SportTuner is here!

SportTuner.com · 02-06-2010, 03:26 PM

Hay Gang, I just wanted to take a moment and introduce myself to you all. I’m Anthony Bulger owner of SportTuner.com. Currently we’re working to get set up as a vendor on the forum here.

Several of you may already know me and some may not so let me give you some back ground on me and my rotary life.

Back in 1999 I along with Steve Kan, Tim Schulh, Stephen Edmundson started the DFW RX-7 Club. At that time I had my first 3rd Gen RX-7, however it wasn’t my first rotary car, I actually had been given a 1st gen with a bad motor several years before and at the time I was working for an exotics car shop in Dallas. We decided to gut the motor and drop in a 302 from a rolled mustang GT we had. The irony of this would come later but at this time Chris and Ari from Rotary Performance (RX7.com) where just starting out and we thought it would be fun to run it by and tease them about how to make a rotary car perform. Well the irony came when years later I would again be working alongside them (RX7.com) in the quest to dominate the NHRA Import racing scene with rotary powered cars. That year we finished 1st, 2nd, and 3rd place and soon the bug had bit me. I was asked to work with Ken Scheepers as Crew Chief for the next several years as he continued his racing career.

During those years I built up my 3rd Gen and was honored with a magazine article in the Japanese publication of RX-7 Enthusiast my car was referred to as “Texas Style”.

I finally took time away from the racing and worked to develop my business which I run now. Currently we service several of the most reputable tuners in the Rotary community, providing services all over the world. You may not know us by name but you have most likely seen or possibly own some of or products.

I’m hoping to be welcomed to your community and offer my years of experience and love of the rotary and the goal to obtain maximum performance. If I can be of any help please don’t hesitate to call or ask.

Viperx7 · 02-06-2010, 07:27 PM

Welcome to the Club.

dudemaaan · 02-07-2010, 02:54 PM

welcome to the forum

craig3x · 02-23-2010, 08:36 PM

know any tuners in sacramento?

SportTuner.com · 02-23-2010, 09:11 PM

Sorry, I can't seem to think of anybody off the top of my head located in the Sacromento area.

prrex4ever · 02-23-2010, 09:42 PM

I have to go check you out and get a couple of things powdercoated. I believe I met you at the last D/FW RX7 club meet.

SportTuner.com · 02-23-2010, 09:47 PM

Sure, just give me a call before you head out since I'm not always at the shop (817)401-6772.

Charlie Redden · 04-11-2010, 03:26 AM

I know I am a little late, but buy from Anthony with confidence! He has either polished or coated multiple pieces in my engine bay (at least eight pieces) and all have come out better than I could have expected.

Welcome to the forum Anthony.

Julian · 04-13-2012, 01:27 PM

Just a good word in for the great coating job that Anthony and SportTuner.com just did for me on LIU.UIM, intake pipes Y-Pipe and fuel rails.

02-06-2010, 03:26 PM	#1
SportTuner.com The Newbie Join Date: Dec 2009 Location: Fort Worth, Texas iTrader: (0) Posts: 23 Rep Power: 0	SportTuner is here! Hay Gang, I just wanted to take a moment and introduce myself to you all. I’m Anthony Bulger owner of SportTuner.com. Currently we’re working to get set up as a vendor on the forum here. Several of you may already know me and some may not so let me give you some back ground on me and my rotary life. Back in 1999 I along with Steve Kan, Tim Schulh, Stephen Edmundson started the DFW RX-7 Club. At that time I had my first 3rd Gen RX-7, however it wasn’t my first rotary car, I actually had been given a 1st gen with a bad motor several years before and at the time I was working for an exotics car shop in Dallas. We decided to gut the motor and drop in a 302 from a rolled mustang GT we had. The irony of this would come later but at this time Chris and Ari from Rotary Performance (RX7.com) where just starting out and we thought it would be fun to run it by and tease them about how to make a rotary car perform. Well the irony came when years later I would again be working alongside them (RX7.com) in the quest to dominate the NHRA Import racing scene with rotary powered cars. That year we finished 1st, 2nd, and 3rd place and soon the bug had bit me. I was asked to work with Ken Scheepers as Crew Chief for the next several years as he continued his racing career. During those years I built up my 3rd Gen and was honored with a magazine article in the Japanese publication of RX-7 Enthusiast my car was referred to as “Texas Style”. I finally took time away from the racing and worked to develop my business which I run now. Currently we service several of the most reputable tuners in the Rotary community, providing services all over the world. You may not know us by name but you have most likely seen or possibly own some of or products. I’m hoping to be welcomed to your community and offer my years of experience and love of the rotary and the goal to obtain maximum performance. If I can be of any help please don’t hesitate to call or ask. __________________ Anthony Bulger SportTuner.com

02-06-2010, 07:27 PM	#2
Viperx7 Rotary Fanatic Join Date: Feb 2008 Location: Richmond, KY iTrader: (2) Posts: 322 Rep Power: 17	Welcome to the Club. __________________ Mike Chrisman 83 Rx7 Turbo 85 Rx7 GS 89 Rx7 GTU http://www.cardomain.com/ride/409797 "Don't apoligize for being Patriotic, F**k 'em. TK"

02-07-2010, 02:54 PM	#3
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX iTrader: (4) Posts: 335 Rep Power: 17	welcome to the forum __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!

02-23-2010, 08:36 PM	#4
craig3x Rotary Fan in Training Join Date: Feb 2010 iTrader: (0) Posts: 37 Rep Power: 0	know any tuners in sacramento? __________________ 74 porsche 914 with 13b rotary http://www.youtube.com/watch?v=d0CUlLecxbo 73 914 porsche 1.7

02-23-2010, 09:11 PM	#5
SportTuner.com The Newbie Join Date: Dec 2009 Location: Fort Worth, Texas iTrader: (0) Posts: 23 Rep Power: 0	Sorry, I can't seem to think of anybody off the top of my head located in the Sacromento area. __________________ Anthony Bulger SportTuner.com

02-23-2010, 09:42 PM	#6
prrex4ever Rotary Fanatic Join Date: Oct 2008 iTrader: (1) Posts: 274 Rep Power: 17	I have to go check you out and get a couple of things powdercoated. I believe I met you at the last D/FW RX7 club meet.

02-23-2010, 09:47 PM	#7
SportTuner.com The Newbie Join Date: Dec 2009 Location: Fort Worth, Texas iTrader: (0) Posts: 23 Rep Power: 0	Sure, just give me a call before you head out since I'm not always at the shop (817)401-6772. __________________ Anthony Bulger SportTuner.com

04-11-2010, 03:26 AM	#8
Charlie Redden 17+ years... Join Date: Feb 2008 Location: Oahu iTrader: (0) Posts: 59 Rep Power: 17	Welcome! I know I am a little late, but buy from Anthony with confidence! He has either polished or coated multiple pieces in my engine bay (at least eight pieces) and all have come out better than I could have expected. Welcome to the forum Anthony. __________________ Charlie

04-13-2012, 01:27 PM	#9
Julian The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 3 Rep Power: 0	Just a good word in for the great coating job that Anthony and SportTuner.com just did for me on LIU.UIM, intake pipes Y-Pipe and fuel rails.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode