Coolant Temp Sensor Thread and Pitch

vex · 04-02-2010, 11:38 PM

Anyone know what the thread pitch is for the coolant temp sensor (the one that screws into the bottom of the radiator? Help would be greatly appreciated as I'm going to be buying some T-Fittings and what not for my new cooling system tomorrow (I guess that's this morning), and would like to only have to buy stuff once.

Pic from MazdaTrix for reference:

Thanks!

And consequently since it appears that this sensor is solely for the use of a cooling fan, could it possibly be retro fitted to an after market relay to control the E-Fan I'm going to install (rather than use the stupid push in temp probe that's built in on the adjustable thermostat/relay)?

vex · 04-05-2010, 11:05 PM

MazdaTrix says it's a Metric Pipe thread... Which narrows it down I guess?

Whizbang · 04-05-2010, 11:38 PM

im sure you could use it to activate a fan via a relay if you can choose when the relay opens.

FC3S · 04-12-2010, 06:05 AM

Clutch fan > e fan

vex · 04-12-2010, 07:37 AM

Quote:

Originally Posted by FC3S

Clutch fan > e fan

Doesn't help.

vex · 04-27-2010, 01:44 PM

What does this coolant sensor go to anyways? Does it go to the gauge, or somewhere else?

vex · 05-02-2010, 03:02 PM

It appears to be used in the activation of the AC....

04-02-2010, 11:38 PM	#1
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	Coolant Temp Sensor Thread and Pitch Anyone know what the thread pitch is for the coolant temp sensor (the one that screws into the bottom of the radiator? Help would be greatly appreciated as I'm going to be buying some T-Fittings and what not for my new cooling system tomorrow (I guess that's this morning), and would like to only have to buy stuff once. Pic from MazdaTrix for reference: Thanks! And consequently since it appears that this sensor is solely for the use of a cooling fan, could it possibly be retro fitted to an after market relay to control the E-Fan I'm going to install (rather than use the stupid push in temp probe that's built in on the adjustable thermostat/relay)? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group Last edited by vex; 04-02-2010 at 11:48 PM..

04-05-2010, 11:05 PM	#2
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	MazdaTrix says it's a Metric Pipe thread... Which narrows it down I guess? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-05-2010, 11:38 PM	#3
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	im sure you could use it to activate a fan via a relay if you can choose when the relay opens. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

04-27-2010, 01:44 PM	#6
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	What does this coolant sensor go to anyways? Does it go to the gauge, or somewhere else? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

05-02-2010, 03:02 PM	#7
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. iTrader: (6) Posts: 2,113 Rep Power: 19	It appears to be used in the activation of the AC.... __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

04-12-2010, 06:05 AM	#4
FC3S The Newbie Join Date: Apr 2010 iTrader: (0) Posts: 2 Rep Power: 0	Clutch fan > e fan

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode