Diamond racing wheels

Hitman Cody2130 · 12-24-2010, 12:22 PM

I was looking at some of the crazy fitment cats on stancenation.com and noticed some old school looking steely wheels, I hopped on over to their site and come to find out they make wheels in 4x110 bolt pattern in the size and whatever offset that I want....

has anyone had any experience with them? I should be ordering my set here soon.

RotorDad · 12-24-2010, 03:32 PM

I have seen a few guys run them, they didn't look bad & if I remember they weren't that expensive.

sen2two · 12-24-2010, 03:36 PM

I have seen them on 1st gens, 2nd gens, all years of 240's, all years of corollas, and all types of Hondas, ect.

It's been done 100 times over. They are very hard to beat at the price and fitment is endless. If you get the real wheels, they are pretty light and decently cheap. But you can get look a likes that are pretty damn heavy for much cheaper. Depends on what your trying to do with your car.

Kentetsu · 12-30-2010, 02:00 PM

I've got a set. Lightweight, work great, can't beat the pricing.

.

Machado · 01-01-2011, 12:49 AM

I had some on my last RX-7, not bad at all.

Hitman Cody2130 · 01-01-2011, 09:53 PM

yeah, its decided, I am going to get my ZG flares, measure for fitment and then attempt to stuff 15x9 0 offset wheels under my car...

s2rxseven · 01-27-2011, 08:39 PM

man those rims a sweet, wat are they called an where can i get a set??

RX-7 Chris · 01-28-2011, 11:47 AM

http://www.diamondracingwheels.com/pro.html

TS87FC3S · 04-03-2011, 06:28 PM

Machados old car is now my car and i used wheel cleaner and they are no longer chrome, stripped the chrome to gunmetal, other then that love the rims

IH8DSM · 04-18-2011, 01:07 PM

Quote:

Originally Posted by Hitman Cody2130

yeah, its decided, I am going to get my ZG flares, measure for fitment and then attempt to stuff 15x9 0 offset wheels under my car...

hmm good luck haha

Kentetsu · 04-18-2011, 03:31 PM

I think with flares, 9" would be about right. Good luck with your mod.

IH8DSM · 04-18-2011, 03:34 PM

Fitting 9s with zg flares can be done but not with a zero offset unless your wanting to stretch tire or something. Mine are 15x8 0 offset, the fronts are flush and the rears are barely inside the flare.

eprx7 · 04-18-2011, 04:02 PM

I have a brand new set of Diamond racing wheels they are black steel wheels 15x7 not sure of the offset. I bought them for a race car project but haven't used them if you are interested in them pm me and see what we can work out.

eprx7 · 05-03-2011, 11:48 AM

Quote:

Originally Posted by eprx7

I have a brand new set of Diamond racing wheels they are black steel wheels 15x7 not sure of the offset. I bought them for a race car project but haven't used them if you are interested in them pm me and see what we can work out.

I sold the Diamond Racing wheels. disregard the last post.

Whizbang · 05-12-2011, 05:52 PM

dang! thats exactly what i have to buy here shortly. I have two 15x8 ones, but i need well two more, thinking just 15x7 for the front.

12-24-2010, 12:22 PM	#1
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	Diamond racing wheels I was looking at some of the crazy fitment cats on stancenation.com and noticed some old school looking steely wheels, I hopped on over to their site and come to find out they make wheels in 4x110 bolt pattern in the size and whatever offset that I want.... has anyone had any experience with them? I should be ordering my set here soon. __________________ Overkill is under-rated

12-24-2010, 03:32 PM	#2
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	I have seen a few guys run them, they didn't look bad & if I remember they weren't that expensive. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

12-24-2010, 03:36 PM	#3
sen2two KTEC Join Date: Jan 2009 Posts: 642 Rep Power: 0	I have seen them on 1st gens, 2nd gens, all years of 240's, all years of corollas, and all types of Hondas, ect. It's been done 100 times over. They are very hard to beat at the price and fitment is endless. If you get the real wheels, they are pretty light and decently cheap. But you can get look a likes that are pretty damn heavy for much cheaper. Depends on what your trying to do with your car. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

12-30-2010, 02:00 PM	#4
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan Posts: 530 Rep Power: 18	I've got a set. Lightweight, work great, can't beat the pricing. . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1

01-01-2011, 09:53 PM	#6
Hitman Cody2130 FB junkie Join Date: Dec 2010 Location: Washington state Posts: 28 Rep Power: 0	yeah, its decided, I am going to get my ZG flares, measure for fitment and then attempt to stuff 15x9 0 offset wheels under my car... __________________ Overkill is under-rated

01-01-2011, 12:49 AM	#5
Machado The Newbie Join Date: Nov 2010 Posts: 5 Rep Power: 0	I had some on my last RX-7, not bad at all.

01-27-2011, 08:39 PM	#7
s2rxseven Pulsin in a neighbourhood Join Date: Jan 2011 Location: Sunshine coast, Australia Posts: 3 Rep Power: 0	man those rims a sweet, wat are they called an where can i get a set??

01-28-2011, 11:47 AM	#8
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	http://www.diamondracingwheels.com/pro.html __________________ http://coloradomazdaclub.com 1984 RX-7 GSL-SE 1983 RX-7 GSL PARTING OUT + EXTRA 1964 Ford Galaxie 500XL 390 auto 1970 Ford F250 4x2 390 4bl C6

04-03-2011, 06:28 PM	#9
TS87FC3S Ask Me About My WANKEL!!! Join Date: Jan 2010 Location: Missouri Posts: 127 Rep Power: 16	Machados old car is now my car and i used wheel cleaner and they are no longer chrome, stripped the chrome to gunmetal, other then that love the rims __________________ 1984 Rx7 Gs - stripped interior re speed coil overs, tokico blues, re speed crossmemeber and mustang rack, diamond star racing wheels 1988 Rx7 Se - Sold 1988 Rx7 GXL - Sold

04-18-2011, 03:31 PM	#11
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan Posts: 530 Rep Power: 18	I think with flares, 9" would be about right. Good luck with your mod.

04-18-2011, 03:34 PM	#12
IH8DSM RCC Contributor Join Date: Mar 2008 Posts: 610 Rep Power: 18	Fitting 9s with zg flares can be done but not with a zero offset unless your wanting to stretch tire or something. Mine are 15x8 0 offset, the fronts are flush and the rears are barely inside the flare. __________________ 85 rx7 gsl-se - AA tags/ never ending project will never run

04-18-2011, 04:02 PM	#13
eprx7 Rotary Fan in Training Join Date: Sep 2008 Location: Copley, Oh Posts: 38 Rep Power: 0	I have a brand new set of Diamond racing wheels they are black steel wheels 15x7 not sure of the offset. I bought them for a race car project but haven't used them if you are interested in them pm me and see what we can work out. __________________ 1979 SA F Prepared solo/ Track day car 12a w/Weber carb,RB header and exhaust, Ground Control coilovers, camber/caster plates GforceEng.panhard rod w/ tri-link,Panasports wheels w/Hoosier slicks.

05-12-2011, 05:52 PM	#15
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	dang! thats exactly what i have to buy here shortly. I have two 15x8 ones, but i need well two more, thinking just 15x7 for the front. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook