How to Fix your Rearend "Clunk"

Brent · 02-27-2008, 01:38 PM

http://www.maxcooper.com/rx7/how-to/...lls/index.html This is a great write up on how to change out your pillowball bushings to get rid of the clunk in your rearend.

Rearend clunk is normally caused by pillowball bushings going bad. You can get them from the Mazda dealer, part number is FD01-26-220. Sometimes the rear differential bushings go bad as well causing the driveline to feel sloppy. You can buy these from numerous other places/vendors. Feel free to chime in with your experience.

02-27-2008, 01:38 PM	#1
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	How to Fix your Rearend "Clunk" http://www.maxcooper.com/rx7/how-to/...lls/index.html This is a great write up on how to change out your pillowball bushings to get rid of the clunk in your rearend. Rearend clunk is normally caused by pillowball bushings going bad. You can get them from the Mazda dealer, part number is FD01-26-220. Sometimes the rear differential bushings go bad as well causing the driveline to feel sloppy. You can buy these from numerous other places/vendors. Feel free to chime in with your experience. __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode