Idler to replace airpump with single turbo

Garfinkles Motor Works · 12-27-2009, 07:13 PM

The idler I make is fully adjustable with a double row sealed bearing .It was designed to work with twins but by cutting the stock adjuster arm it will work with this SX setup for sure .The shorter belt is adjusted as stock,at the pulley and the alt .The unit can be adjusted for belt alinement and tension . I also made a new plate with a 90 degree fitting for the oil line to the turbo and modified the stock line so SS line does not have a loop in it as the kit had .

Tech B · 01-08-2010, 02:08 AM

Price????

Garfinkles Motor Works · 01-08-2010, 05:34 AM

Two hundred shipped in the US. This one has a double row bearing ( $56 ) so there will not be a twisting force pulling it out of alinement ,and the unit is fully adjustible .

01-08-2010, 02:08 AM	#2
Tech B The Newbie Join Date: Dec 2009 Posts: 20 Rep Power: 0	Price????

01-08-2010, 05:34 AM	#3
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Two hundred shipped in the US. This one has a double row bearing ( $56 ) so there will not be a twisting force pulling it out of alinement ,and the unit is fully adjustible .