Refered from the old club to the new one by Polito Racing

AlabamaGearHead · 03-25-2008, 06:37 PM

So I have been a member over there since June of 03. I had just gotten my first 7(85 gsl) and I figured id join a forum to help me learn a little about my new car. I learned a few things and met some pretty cool folks on there...only one in person though...but never really made friends with anyone where I felt like part of the group. But, never the less, I have been feeling like alot of the fun was gone from the site, but didnt really know of any other 7 forum that had enough traffic to keep me interested. And ive seen some of the guys(Kevin Landers for example) that I thought knew their stuff and really helped me, even though not directly,get constantly badgered over kinda stupid things. Anyway, I just drove up to NC over the weekend to bring my old 87 TII to Paul and he told me about the site so I figured id join. Looks good so far, and lookin foward to getting to know some more great people.

Jeremy

***ZGN*** · 03-25-2008, 06:46 PM

Glad to have you onboard!
Thanks for your support. Let's make this place #1!

AlabamaGearHead · 03-25-2008, 06:50 PM

Thanks man. Im glad to be here. Hopefully, the forum will grow like we all want it to.

Jeremy

MotoTek · 03-25-2008, 07:37 PM

Welcome.

AlabamaGearHead · 03-26-2008, 05:31 PM

Thanks Motec.

Phoenix7 · 03-26-2008, 05:45 PM

we got a noobie, let's JUMP HIM!!!!!!!!!!!!!!

welcome. This place looks and feels better already. Keep the members coming.

AlabamaGearHead · 03-27-2008, 06:47 PM

^

KaiFD3S · 03-29-2008, 12:49 PM

Welcome

Polito Racing · 04-03-2008, 10:31 AM

glad to see you here

AlabamaGearHead · 04-03-2008, 07:29 PM

Hey man. Thanks for the info about the forum.

So, in your sig, which of the 87 TIIs is my old one? The one under repairs or the project car?

Polito Racing · 04-03-2008, 07:41 PM

The one under repairs. It should be running by tomorow. I just dropped the engine on it all i need to do isto conect al the plugs and hoses, the intercooloer and the intake. ill let you know when I'm finished. I have a question. Who had previously rebuilt that engine? That engine had new apex seals and some other new crap on it. the reason it went was because instead of using a gasket set they used silicone and water got into the oil and it had a bearing failure. the rotor slamed against the iron and smashed the side seals into the grooves on the rear rotor. but everything else was intact. who ever rebuilt that engine had no clue on what he was doing. talk to you later. how is the white car working for you?

Phoenix7 · 04-03-2008, 07:43 PM

hey, Polito, where can I get 2 FCs like the one in your sig? I want a black one and a red one.

Polito Racing · 04-03-2008, 10:58 PM

copy mine and just edit it however you want on photobucket.

AlabamaGearHead · 04-04-2008, 06:36 PM

No Shit?? The guy I bought it from never said anything about it being rebuilt. I put new turbo and downpipe gaskets on it. And also the front oil seal. I also fabbed up the custom oil injector lines....came out pretty good I think. Everything else internally was all before me....what size apex seals were on it? Any major damage to the engine or rotors?
Later man.

O btw, I checked the alternator, its good. I think maybe the car being low on fuel could be causing the chugging. Ill be messing with it in the morning.
Jeremy

Polito Racing · 04-05-2008, 10:56 AM

nah everything is still reusable even the apex seals. the apex seals were Mazda 2mm ones I was able to pull out the stuck side seals and cleaned them out pretty good then tried whith other side seals i had laying arround and them weren't getting stuck anymore. now i have a question does the fuel pump in the black car have a kill switch? I finished the swap but the fuelpump isnt kicking in.

04-03-2008, 10:31 AM	#9
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC iTrader: (0) Posts: 87 Rep Power: 17	glad to see you here __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!)

