|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Rotorhead
Join Date: Sep 2008
Location: "the town " Oakland
Posts: 219
Rep Power: 17 ![]() |
Fuel injector advice
its late and im tired but since my car still isn't running i managed to save about $300 bucks. now I am begining to think what should i spend it on... since i have noted I have flooded my car more than a few times over a period of a months and i've had fuel injectors in my car of unknown cond. Would it be a good Idea to send them off to Rc engineering for cleaning...? im begining to think its a good idea since i am dailying this car.. what ya'll think.. I thought i'd ask..
oh buy the way it still doesn't run and its too cold outside to work on it.. I have spark and air but i haven't check for fuel... Back to basics...
__________________
Currently running: 90 GTUs converted to S5 TurboII. Track car. 90 N/A GTUs.. Running project car 89 N/A GTUs in Black #2 10/6/18 Blown coolant seal undergoing rebuild and restomod. |
![]() |
![]() |
![]() |
#2 |
RCC Loves Me Not You
Join Date: Jul 2008
Location: Influx.
Posts: 2,113
Rep Power: 20 ![]() |
Check compression first. There's no sense in putting out money where it's not needed. IF you compression checks out send your injectors out to KG Parts. They're cheaper and they do a very good job. They cleaned out my injectors which had almost completely stopped flowing on the secondaries and only managed to flow about half of what they were supposed to be on the primaries. They cleaned them out and are still running strong (have been for a few months now though they recommend me not using them anymore).
I've sent all my injectors to them for cleaning and what not and they always do a bang up job. If however you'd like some freshly cleaned injectors I have 3 S4 NA's... you'd have to put in some resistors, but it'd be cheaper than shipping 4 of your out for cleaning either way.
__________________
The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group |
![]() |
![]() |
![]() |
#3 |
Reliable Source
Join Date: Nov 2008
Location: Michigan/Illinois
Posts: 336
Rep Power: 17 ![]() |
It only costs to get your injectors rebuilt for around 18-25 dollars an injector typically and it is a good thing to do since they are around 20 years old and may not have the proper spray pattern anymore amongst other issues.
|
![]() |
![]() |
![]() |
#4 |
Rotary Fan in Training
Join Date: Mar 2008
Posts: 38
Rep Power: 0 ![]() |
Yeah, but at $300 I would ensure that I would get the source of the problem first and then see if there is money left over for the injectors.
|
![]() |
![]() |
![]() |
#5 |
StarSpeedRacing
Join Date: Dec 2008
Location: California
Posts: 34
Rep Power: 0 ![]() |
Hit me Up rotary #10!
__________________
StarSpeedRacing Parts Development & Discount Parts! GB:FD Intercooler Kit GB:Stainless Non Turbo Headers Contact: StarSpeedRacing@gmail.com |
![]() |
![]() |
![]() |
Bookmarks |
|
|