Deals Gap -For sale thread

[fire85gslse]

Guys, here is a thread to post what you might have for sale that you can bring to the gap with you. This is a good time to clean out some space and help other rotorheads with shipping.

Post the items you have for sale that will fit in the car with you:

[vincentrx7]

I just bought a nice fender roller. I was thinking about bringing it and renting it out for $25 a car. Any interest?
I also have a RX7 store downpipe and a mid-pipe if anyone is interested.
I would like to buy a stock radio and a stock front lip. PM me.

[PortedRotorTuner]

Few Things I have. I'm At Work. So I might Add to this list tomorrow.

FC
88' 10Th Annv. Tail Lights $140
S4 Set Of Rotors in Good Condition $100 for the set
S4 Eccentric Shaft In Good Condition $50
S5 End and Center Plates $75 each

FD
re amemiya steering column gauge pod $80
Flyrx7 Center Speaker Gauge Pod. Never Used! Still wrapped. 52mm 4 pod $165
Stock Radiator about 2k miles on it $150
2 sets of stock twins. Set 1 in good condition. $150
Set 2 in very poor condition (bad cracks) $50
LIM (stock) $75
UIM (stock) $75

Non Car Things
Guitar Hero Drum Set and Guitar for Xbox 360 $40
PS2 Racing Wheel and pedals $15
Paintball Mask New Condition (I'll update later which one) $20
Paintball High Pressure tank New Condition $100
Paintball Gloves and Tournament Clothing New Condition$25

[djmtsu]

FC headlight assemblies
S5 rear wing (white)
Apexi N1 Evo Catback
Corbeau reclining seats
FC coils- leading and trailing
CAS
Autometer 60mm turbo boost gauge with pod and demister mount
S5 mirrors (white)
Logicon
Idiot cluster

[staticpat]

93 mb rx-7, $10k, interesting trades considered
:<

Also if anyone wants a poor man's HID kit, plug and play for the 3rd gen $5 http://rotarycarclub.com/rotary_foru...ad.php?t=10986

[My5ABaby]

WTB: FC passenger side window switch.

[FC Zach]

I need a L/S power mirror cover thingy for a 2nd gen. (the thing on the inside of the car that covers the nuts) I think it may be called a sail panel.

[N.RotaryTech]

I'm in need of shifter boots for an FC.
I need the inner rubber boot and the outer leather boot.
(I'm not sure what else to call them.)

[RoughRex]

Originally Posted by N.RotaryTech

I'm in need of shifter boots for an FC.
I need the inner rubber boot and the outer leather boot.
(I'm not sure what else to call them.)

I'll bring you the outer (S5 right?) I don't have the inner boots though. "New" leather replacement, bought the wrong Item as I have S4. It's been packed in a box for a couple of years so you might have to oil it up or something to get any wrinkles or creases out. $5

[N.RotaryTech]

Originally Posted by FC Zach

I need a L/S power mirror cover thingy for a 2nd gen. (the thing on the inside of the car that covers the nuts) I think it may be called a sail panel.

I have both left an right side ones, black in color.
Left side one is cracked in half though, sort of still intact, needs gluing.
Free.

Originally Posted by RoughRex

I'll bring you the outer (S5 right?) I don't have the inner boots though. "New" leather replacement, bought the wrong Item as I have S4. It's been packed in a box for a couple of years so you might have to oil it up or something to get any wrinkles or creases out. $5

Cool thanks.


BTW: I literally have a whole car of parts from a 87 gxl and 89 gtu.
So ask for anything an you shall receive, (unless I want to keep said part, and if said part will fit in my rx7).

[daleclark]

I'll be bringing my Viton check valves, I don't have many sets in stock, just re-ordered today but I won't get the new order in time for the trip. But, anyone at the event can buy at the hookup price of $10 for a set of 4 and I'll ship them out.

I'll be giving one set for raffling off as well .

I'll probably be digging through my stuff and bringing a few neat things for sale with me.

Dale

[N.RotaryTech]

Ive got one block I might be willing to let go.
Its in pieces, and not pretty.
Its an S5 n/a, coolant seal track failure.

Condition:
Front iron: (Inner track rust-through to coolant passage), some pitting on the face, I also practice ported on that iron, also with a practice bridge port.

Front housing: A little bit of flaking on inside edges, lots of pitting on the outside, oil injector hole stripped, mating surfaces pitted, exhaust sleeve removed, I ported it too.

Front Rotor: Pitting on most sides, side seals stuck in, one corner seal stuck in, bearing good.

Intermediate Iron: Some pitting on front face, rear face good, I did small chamfer/bevel porting on top edge of ports.

Rear housing: Lots of flaking on inside edges, not as badly pitted on outside, oil injector hole might be stripped, exhaust sleeve removed, stock port.

Rear Rotor: Good.
Rear housing: Good, stock ports.

Eccentric shaft: Good.
Ive got all the hardware an front end parts, oil pan too.
No flywheel.

I want to make a cheap experimental crappy motor out of it.
Its still in process, but not going to be finished any time soon.

So make me an offer I cant refuse.

[fire85gslse]

I have a ton of stuff for sale. Too much to list here so click this

http://rotarycarclub.com/rotary_foru...?t=5460&page=5

[Drama]

I`ll bring some Fc and Fd parts, I`ll post some tape on the back window of my car, Saying I have parts for sale.

[fire85gslse]

It would be really cool if there was an area that people could meet to buy/sell.
Our own Rotary Swap meet area, how cool would that be.