedjunkie · 01-04-2011, 12:32 AM

Quote:

Originally Posted by My5ABaby

6. Fix my cigarette lighter (probably just unplugged or something)

I had no power from mine a couple years ago and it was the socket itself. I had power to it and everything. Just a thought. Before that I never knew it could go bad haha.

1. possibly paint engine bay (but probably not)
2. possibly install ducting for the VMIC
3. hopefully new coil setup and reinstall cruise control
4. possibly construct custom gauge pod setup/change gauges
5. get the front fenders modified to match the rear fenders
6. ss braided lines and reroute for water injection
7. possibly move battery again this time to storage bin behind passenger seat
8. help roommates get their FDs running/finished so they can go too

I just finished a bunch of projects so I want to drive it again and I don't want to take any chances on it not being ready by April. I haven't been to DGRR since '06 and I'm dying to go again.

My5ABaby · 01-04-2011, 09:02 AM

Quote:

Originally Posted by speedjunkie

I had no power from mine a couple years ago and it was the socket itself. I had power to it and everything. Just a thought. Before that I never knew it could go bad haha.

It works eventually if I mess with whatever I plug in enough. Not sure what all is up with that but I'll test it out.

speedjunkie · 01-05-2011, 01:09 AM

Quote:

Originally Posted by My5ABaby

It works eventually if I mess with whatever I plug in enough. Not sure what all is up with that but I'll test it out.

It's almost like it just has corrosion in there or something.

9. I also forgot I want to get some strut bar spacers made so I can get rid of the washers.

***TitaniumTT*** · 01-05-2011, 07:27 AM

Quote:

Originally Posted by mazdadude7

finish prep work on the car and paint it then put it back together.

Been there, good luck.

Quote:

Originally Posted by My5ABaby

6. Fix my cigarette lighter (probably just unplugged or something)

Quote:

Originally Posted by speedjunkie

It's almost like it just has corrosion in there or something.

I had the same problem on mine while on the epic road adventure. It wasn't un-plugged, it was just plain worn out. Sucked, on day 2 I was in the parking lot of a wal-mart tearing the dash apart so I could wire in a external plug to charge my phone. I guess I should mount and more permanently wire that thing, zip tie mounting isn't really my thing

Quote:

Originally Posted by speedjunkie

9. I also forgot I want to get some strut bar spacers made so I can get rid of the washers.

That'd be bitching. But you should be able to make that yourself no? Plate of AL, a sharpie, jigsaw, drill and a file and maybe an hr of time?

Kane · 01-03-2011, 09:14 AM

-Retune
-Replace Fuel Line and Adapter for FP Gauge
-New Tires, 275 Rear, 235 Front
-Annual Service, Diff, Tranny, Oil etc...

Waffles · 01-03-2011, 09:29 AM

1. Put the ported motor into the RX7
2. rebuild the 5speed tranny

orion84gsl · 01-03-2011, 07:17 PM

1. Remove stock perch on replacement front struts and weld on new perches. Swap coil over collars/springs/dampers/camber plates over to new struts.
2. Install new front brake rotors and wheel bearings.
3. Install MSD 6A and 2 Jacobs coils.
4. Mount wheels and tires
5. Alignment
6. Tune the carb/set timing. Hopefully some dyno time before DGRR, but probably not.
7. Install louvers on hood and repaint.
8. Reinstall 3-point strut brace.
9. A good engine bay degreasing and interior cleaning.

N.RotaryTech · 01-03-2011, 08:32 PM

1. Put motor back together & put it back in car.
2. Swap diff with a lsd diff.
3. Swap auto seat belts with manual belts.
4. Repair & paint hood vent.
5. Replace tires with better tires.
6. Aaand maybe something else.

IH8DSM · 01-04-2011, 12:50 AM

To much stuff

1. Order and install coilover set up
2. Order and install wheels and fender flares
3. Replace fuel filter
4. Double check all new and old parts

Hopefully I will have it all done way before the gap hopefully be the keyword

01-01-2011, 03:41 PM	#1
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son iTrader: (4) Posts: 4,581 Rep Power: 10	New Year, Same Great Event, 20 days left!!!!! what's on your todo list? Lets here it! What are you you finishing up/bringing new this year? I'll start off with like 1/4 of my list 1) Repair/Repaint front bumper, hood, both doors, rear bumper :scratch: 2) Finish up the traction control 3) New Gaskets for the Fuel Cell 4) BellyPan 5) 6-spd! __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-** Last edited by TitaniumTT; 04-09-2011 at 08:10 AM..

01-01-2011, 04:34 PM	#2
reddozen Gold Wheels FTW Join Date: Mar 2008 iTrader: (0) Posts: 744 Rep Power: 17	1) Finish the damn DGRR XI registration pages... 2) Get my bridge port in the car __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

01-01-2011, 10:45 PM	#4
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va iTrader: (0) Posts: 440 Rep Power: 17	change oil, check air in tires,roll fenders and maybe retune the power FC its been 3 or 4 yrs. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

01-03-2011, 07:58 AM	#5
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (10) Posts: 4,043 Rep Power: 21	1) Buy another RX-7 2) ??? 3) Profit! __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

01-03-2011, 08:28 AM	#6
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	1. Resolve to quit making such horrible decisions on New Years Eve. 2. Fix my fuel tank 3. Put in black manual seat belts 4. Track down and fix the drivetrain vibration 5. Fix my power steering 6. Fix my cigarette lighter (probably just unplugged or something) 7. Hook up my overhead lights 8. Bodywork/paint (probably won't happen) __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

01-01-2011, 10:22 PM	#3
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC iTrader: (5) Posts: 410 Rep Power: 17	finish prep work on the car and paint it then put it back together.

01-03-2011, 09:14 AM	#11
Kane All about the O2 Join Date: Sep 2008 iTrader: (0) Posts: 295 Rep Power: 17	-Retune -Replace Fuel Line and Adapter for FP Gauge -New Tires, 275 Rear, 235 Front -Annual Service, Diff, Tranny, Oil etc... __________________ My 2007 Turbocharged RX8

01-03-2011, 09:29 AM	#12
Waffles Rotary Fan in Training Join Date: Dec 2010 Location: St. Louis iTrader: (0) Posts: 55 Rep Power: 15	1. Put the ported motor into the RX7 2. rebuild the 5speed tranny

01-03-2011, 07:17 PM	#13
orion84gsl Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 167 Rep Power: 17	1. Remove stock perch on replacement front struts and weld on new perches. Swap coil over collars/springs/dampers/camber plates over to new struts. 2. Install new front brake rotors and wheel bearings. 3. Install MSD 6A and 2 Jacobs coils. 4. Mount wheels and tires 5. Alignment 6. Tune the carb/set timing. Hopefully some dyno time before DGRR, but probably not. 7. Install louvers on hood and repaint. 8. Reinstall 3-point strut brace. 9. A good engine bay degreasing and interior cleaning.

01-03-2011, 08:32 PM	#14
N.RotaryTech Home-brew Rotary Join Date: Feb 2008 Location: GooseCreek SC iTrader: (0) Posts: 552 Rep Power: 17	1. Put motor back together & put it back in car. 2. Swap diff with a lsd diff. 3. Swap auto seat belts with manual belts. 4. Repair & paint hood vent. 5. Replace tires with better tires. 6. Aaand maybe something else. __________________ '89 RX7 GTU, half-Bridge-port S4/S5 NA, E6K, Full RB exhaust, weekend warrior. '83 RX7, The "this might take awhile" project. '87 RX7 GXL, Rest In Pieces. '98 Subaru Impreza Outback-sport, rx7 rescue vehicle, down for repair. '94 Ford Ranger, daily.

01-04-2011, 12:50 AM	#15
IH8DSM RCC Contributor Join Date: Mar 2008 iTrader: (0) Posts: 610 Rep Power: 17	To much stuff 1. Order and install coilover set up 2. Order and install wheels and fender flares 3. Replace fuel filter 4. Double check all new and old parts Hopefully I will have it all done way before the gap hopefully be the keyword __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode