Drivers Side Door Handle

bigzman · 03-16-2010, 10:48 AM

I have taken out the cylinder on the spare. Is there a trick to take the handle out of my 91 other that 1 bolt off with window down and the other up.
Any input would be appreciated as to any shortcuts to speed up the process. I am replacing it on Wed. I am a weekend mechanic

Thank You in Advance

classicauto · 03-16-2010, 01:13 PM

Only things holding it in are the two nuts, and the rods for the latch and lock cyl.

A tip would be making damn sure you open the clip on the handle for the latch rod properly. Use a small pick and open the "door" on it. Seen a few of them broken by "pros" lol

Make sure as well to take any slack out of the rods when you put the above clip back on. You'll notice the design allows some adjustment, just make sure its not super loose when you clip the clip back together.

bigzman · 03-17-2010, 06:28 AM

TY for the that info. Will do as you suggest.

03-16-2010, 10:48 AM	#1
bigzman The Newbie Join Date: Oct 2008 Location: Davie Fl. iTrader: (1) Posts: 8 Rep Power: 0	Drivers Side Door Handle I have taken out the cylinder on the spare. Is there a trick to take the handle out of my 91 other that 1 bolt off with window down and the other up. Any input would be appreciated as to any shortcuts to speed up the process. I am replacing it on Wed. I am a weekend mechanic Thank You in Advance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-17-2010, 06:28 AM	#3
bigzman The Newbie Join Date: Oct 2008 Location: Davie Fl. iTrader: (1) Posts: 8 Rep Power: 0	TY for the that info. Will do as you suggest.