manifold question, please help!!

EastonH8 · 10-15-2010, 05:49 AM

Hi guys! So have a question, I was at junk yard a couple days ago looking for parts for my 86 n/a. Came across I believe a 85 12a that had racing beat header so i grabbed it. I know I have to do some modifications for it to fit, anyways I took my stock manifold off and noticed that the engine had the 2 main exhaust holes then a little port below. So if i was to get the racing beat header on is it safe to have that mini port (hole) covered by the rb header?

FC Zach · 10-15-2010, 07:13 AM

Mine is but I have removed all my emissions so in your case I wouldn't know for sure.

EastonH8 · 10-15-2010, 11:37 AM

Humm alright, I've looked at the RB header for the 86 and I didnt see that third port so.

NoDOHC · 10-15-2010, 08:39 PM

That port is used for air injection. You may need it to pass emissions, otherwise, it is unnecessary

EastonH8 · 10-15-2010, 10:53 PM

No emissions in my state so I'm golden, thanks for the help guys

EastonH8 · 10-15-2010, 11:02 PM

*in my city

NoDOHC · 10-17-2010, 02:58 PM

Wait! I just reread the above post... 12A engines are not as long as 13B engines, I am pretty sure the headers won't fit without some modifications. I misread the above post the first time. I thought the headers were on an 85 GSL (13B)

10-15-2010, 05:49 AM	#1
EastonH8 The Newbie Join Date: Oct 2010 iTrader: (0) Posts: 5 Rep Power: 0	manifold question, please help!! Hi guys! So have a question, I was at junk yard a couple days ago looking for parts for my 86 n/a. Came across I believe a 85 12a that had racing beat header so i grabbed it. I know I have to do some modifications for it to fit, anyways I took my stock manifold off and noticed that the engine had the 2 main exhaust holes then a little port below. So if i was to get the racing beat header on is it safe to have that mini port (hole) covered by the rb header?

10-15-2010, 07:13 AM	#2
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Mine is but I have removed all my emissions so in your case I wouldn't know for sure. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

10-15-2010, 08:39 PM	#4
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	That port is used for air injection. You may need it to pass emissions, otherwise, it is unnecessary __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

10-17-2010, 02:58 PM	#7
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin iTrader: (1) Posts: 855 Rep Power: 17	Wait! I just reread the above post... 12A engines are not as long as 13B engines, I am pretty sure the headers won't fit without some modifications. I misread the above post the first time. I thought the headers were on an 85 GSL (13B) __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-15-2010, 11:37 AM	#3
EastonH8 The Newbie Join Date: Oct 2010 iTrader: (0) Posts: 5 Rep Power: 0	Humm alright, I've looked at the RB header for the 86 and I didnt see that third port so.

10-15-2010, 10:53 PM	#5
EastonH8 The Newbie Join Date: Oct 2010 iTrader: (0) Posts: 5 Rep Power: 0	No emissions in my state so I'm golden, thanks for the help guys

10-15-2010, 11:02 PM	#6
EastonH8 The Newbie Join Date: Oct 2010 iTrader: (0) Posts: 5 Rep Power: 0	*in my city