s5 gauge cluster off 1000rpm with ls1 coils

NitroRacer · 03-09-2009, 10:13 PM

Ive posted on the other forum few months ago, never really got anywhere. So i will try here. Title pretty much explains it all. I have haltech e6x, set up with ls1 ignition coils. My gauge cluster will read 900 at idle and haltech will read almost 2000rpm. Is this a common problem, or has anyone ran into this before. Is there a way to calibrate stock tach to the haltech? blew last motor from shifting when rev limiter was heard...(yeah i know, slap on the hand). Anyways i prefer not to go with a MONSTER tach, but if i have to i will.
Let me know what your input is. When the vehicle was tuned, they used the dyno tach for readings.

vex · 03-09-2009, 10:18 PM

Where are you getting your signal for your tach and Haltech?

NitroRacer · 03-09-2009, 10:20 PM

aux output. wire going straight to the yellow wire with white stripe.

NitroRacer · 03-09-2009, 10:38 PM

ive heard about the v8 guys re calibrating stock tach to work with the v8s.

RETed · 03-12-2009, 06:29 AM

The stock tach signal came from the toggle off the trailing coil pack.
It fires like a V8.

What is the yellow with white stripe go to?
How are your coils configured to fire? Wastespark or direct fire?

-Ted

NitroRacer · 03-23-2009, 10:26 PM

im running wastespark. i have the tach wired into the haltech aux output.

BSC Motorsports · 03-25-2009, 06:58 AM

You need to set it up so it only sees spark from one rotor. When running off the trailing it only sees one because the trailing isn't wasted spark. In other words have the ignition events on a wasted spark system. Not sure exactly how you would go about it though, sorry.

Brent

03-09-2009, 10:13 PM	#1
NitroRacer Rotary Fan in Training Join Date: Mar 2008 Location: San Diego Posts: 35 Rep Power: 0	s5 gauge cluster off 1000rpm with ls1 coils Ive posted on the other forum few months ago, never really got anywhere. So i will try here. Title pretty much explains it all. I have haltech e6x, set up with ls1 ignition coils. My gauge cluster will read 900 at idle and haltech will read almost 2000rpm. Is this a common problem, or has anyone ran into this before. Is there a way to calibrate stock tach to the haltech? blew last motor from shifting when rev limiter was heard...(yeah i know, slap on the hand). Anyways i prefer not to go with a MONSTER tach, but if i have to i will. Let me know what your input is. When the vehicle was tuned, they used the dyno tach for readings.

03-09-2009, 10:18 PM	#2
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	Where are you getting your signal for your tach and Haltech? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-25-2009, 06:58 AM	#7
BSC Motorsports The Newbie Join Date: Feb 2009 Location: Innisfil Posts: 17 Rep Power: 0	You need to set it up so it only sees spark from one rotor. When running off the trailing it only sees one because the trailing isn't wasted spark. In other words have the ignition events on a wasted spark system. Not sure exactly how you would go about it though, sorry. Brent __________________ www.bscmotorsports.ca

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-09-2009, 10:20 PM	#3
NitroRacer Rotary Fan in Training Join Date: Mar 2008 Location: San Diego Posts: 35 Rep Power: 0	aux output. wire going straight to the yellow wire with white stripe.

03-09-2009, 10:38 PM	#4
NitroRacer Rotary Fan in Training Join Date: Mar 2008 Location: San Diego Posts: 35 Rep Power: 0	ive heard about the v8 guys re calibrating stock tach to work with the v8s.

03-23-2009, 10:26 PM	#6
NitroRacer Rotary Fan in Training Join Date: Mar 2008 Location: San Diego Posts: 35 Rep Power: 0	im running wastespark. i have the tach wired into the haltech aux output.