04-03-2008, 07:41 PM	#11
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC iTrader: (0) Posts: 87 Rep Power: 17	The one under repairs. It should be running by tomorow. I just dropped the engine on it all i need to do isto conect al the plugs and hoses, the intercooloer and the intake. ill let you know when I'm finished. I have a question. Who had previously rebuilt that engine? That engine had new apex seals and some other new crap on it. the reason it went was because instead of using a gasket set they used silicone and water got into the oil and it had a bearing failure. the rotor slamed against the iron and smashed the side seals into the grooves on the rear rotor. but everything else was intact. who ever rebuilt that engine had no clue on what he was doing. talk to you later. how is the white car working for you? __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!)

04-03-2008, 10:58 PM	#13
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC iTrader: (0) Posts: 87 Rep Power: 17	copy mine and just edit it however you want on photobucket. __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!)

04-05-2008, 10:56 AM	#15
Polito Racing so you got pistons oh wow Join Date: Mar 2008 Location: Raeford NC iTrader: (0) Posts: 87 Rep Power: 17	nah everything is still reusable even the apex seals. the apex seals were Mazda 2mm ones I was able to pull out the stuck side seals and cleaned them out pretty good then tried whith other side seals i had laying arround and them weren't getting stuck anymore. now i have a question does the fuel pump in the black car have a kill switch? I finished the swap but the fuelpump isnt kicking in. __________________ Polito Racing 2000 F-350 SD (Daily Driver) 2002 CBR 954RR (Back on the Road) 1987 RX-7 Turbo II(red bullet!!) Last edited by Polito Racing; 04-05-2008 at 11:14 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-25-2008, 06:37 PM	#1
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	Refered from the old club to the new one by Polito Racing So I have been a member over there since June of 03. I had just gotten my first 7(85 gsl) and I figured id join a forum to help me learn a little about my new car. I learned a few things and met some pretty cool folks on there...only one in person though...but never really made friends with anyone where I felt like part of the group. But, never the less, I have been feeling like alot of the fun was gone from the site, but didnt really know of any other 7 forum that had enough traffic to keep me interested. And ive seen some of the guys(Kevin Landers for example) that I thought knew their stuff and really helped me, even though not directly,get constantly badgered over kinda stupid things. Anyway, I just drove up to NC over the weekend to bring my old 87 TII to Paul and he told me about the site so I figured id join. Looks good so far, and lookin foward to getting to know some more great people. Jeremy

03-25-2008, 06:46 PM	#2
*ZGN* I fly drones & film crap. Join Date: Jan 2008 Location: Birmingham, AL iTrader: (6) Posts: 2,262 Rep Power: 10	Glad to have you onboard! Thanks for your support. Let's make this place #1!

03-25-2008, 06:50 PM	#3
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	Thanks man. Im glad to be here. Hopefully, the forum will grow like we all want it to. Jeremy

03-25-2008, 07:37 PM	#4
MotoTek Always Under Construction Join Date: Mar 2008 Location: La Playa, CA iTrader: (1) Posts: 302 Rep Power: 17	Welcome.

03-26-2008, 05:31 PM	#5
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	Thanks Motec.

03-27-2008, 06:47 PM	#7
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	^

03-29-2008, 12:49 PM	#8
KaiFD3S Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 437 Rep Power: 17	Welcome

04-03-2008, 07:29 PM	#10
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	Hey man. Thanks for the info about the forum. So, in your sig, which of the 87 TIIs is my old one? The one under repairs or the project car?

04-04-2008, 06:36 PM	#14
AlabamaGearHead Rotary Fan in Training Join Date: Mar 2008 Location: New Brockton,AL. iTrader: (0) Posts: 31 Rep Power: 0	No Shit?? The guy I bought it from never said anything about it being rebuilt. I put new turbo and downpipe gaskets on it. And also the front oil seal. I also fabbed up the custom oil injector lines....came out pretty good I think. Everything else internally was all before me....what size apex seals were on it? Any major damage to the engine or rotors? Later man. O btw, I checked the alternator, its good. I think maybe the car being low on fuel could be causing the chugging. Ill be messing with it in the morning. Jeremy