What is the thickest wheel spacer that I can use?

Rookie84 · 05-30-2008, 03:47 AM

I have a set of wheels that I'm considering but the offsets might be too high. So I was wondering what the max thickness of spacers can be before I have to replace the wheel studs with the longer ones, which is too much headache IMO. Also, I noticed our hub size is same as the Mitsubishi hub, so I'm assuming I can use hubcentric spacers made for Mistubishi's?

Thanks in advance.

N3philum · 06-17-2008, 03:00 AM

you can get hubcentric spacers that bolt on. Kics is the company i like. they are a bit expensive but they are great quality. just make sure you get the 5x114.3 bolt on spacer.

as far as the little shim style spacer.. anything over 5mm i would say is junk.. if your going any bigger than that just replace the studs or get the bolt on type.

05-30-2008, 03:47 AM	#1
Rookie84 The Newbie Join Date: Mar 2008 Posts: 16 Rep Power: 0	What is the thickest wheel spacer that I can use? I have a set of wheels that I'm considering but the offsets might be too high. So I was wondering what the max thickness of spacers can be before I have to replace the wheel studs with the longer ones, which is too much headache IMO. Also, I noticed our hub size is same as the Mitsubishi hub, so I'm assuming I can use hubcentric spacers made for Mistubishi's? Thanks in advance.

06-17-2008, 03:00 AM	#2
N3philum Unreliable Like a Rotary Join Date: May 2008 Location: Okinawa Japan Posts: 79 Rep Power: 17	you can get hubcentric spacers that bolt on. Kics is the company i like. they are a bit expensive but they are great quality. just make sure you get the 5x114.3 bolt on spacer. as far as the little shim style spacer.. anything over 5mm i would say is junk.. if your going any bigger than that just replace the studs or get the bolt on type. __________________